Design optimisation for the vertical suspension of a crop sprayer boom

The dynamics of a vertical suspension for a 39 m wide boom on a John Deere crop sprayer was optimised. The optimisation was based on a mathematical model of the suspension with an existing non-linear Koni® damper characteristic. During the optimisation, several tracks, which are based on power spectral densities of measurements in different field conditions, are applied to the suspension. The objective function to be minimised is the standard deviation of the absolute boom rotation around the horizontal axis while applying the tracks. As the model is simple but accurate, computation time is small such that many different field situations can be imposed during optimisation. By playing with the distance to the rotation point of the damper and selection of the appropriate damping value, the optimum could be realised.

[1]  J. A. O'Sullivan,et al.  Verification and use of a mathematical model of an active twin link boom suspension , 1988 .

[2]  Hendrik Van Brussel,et al.  Mathematical modelling and comparison of several passive vertical spray boom suspensions , 1999 .

[3]  Herman Ramon,et al.  PM—Power and Machinery: Development of a Slow Active Suspension for Stabilizing the Roll of Spray Booms, Part 1: Hybrid Modelling , 2002 .

[4]  Jan Swevers,et al.  Sprayer boom motion, Part 1 : Derivation of the mathematical model using experimental system identification theory , 2000 .

[5]  Jan A. Snyman,et al.  Optimisation of road vehicle passive suspension systems. Part 1. Optimisation algorithm and vehicle model , 2003 .

[6]  J. De Baerdemaeker,et al.  Using principal gains for evaluating and optimizing the performance of sprayers , 1995 .

[7]  J. A. O'Sullivan.  Verification of passive and active versions of a mathematical model of a pendulum spray boom suspension , 1988 .

[8]  W. Thomson.  Theory of vibration with applications , 1965 .

[9]  Frédéric Lebeau,et al.  Measurements of the horizontal sprayer boom movements by sensor data fusion , 2002 .

[10]  Jan Anthonis.  Design and development of an active horizontal suspension for agricultural spray booms , 2000 .

[11]  Jan Anthonis,et al.  Comparison between the discrete and finite element methods for modelling an agricultural spray boom—Part 1: Theoretical derivation , 2003 .

[12]  Andreas Herbst Pamela Wolf.  Spray Deposit Distribution from Agricultural Boom Sprayers in Dynamic Conditions , 2001 .

[13]  H. Ramon,et al.  Spray Boom Motions and Spray Distribution: Part 1, Derivation of a Mathematical Relation , 1997 .

[14]  Jan Swevers,et al.  Modelling of sprayer boom dynamics by means of maximum likelihood identification techniques, part 2: Sensitivity-based mode shape normalisation , 2003 .

[15]  J. De Baerdemaeker,et al.  A modelling procedure for linearized motions of tree structured multibodies—1: Derivation of the equations of motion , 1996 .

[16]  Jan A. Snyman,et al.  Optimisation of road vehicle passive suspension systems. Part 2. Qualification and case study , 2003 .

[17]  Jan Anthonis,et al.  Comparison between the discrete and finite element methods for modelling an agricultural spray boom—Part 2: Automatic procedure for transforming the equations of motion from force to displacement input and validation , 2003 .

[18]  H. J. Nation.  The design and performance of a gimbal-type mounting for sprayer booms 1. Development procedure , 1987 .

[19]  Josse De Baerdemaeker,et al.  The Effects of Vertical Sprayer Boom Movements on the Uniformity of Spray Distribution , 1999 .

[20]  H. Ramon,et al.  Spray Boom Motions and Spray Distribution: Part 2, Experimental Validation of the Mathematical Relation and Simulation Results , 1997 .