Effect of sintering profile on densification, microstructure and mechanical properties of Al2O3-3YSZ-Ni composite

[1]  M. Zawrah,et al.  Improvement of wetability, sinterability, mechanical and electrical properties of Al2O3-Ni nanocomposites prepared by mechanical alloying , 2017 .

[2]  F. Golestani-Fard,et al.  Processing and properties of Ni dispersed zirconia toughened alumina , 2017 .

[3]  E. Pallone,et al.  Effect of sintering curves on the microstructure of alumina–zirconia nanocomposites , 2014 .

[4]  E. Burresi,et al.  Pressureless sintered silicon carbide with enhanced mechanical properties obtained by the two-step sintering method , 2014 .

[5]  Shigen Zhu,et al.  Two step hot pressing sintering of dense fine grained WC–Al2O3 composites , 2013 .

[6]  F. Golestani-Fard,et al.  Microstructural evolution of a commercial ultrafine alumina powder densified by different methods , 2011 .

[7]  Jun Ma,et al.  Two-step hot-pressing sintering of nanocomposite WC–MgO compacts , 2011 .

[8]  J. Ferreira,et al.  Influence of chemical composition on sintering ability of ZTA ceramics consolidated from freeze dried granules , 2011 .

[9]  R. German.  Coarsening in Sintering: Grain Shape Distribution, Grain Size Distribution, and Grain Growth Kinetics in Solid-Pore Systems , 2010 .

[10]  Zhihong Li,et al.  Synthesis and two-step sintering behavior of sol–gel derived nanocrystalline corundum abrasives , 2009 .

[11]  S. K. Sadrnezhaad,et al.  Two-step sintering of nanocrystalline 8Y2O3 stabilized ZrO2 synthesized by glycine nitrate process , 2009 .

[12]  Xin Wang,et al.  Effect of microstructure on the fracture behavior of micro–nano ZTA composite , 2008 .

[13]  J. Bartolomé,et al.  Damage tolerance and R-curve behavior of Al_2O_3–ZrO_2–Nb multiphase composites with synergistic toughening mechanism , 2008 .

[14]  T. Rao,et al.  Spark Plasma Sintering of Magnesia‐Doped Alumina with High Hardness and Fracture Toughness , 2007 .

[15]  Tsong‐Jen Yang,et al.  Minimum amount of nano-sized nickel particles to enhance the strength of alumina , 2007 .

[16]  I. Chen,et al.  Two‐Step Sintering of Ceramics with Constant Grain‐Size, I. Y2O3 , 2006 .

[17]  T. J. Yang,et al.  Preparation of Al2O3–ZrO2–Ni nanocomposite by pulse electric current and pressureless sintering , 2005 .

[18]  Byong-Taek Lee,et al.  Microstructural characterization of Al2O3–Ni composites prepared by electroless deposition , 2005 .

[19]  K. Niihara,et al.  Reduction and Sintering of a Nickel–Dispersed‐Alumina Composite and Its Properties , 2005 .

[20]  Patrick M. Kelly,et al.  Transformation Toughening in Zirconia‐Containing Ceramics , 2004 .

[21]  Jing-kun Guo,et al.  Microstructure and mechanical properties of Al2O3/Ni composites , 2004 .

[22]  Shinn-Yih Lee.  Sintering behavior and mechanical properties of injection-molded zirconia powder , 2004 .

[23]  O. Sbaizero,et al.  R-curve behavior of alumina toughened with molybdenum and zirconia particles , 2003 .

[24]  Jing-kun Guo,et al.  Fabrication, microstructure and mechanical properties of Al2O3/Ni nanocomposites by a chemical method , 2003 .

[25]  W. Tuan,et al.  Interactions between toughening mechanisms: Transformation toughening versus plastic deformation , 2002 .

[26]  R. Chen,et al.  Toughening alumina with both nickel and zirconia inclusions , 2000 .

[27]  I. Chen,et al.  Sintering dense nanocrystalline ceramics without final-stage grain growth , 2000, Nature.

[28]  O. Tillement,et al.  Alumina-chromium cermets by hot-pressing of nanocomposite powders , 1998 .

[29]  O. K. Tse,et al.  Sol–gel synthesis of ceramic matrix composites , 1998 .

[30]  John L. Johnson,et al.  Theoretical modeling of densification during activated solid-state sintering , 1996 .

[31]  W. Tuan,et al.  Preparation of composites by pressureless sintering in H2 , 1995 .

[32]  R. Brook,et al.  Processing of alumina/nickel composites , 1992 .

[33]  J. R. Jurado,et al.  Effect of Sintering Atmosphere on the Densification and Electrical Properties of Alumina , 1990 .

[34]  R. Brook,et al.  The toughening of alumina with nickel inclusions , 1990 .

[35]  John Wang,et al.  Zirconia-toughened alumina (ZTA) ceramics , 1989 .

[36]  F. Lange,et al.  Powder Processing Science and Technology for Increased Reliability , 1989 .

[37]  D. Hasselman,et al.  Evaluation ofKIc of brittle solids by the indentation method with low crack-to-indent ratios , 1982 .