Aspects of Testpiece Design Responsible for Errors in Cyclic Plasticity Experiments

A uniaxial cyclic plasticity copper testpiece has been simulated, using the Continuum Damage Mechanics based finite element programme Damage XX, under conditions of cyclic plasticity at temperatures of 20°C and 500°C. The results obtained have been compared with the results of experiments carried out under the same conditions. It has been shown that inhomogeneous fields of strain and stress are generated in the gauge length region of the testpiece, which result from standard cyclic plasticity testpiece features, namely, the blend radius linking testpiece shank and gauge length, and the extensometer ridges. The influence of these features on the inhomogeneity is exacerbated by the short gauge length which is necessary in cyclic plasticity testpieces to prevent buckling. At the temperatures of 20°C and 500°C, cracks were predicted to occur, and found experimentally, at the extensometer ridges. Testpiece failure at 20°C occurred outside the gauge length; and at 500°C failure took place from cracks growing within the gauge length region. The formation and growth of the latter gauge length crack was accurately predicted. The results obtained clearly demonstrate the dependence of cyclic plasticity data on testpiece design and suggest that the range of scatter observed experimentally in cyclic plasticity testing for nominally identical testing conditions may result from variations in testpiece design. This is of some concern, and the establishment of a methodology which overcomes these problems will be the subject of a future paper.

[1]  David R Hayhurst,et al.  Experimental and theoretical evaluation of a high-accuracy uni-axial creep testpiece with slit extensometer ridges , 1994 .

[2]  David R Hayhurst,et al.  Development of continuum damage in the creep rupture of notched bars , 1984, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[3]  D. R. Hayhurst,et al.  Automated procedures for the determination of high temperature viscoplastic damage constitutive equations , 1992, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[4]  J. Chaboche.  Continuum Damage Mechanics: Part II—Damage Growth, Crack Initiation, and Crack Growth , 1988 .

[5]  D. R. Hayhurst,et al.  Efficient cycle jumping techniques for the modelling of materials and structures under cyclic mechanical and thermal loading , 1994 .

[6]  D. Hayhurst,et al.  The standard ridged uniaxial testpiece: Computed accuracy of creep strain , 1993 .

[7]  F. Dunne,et al.  Continuum damage based constitutive equations for copper under high temperature creep and cyclic plasticity , 1992, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[8]  David R Hayhurst,et al.  Physically based temperature dependence of elastic-viscoplastic constitutive equations for copper between 20 and 500°C , 1996 .

[9]  D. R. Hayhurst,et al.  Creep rupture under tri-axial tension , 1986 .

[10]  David R Hayhurst,et al.  A new design of uniaxial creep testpiece with slit extensometer ridges for improved accuracy of strain measurement , 1993 .

[11]  M. J. Verrilli,et al.  Standardization Activities in TMF Test Methodologies , 1996 .

[12]  David R Hayhurst,et al.  Creep rupture under multi-axial states of stress , 1972 .

[13]  D. R. Hayhurst,et al.  Modelling of combined high-temperature creep and cyclic plasticity in components using continuum damage mechanics , 1992, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.