Effect of Antioxidants on the Stability of Poly(ether ether ketone) and the Investigation on the Effect Mechanism of the Antioxidants to Poly(ether ether ketone)
暂无分享,去创建一个
[1] P. Malanowski,et al. Photo-degradation of poly(neopentyl isophthalate). Part II: Mechanism of cross-linking , 2011 .
[2] Y. Maekawa,et al. Radiation-induced graft polymerization of functional monomer into poly(ether ether ketone) film and structure-property analysis of the grafted membrane , 2011 .
[3] T. Tang,et al. Structure and Properties of High Melt Strength Polypropylene Prepared by Combined Method of Blending and Crosslinking , 2010 .
[4] T. Hull,et al. Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies , 2010 .
[5] G. Nagy,et al. Melt stabilisation of Phillips type polyethylene, Part II: Correlation between additive consumption and polymer properties , 2009 .
[6] B. Haworth,et al. Preparation of polypropylene–clay nanocomposites by the co-intercalation of modified polypropylene and short-chain amide molecules , 2009 .
[7] G. Nagy,et al. Melt stabilisation of Phillips type polyethylene, Part I: The role of phenolic and phosphorous antioxidants , 2009 .
[8] N. Sombatsompop,et al. Improvement of Structural and Thermal Stabilities of PVC and Wood/PVC Composite by Zn and Pb Stearates, and Zeolite , 2008 .
[9] J. Kalfus,et al. Degradation of polypropylene impact-copolymer during processing , 2008 .
[10] R. Scaffaro,et al. Effect of the additive level and of the processing temperature on the re-building of post-consumer pipes from polyethylene blends , 2007 .
[11] Xigui Yue,et al. Synthesis and Characterization of Poly(ether ether ketone)s with (2,5‐dihydroxy)phenyl Side Group , 2007 .
[12] B. Pukánszky,et al. Efficiency and mechanism of phosphorous antioxidants in Phillips type polyethylene , 2006 .
[13] E. Grard,et al. Rheological properties of silicon polymer networks: The influence of the crosslink density , 2003 .
[14] J. Xu,et al. Thermal degradation of polypropylene in a capillary rheometer , 2003 .
[15] L. D. Kandpal,et al. Poly(ether ether ketone)/poly(aryl ether sulphone) blends: thermal degradation behaviour , 2003 .
[16] N. Billingham,et al. Influence of testing conditions on the performance and durability of polymer stabilisers in thermal oxidation , 2003 .
[17] C. Hamciuc,et al. SULFONATED POLY(ETHER-KETONE)S CONTAINING HEXAFLUOROISOPROPYLIDENE GROUPS , 2001 .
[18] N. Tsutsumi,et al. ESR studies of photosensitized degradation of poly(L‐lactic acid) via photoionization of dopant , 2001 .
[19] H. M. Banford,et al. The effects on polyetheretherketone and polyethersulfone of electron and /spl gamma/ irradiation , 1999 .
[20] S. Girois,et al. Polym. Degrad. Stab. , 1996 .
[21] Klaus Friedrich,et al. Recent advances in polymer composites' tribology , 1995 .
[22] K. Schwetlick,et al. Organophosphorus antioxidants action mechanisms and new trends , 1995 .
[23] K. Dušek,et al. Side Reactions in the Formation of Polyurethanes: Stability of Reaction Products of Phenyl Isocyanate , 1990 .
[24] D. M. Wiles,et al. The thermal stability of poly(aryl-ether–ether-ketone) as assessed by thermogravimetry† , 1989 .
[25] D. Wiles,et al. The kinetics of the oxidattve degradation of poly(aryl-ether-ether-ketone) (PEEK) , 1989 .
[26] J. N. Hay,et al. Thermal decomposition of poly(aryl ether ketones) , 1987 .
[27] G. Scott,et al. Mechano-chemical reactions of polymers. formation of free radicals in stressed rubber , 1971 .