A standard reference for chamber testing of material VOC emissions: Design principle and performance

Abstract Environmental chambers are widely used to test formaldehyde and other volatile organic compound (VOC) emissions from indoor materials and furniture. However, there is a lack of a proven method to assess the precision of the test results of the chamber system. In this paper, we describe a new standard reference, LIFE (liquid-inner tube diffusion-film-emission), to address this problem. This reference has the following salient features: (1) Constant emission rate, with less than 3.0% change with an ambient airflow speed (>0.014 m/s) at furniture emission range (0.1–1.0 mg/m 3 in a 30 m 3 chamber with air change rate of 1/h) under standard chamber test conditions as specified by ISO 16000-9 (23 °C, 50% RH); (2) Long duration of emissions, on the order of 1000 h; (3) Easy to store, apply and maintain. The design principle and criteria of the LIFE reference are presented. An analytical model and dimensionless analysis were applied to optimize the factors influencing the emission rate, and experiments were conducted to validate the analytical results. In addition, the equivalent emission parameters of the reference, i.e., the initial emittable concentration, the diffusion coefficient and the partition coefficient, were determined through a three-parameter optimizing regression. This can then be used to check the reliability of a chamber method for testing these three parameters. The developed standard reference should prove useful for calibrating chamber systems for indoor material/furniture VOC emissions tests.

[1]  Cynthia Howard-Reed,et al.  Diffusion-controlled reference material for volatile organic compound emissions testing: Pilot inter , 2011 .

[2]  Zhishi Guo,et al.  Review of indoor emission source models. Part 2. Parameter estimation. , 2002, Environmental pollution.

[3]  Qinqin Deng,et al.  Study on a new correlation between diffusion coefficient and temperature in porous building materials , 2009 .

[4]  Xin Wang,et al.  New concepts and approach for developing energy efficient buildings: Ideal specific heat for building internal thermal mass , 2011 .

[5]  Yinping Zhang,et al.  Influence of temperature on formaldehyde emission parameters of dry building materials , 2007 .

[6]  S Kirchner,et al.  State-of-the-art in the measurement of volatile organic compounds emitted from building products: results of European interlaboratory comparison. , 1999, Indoor air.

[7]  Ying Xu,et al.  Predicting emissions of SVOCs from polymeric materials and their interaction with airborne particles. , 2006, Environmental science & technology.

[8]  Fariborz Haghighat,et al.  Modelling of emission of volatile organic compounds from building materials—estimation of gas-phase mass transfer coefficient , 1999 .

[9]  J C Little,et al.  Diffusion-controlled reference material for VOC emissions testing: proof of concept. , 2010, Indoor air.

[10]  Ying Xu,et al.  An improved mass transfer based model for analyzing VOC emissions from building materials , 2003 .

[11]  Bernhard Rappenglück,et al.  The first VOC intercomparison exercise within the Global Atmosphere Watch (GAW) , 2006 .

[12]  Yuan Yao,et al.  C-history method: rapid measurement of the initial emittable concentration, diffusion and partition coefficients for formaldehyde and VOCs in building materials. , 2011, Environmental science & technology.

[13]  Ge Yan.  Interpretation of Standard BIFMA M7.1-2007 Test Method for Determining VOC Emissions from Office Furniture Systems,Components and Seats , 2012 .

[14]  John Aurie Dean,et al.  Lange's Handbook of Chemistry , 1978 .

[15]  Wang Xin.  Design and Evaluation of Full-scale Chamber for Determining Chemical Contaminant Emissions from Indoor Materials/Products , 2010 .

[16]  Ashok J. Gadgil,et al.  Modeling Emissions of Volatile Organic Compounds from New Carpets , 1994 .

[17]  Chang Nyung Kim,et al.  An analytical model for VOCs emission from dry building materials , 2004 .

[18]  F Haghighat,et al.  A study on VOC source and sink behavior in porous building materials - analytical model development and assessment. , 2005, Indoor air.

[19]  Wei Wen.  Standard Toluene Emission Source for Calibrating Chamber Testing System , 2011 .

[20]  Zhongkai He,et al.  Dynamic—static Chamber Method for Simultaneous Measurement of the Diffusion and Partition Coefficients of VOCs in Barrier Layers of Building Materials , 2010 .

[21]  Zhishi Guo,et al.  Review of indoor emission source models. Part 1. Overview. , 2002, Environmental pollution.