论文信息 - Time-Domain Homogenization of Windings in 2-D Finite Element Models

Time-Domain Homogenization of Windings in 2-D Finite Element Models

In this paper, the authors propose an original time-domain extension of the frequency-domain homogenization of multiturn windings in finite element (FE) models. For the winding type in hand (e.g., round conductor with hexagonal packing), an elementary FE model is used for determining dimensionless frequency and time-domain coefficients regarding skin and proximity effect. These coefficients are readily utilized for homogenizing the winding in the FE model of the complete device. The method is successfully applied to an axisymmetric 103-turn inductor. The results agree very well with those obtained by an accurate but very expensive FE model in which all turns are finely discretized

J. Gyselinck | P. Dular | R.V. Sabariego

[1] J. Gyselinck,et al. Frequency-domain homogenization of bundles of wires in 2-D magnetodynamic FE calculations , 2005, IEEE Transactions on Magnetics.

[2] L. Popiel,et al. Proximity Losses CO ~utation with a 2 Complex Permeability Modelling , 1998 .

[3] A. Podoltsev,et al. Analysis of effective resistance and eddy-current losses in multiturn winding of high-frequency magnetic components , 2003 .

[4] P. L. Dowell,et al. Effects of eddy currents in transformer windings , 1966 .

[5] G. Meunier,et al. A General Purpose Method for Electric and Magnetic Combined Problems for 2D, Axisymmetric and Transient Systems , 1992, Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation.

[6] Jan Abraham Ferreira,et al. Improved analytical modeling of conductive losses in magnetic components , 1994 .

[7] Charles R. Sullivan,et al. Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or three-dimensional field geometry , 2001 .