Multi-Scale Modelling of Flexible End Plate Connections under Fire Conditions

Conducting experimental tests is an attractive and straight-forward research approach but is time-consuming and expensive in comparison with finite element modelling. A numerical approach has been developed in this project to investigate the performance of simple steel connections in fire conditions. This paper presents a quasi-static numerical analysis with cohesive elements to investigate the resistance and ductility (rotation capacity) of simple steel connections (flexible end plates) in fire conditions. In comparison with experimental test data, a good correlation with the finite ele- ment analysis is achieved and the method is suitable to study the tying resistance and ductility for simple steel connections with various dimensions at different temperatures. This numerical approach was also compared with component-based connection models, which have been developed in the previous research work. The analytical results produced demonstrated that the component-based approach is capable of as an alternative method to analyse the connection performance under fire and non-fire conditions, and this approach is sim- ple but without loss of accuracy.

[1]  Yong Wang,et al.  Steel and Composite Structures: Behaviour and Design for Fire Safety , 2002 .

[2]  K. Bathe.  Finite Element Procedures , 1995 .

[3]  Archibald N. Sherbourne,et al.  3D Simulation of End-Plate Bolted Connections , 1994 .

[4]  Marwan Sarraj,et al.  The behaviour of steel fin plate connections in fire , 2007 .

[5]  Ian Burgess,et al.  EXPERIMENTAL STUDY ON FLEXIBLE END PLATE CONNECTIONS IN FIRE , 2008 .

[6]  Chanakya Arya,et al.  Eurocode 3: Design of steel structures , 2018, Design of Structural Elements.

[7]  Robert Charlier,et al.  NUMERICAL MODELLISATION OF CONTACT WITH FRICTION PHENOMENA BY THE FINITE ELEMENT METHOD , 1990 .

[8]  Ali Abolmaali,et al.  End-plate connection moment-rotation relationship , 1987 .

[9]  Jean-Pierre Jaspart,et al.  Basic issues in the finite element simulation of extended end plate connections , 1998 .

[10]  N. Krishnamurthy,et al.  Correlation between 2- and 3-dimensional finite element analysis of steel bolted end-plate connections☆ , 1976 .

[11]  Ian Burgess,et al.  Component modelling of flexible end-plate connections in fire , 2009 .

[12]  I. Scheider,et al.  On the practical application of the cohesive model , 2003 .

[13]  Ingo Scheider,et al.  Crack propagation analyses with CTOA and cohesive model: Comparison and experimental validation , 2013 .

[14]  Ian Burgess,et al.  Experimental investigation of the behaviour of fin plate connections in fire , 2009 .

[15]  J. B. Davison,et al.  EXPERIMENTAL INVESTIGATION OF THE BEHAVIOUR OF FLUSH ENDPLATE CONNECTIONS IN FIRE , 2008 .

[16]  M. A O'Connor,et al.  Behaviour of a Multi-storey Steel Framed Building Subjected to Fire Attack , 1998 .

[17]  T. Belytschko,et al.  A uniform strain hexahedron and quadrilateral with orthogonal hourglass control , 1981 .

[18]  Norbert Gebbeken,et al.  On the numerical analysis of endplate connections , 1994 .

[19]  Jean-Pierre Jaspart,et al.  Benchmarks for finite element modelling of bolted steel connections , 1997 .

[20]  Jean-Pierre Jaspart,et al.  The stiffness model of revised annex j of eurocode 3 , 1996 .

[21]  G. J. van der Vegte.  NUMERICAL SIMULATIONS OF BOLTED CONNECTIONS : THE IMPLICIT VERSUS THE EXPLICIT APPROACH , 2004 .

[22]  Archibald N. Sherbourne,et al.  Finite Element Prediction of End Plate Bolted Connection Behavior. I: Parametric Study , 1997 .

[23]  Roger J. Plank,et al.  Tying capacity of web cleat connections in fire, Part 1: Test and finite element simulation , 2009 .

[24]  Asif Usmani,et al.  Modelling of heated composite floor slabs with reference to the Cardington experiments , 2001 .