Recent advances on Energy Storage Systems

Energy storage systems (ESSs) are enabling technologies for well-established and new applications such as power peak shaving, electric vehicles, integration of renewable energies, etc. This paper presents a review of ESSs for transport and grid applications, covering several aspects such as the storage technology and their main applications providing a description of the systems and addressing the most suitable storage technology. This paper is based on the experience of the co-organizers of the Special Session on Energy Storage Systems of the IEEE Transactions on Industrial Electronics published in december 2010.

[1]  Srdjan M. Lukic,et al.  Energy Storage Systems for Transport and Grid Applications , 2010, IEEE Transactions on Industrial Electronics.

[2]  Haichang Liu,et al.  Flywheel energy storage—An upswing technology for energy sustainability , 2007 .

[3]  Benoit Robyns,et al.  Experimental Validation of Energy Storage System Management Strategies for a Local DC Distribution System of More Electric Aircraft , 2010, IEEE Transactions on Industrial Electronics.

[4]  D. Iannuzzi,et al.  Speed-Based State-of-Charge Tracking Control for Metro Trains With Onboard Supercapacitors , 2012, IEEE Transactions on Power Electronics.

[5]  Hamid Gualous,et al.  Design and New Control of DC/DC Converters to Share Energy Between Supercapacitors and Batteries in Hybrid Vehicles , 2008, IEEE Transactions on Vehicular Technology.

[6]  Jean-Michel Vinassa,et al.  Embedded Fractional Nonlinear Supercapacitor Model and Its Parametric Estimation Method , 2010, IEEE Transactions on Industrial Electronics.

[7]  Seung-Ki Sul,et al.  System Integration and Power-Flow Management for a Series Hybrid Electric Vehicle Using Supercapacitors and Batteries , 2008, IEEE Transactions on Industry Applications.

[8]  Ulf Bossel,et al.  Does a Hydrogen Economy Make Sense? , 2006, Proceedings of the IEEE.

[9]  Alfred Rufer,et al.  A Hybrid Energy Storage System Based on Compressed Air and Supercapacitors With Maximum Efficiency Point Tracking (MEPT) , 2006, IEEE Transactions on Industrial Electronics.

[10]  T. Ise,et al.  A hybrid energy storage with a SMES and secondary battery , 2005, IEEE Transactions on Applied Superconductivity.

[11]  R. Boom,et al.  Superconductive energy storage for power systems , 1972 .

[12]  A Emadi,et al.  Batteries Need Electronics , 2011, IEEE Industrial Electronics Magazine.

[13]  Luis M. Fernández,et al.  Energy Management System of Fuel-Cell-Battery Hybrid Tramway , 2010, IEEE Transactions on Industrial Electronics.

[14]  M.M. Flynn,et al.  Saving energy using flywheels , 2008, IEEE Industry Applications Magazine.

[15]  Hirofumi Akagi,et al.  Topology and application of bidirectional isolated dc-dc converters , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[16]  Pascal Venet,et al.  Study of Accelerated Aging of Supercapacitors for Transport Applications , 2010, IEEE Transactions on Industrial Electronics.

[17]  Bo Yang,et al.  On the use of energy storage technologies for regulation services in electric power systems with significant penetration of wind energy , 2008, 2008 5th International Conference on the European Electricity Market.

[18]  Yi-Hwa Liu,et al.  Search for an Optimal Rapid-Charging Pattern for Li-Ion Batteries Using the Taguchi Approach , 2010, IEEE Transactions on Industrial Electronics.

[19]  Prasad N. Enjeti,et al.  Design of a wide input range DC-DC converter with a robust power control scheme suitable for fuel cell power conversion , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[20]  Géza Joós,et al.  An Online Control Algorithm for Application of a Hybrid ESS to a Wind–Diesel System , 2010, IEEE Transactions on Industrial Electronics.

[21]  Philippe Delarue,et al.  Energy Storage System With Supercapacitor for an Innovative Subway , 2010, IEEE Transactions on Industrial Electronics.

[22]  G. Pistoia,et al.  Lithium batteries : science and technology , 2003 .

[23]  Srdjan M. Lukic,et al.  Energy Storage Systems for Automotive Applications , 2008, IEEE Transactions on Industrial Electronics.

[24]  John Lowry,et al.  Electric Vehicle Technology Explained , 2003 .

[25]  José M. Blanes,et al.  High-Power Battery Discharge Regulator for Space Applications , 2010, IEEE Transactions on Industrial Electronics.

[26]  Stig Munk-Nielsen,et al.  Cascaded H-bridge with bidirectional boost converters for energy storage , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[27]  Shyh-Jier Huang,et al.  Design of an Inverter Array for Distributed Generations With Flexible Capacity Operations , 2010, IEEE Transactions on Industrial Electronics.

[28]  Olivier Bethoux,et al.  > Replace This Line with Your Paper Identification Number (double-click Here to Edit) < 1 , 2001 .

[29]  R. W. Boom.  Superconductive magnetic energy storage for electric utilities-a review of the 20 year Wisconsin program , 1990, Proceedings of the 34th International Power Sources Symposium.

[30]  Sheldon S. Williamson,et al.  Design, Testing, and Validation of a Simplified Control Scheme for a Novel Plug-In Hybrid Electric Vehicle Battery Cell Equalizer , 2010, IEEE Transactions on Industrial Electronics.

[31]  Mike Barnes,et al.  The Impact of Transport Electrification on Electrical Networks , 2010, IEEE Transactions on Industrial Electronics.

[32]  Robert E. Hebner,et al.  Flywheel batteries come around again , 2002 .

[33]  S. Lukic.  Charging ahead , 2008, IEEE Industrial Electronics Magazine.

[34]  Nassim Rizoug,et al.  Modeling and Characterizing Supercapacitors Using an Online Method , 2010, IEEE Transactions on Industrial Electronics.

[35]  A. Oudalov,et al.  Utility Scale Applications of Energy Storage , 2008, 2008 IEEE Energy 2030 Conference.

[36]  Hans Bernhoff,et al.  Flywheel energy and power storage systems , 2007 .

[37]  Jorge Moreno,et al.  Ultracapacitor-Based Auxiliary Energy System for an Electric Vehicle: Implementation and Evaluation , 2007, IEEE Transactions on Industrial Electronics.

[38]  Eric Woirgard,et al.  Principle, design and experimental validation of a flywheel-battery hybrid source for heavy-duty electric vehicles , 2007 .

[39]  Jean-Philippe Martin,et al.  High Voltage Ratio DC–DC Converter for Fuel-Cell Applications , 2010, IEEE Transactions on Industrial Electronics.

[40]  James A. Andrews,et al.  Advances in Flywheel Energy- Storage Systems , 2001 .

[41]  R. G. Lawrence,et al.  Flywheel UPS , 2003 .