Precise measurements of the Q factor of dielectric resonators in the transmission mode-accounting for noise, crosstalk, delay of uncalibrated lines, coupling loss, and coupling reactance

Accurate measurements of the unloaded Q/sub 0/ factor of microwave resonators are necessary in many microwave applications. The most accurate values of Q/sub 0/ can be obtained by Q-circle fits from multifrequency S-parameter data. Practical measurement systems cause S-parameters of the resonators to be distorted from the circular ideal shape, rotated, and shifted from the origin resulting in errors in the Q-factor values. A novel Q-factor measurement method has been developed based on equations derived for resonators working in the transmission mode and fractional linear circle-fitting techniques. The transmission-mode Q-factor (TMQF) technique removes measurement effects of noise, noncalibrated measurement cables, connectors, coupling structures, crosstalk between the coupling loops, and impedance mismatch from the measurement data. The TMQF is especially useful in cryogenic measurements of high-temperature superconducting thin films and dielectrics since these measurements are typically done in the transmission mode and contain cables and connectors that are difficult to calibrate. The accuracy of the TMQF is better than 1% for practical measurement ranges and the method is applicable to a wide range of coupling. The range of Q factors measurable is from 10/sup 3/ up to 10/sup 7/.

[1]  David Blair,et al.  An ultralow noise microwave oscillator based on a high-Q liquid nitrogen cooled sapphire resonator , 1996 .

[2]  Michael E. Tobar,et al.  Complex permittivity of some ultralow loss dielectric crystals at cryogenic temperatures , 1999 .

[3]  E. Martín,et al.  Unified and simplified treatment of techniques for characterising transmission, reflection or absorption resonators , 1990 .

[4]  Janina Mazierska,et al.  Dielectric resonator as a possible standard for characterization of high temperature superconducting films for microwave applications , 1997 .

[5]  Stuart A. Long,et al.  Power handling capabilities of superconducting YBCO thin films: Thermally induced nonlinearity effects , 1997 .

[6]  D. Blair,et al.  High-resolution measurement of the temperature-dependence of the Q, coupling and resonant frequency of a microwave resonator , 1996 .

[7]  J. Mazierska,et al.  Accurate Measurements of Surface Resistance of HTS Films Using a Novel Transmission Mode Q-Factor Technique , 2001 .

[8]  E. J. Vanzura,et al.  Resonant circuit model evaluation using reflected S-parameter data , 1991, [1991] Conference Record. IEEE Instrumentation and Measurement Technology Conference.

[9]  C. Wilker,et al.  A Sapphire Resonator for Microwave Characterization of Superconducting Thin Films , 1993, 41st ARFTG Conference Digest.

[10]  J. Aitken,et al.  Swept-frequency microwave Q-factor measurement , 1976 .

[11]  Darko Kajfez,et al.  Linear fractional curve fitting for measurement of high Q factors , 1994 .

[12]  M. C. Sanchez,et al.  New method for the measurement of coupling coefficients of transmission cavities , 1987 .

[13]  Y. Garault,et al.  Determination of Loaded, Unloaded, and External Quality Factors of a Dielectric Resonator Coupled to a Microstrip Line , 1983 .