论文信息 - Hybrid High Speed Machining (HSM): System Design and Experimental Results for Grinding/HSM and EDM/HSM

Hybrid High Speed Machining (HSM): System Design and Experimental Results for Grinding/HSM and EDM/HSM

Abstract Point grinding and electrical discharge machining (EDM) are detailed on high speed machining centres. A Taguchi design was employed to evaluate operating parameters when point grinding (plunge) nickel-based superalloys with 15 mm diameter electroplated diamond and cubic boron nitride (CBN) wheels using speeds up to 60,000 rpm provided by an ancillary spindle. Material removal of up to 120 cm 3 and roughness values down to 1.2 μm Ra were obtained when machining Inconel 718. A retrofit EDM servo head unit was designed for die sinking and workpiece surface texturing. When texturing 2D and 3D workpieces, surfaces were produced with an Ra of 1-10 μm, depending on operating parameters.

[1] Eiji Shamoto,et al. Ultaprecision Diamond Cutting of Hardened Steel by Applying Elliptical Vibration Cutting , 1999 .

[2] Katsuhiro Maekawa,et al. Plasma hot machining for new engineering materials , 1990 .

[3] H. K. Tönshoff,et al. Die manufacturing by 5- and 3-axes milling: Influence of surface shape on cutting conditions , 1989 .

[4] Taylan Altan,et al. Advanced Techniques for Die and Mold Manufacturing , 1993 .

[5] Herbert Schulz,et al. High-Speed Machining , 1992 .

[6] F. Jovane,et al. Reconfigurable Manufacturing Systems , 1999 .

[7] K. J. Stout,et al. Electrical discharge texturing , 1992 .

[8] A. Moisan,et al. A Study of the Effect of Synchronizing Ultrasonic Vibrations with Pulses in EDM , 1991 .

[9] David K. Aspinwall,et al. Surface alloying using PM composite electrode materials when electrical discharge texturing hardened AISI D2 , 2002 .

[10] T. I. El-Wardany,et al. High-Speed Milling of Dies and Molds in Their Hardened State , 1997 .