Fundamental investigation of sustained and controlled therapeutics release from 3D printed medical devices
暂无分享,去创建一个
S. R. Benhabbour | I. Young | M. Bis | R. Janusziewicz | R. Shrivastava | D.K. Dahl | A. N. Whitesell
[1] A. Goodey,et al. Safety and pharmacokinetics of islatravir subdermal implant for HIV-1 pre-exposure prophylaxis: a randomized, placebo-controlled phase 1 trial , 2021, Nature Medicine.
[2] R. Mogg,et al. Safety, tolerability, and pharmacokinetics of single‐ and multiple‐dose administration of islatravir (MK‐8591) in adults without HIV , 2021, Clinical and translational science.
[3] D. Kulkarni,et al. Development, optimization and pharmacokinetic evaluation of biphasic extended-release osmotic drug delivery system of trospium chloride for promising application in treatment of overactive bladder , 2021, Future Journal of Pharmaceutical Sciences.
[4] D. Burgess,et al. Drug Release from In Situ Forming Implants and Advances in Release Testing. , 2021, Advanced drug delivery reviews.
[5] S. Montgomery,et al. Biodegradable Polymeric Solid Implants for Ultra-Long-Acting Delivery of Single or Multiple Antiretroviral Drugs. , 2021, International journal of pharmaceutics.
[6] H. Santos,et al. Combination Therapy of Killing Diseases by Injectable Hydrogels: From Concept to Medical Applications , 2020, Advanced healthcare materials.
[7] D. Burgess,et al. Effect of implant formation on drug release kinetics of in situ forming implants. , 2020, International journal of pharmaceutics.
[8] C. Flexner,et al. LONG-ACTING DRUGS AND FORMULATIONS FOR THE TREATMENT AND PREVENTION OF HIV. , 2020, International journal of antimicrobial agents.
[9] Pamela Robles Martinez,et al. Vat photopolymerization 3D printing for advanced drug delivery and medical device applications. , 2020, Journal of controlled release : official journal of the Controlled Release Society.
[10] Ziyaur Rahman,et al. 3D printing for drug delivery and biomedical applications. , 2020, Drug discovery today.
[11] S. Mecham,et al. Design and Characterization of a Novel Series of Geometrically Complex Intravaginal Rings with Digital Light Synthesis , 2020, Advanced materials technologies.
[12] C. Ladavière,et al. Chitosan hydrogels for sustained drug delivery. , 2020, Journal of controlled release : official journal of the Controlled Release Society.
[13] S. Tuukkanen,et al. Modulating sustained drug release from nanocellulose hydrogel by adjusting the inner geometry of implantable capsules , 2020 .
[14] Liwei Lin,et al. Stereolithography (SLA) 3D Printing of Ascorbic Acid Loaded Hydrogels: A Controlled Release Study. , 2020, International journal of pharmaceutics.
[15] Jianzhong Fu,et al. A Review of 3D Printing Technologies for Soft Polymer Materials , 2020, Advanced Functional Materials.
[16] K. Kador,et al. Characterization of extracellular matrix modified poly(ε-caprolactone) electrospun scaffolds with differing fiber orientations for corneal stroma regeneration. , 2020, Materials science & engineering. C, Materials for biological applications.
[17] Wei Sun,et al. Design, modeling and 3D printing of a personalized cervix tissue implant with protein release function , 2020, Biomedical materials.
[18] A. Nandi,et al. A review on recent advances in polymer and peptide hydrogels. , 2020, Soft matter.
[19] Heang Kuan Joel Tan,et al. Process–Structure–Properties in Polymer Additive Manufacturing via Material Extrusion: A Review , 2020, Critical Reviews in Solid State and Materials Sciences.
[20] C. Flexner,et al. Long-acting implants to treat and prevent HIV infection. , 2019, Current opinion in HIV and AIDS.
[21] Haoxiang Chen,et al. E-Jet 3D-Printed Scaffolds as Sustained Multi-Drug Delivery Vehicles in Breast Cancer Therapy , 2019, Pharmaceutical Research.
[22] Svetlana Ibrić,et al. Hydrophilic excipients in digital light processing (DLP) printing of sustained release tablets: impact on internal structure and drug dissolution rate. , 2019, International journal of pharmaceutics.
[23] Paul A Dayton,et al. Ultra-long-acting tunable biodegradable and removable controlled release implants for drug delivery , 2019, Nature Communications.
[24] Albert C. To,et al. Part-scale build orientation optimization for minimizing residual stress and support volume for metal additive manufacturing: Theory and experimental validation , 2019, Comput. Aided Des..
[25] R. Langer,et al. Polymers for extended-release administration , 2019, Biomedical Microdevices.
[26] F. Lin,et al. Drug-loaded hyaluronic acid hydrogel as a sustained-release regimen with dual effects in early intervention of tendinopathy , 2019, Scientific Reports.
[27] S. H. Mian,et al. Additive manufacturing: Challenges, trends, and applications , 2019, Advances in Mechanical Engineering.
[28] R. Landovitz,et al. Long-acting injectable cabotegravir for the prevention of HIV infection. , 2020, Current opinion in HIV and AIDS.
[29] Qian Yan,et al. A Review of 3D Printing Technology for Medical Applications , 2018, Engineering.
[30] Abdul W. Basit,et al. 3D printing of drug‐loaded gyroid lattices using selective laser sintering , 2018, International journal of pharmaceutics.
[31] Marian E. Gindy,et al. Extended-Duration MK-8591-Eluting Implant as a Candidate for HIV Treatment and Prevention , 2018, Antimicrobial Agents and Chemotherapy.
[32] S. Sarafianos,et al. 4′-Ethynyl-2-fluoro-2′-deoxyadenosine, MK-8591: a novel HIV-1 reverse transcriptase translocation inhibitor , 2018, Current opinion in HIV and AIDS.
[33] Joseph M. DeSimone,et al. Controlling release from 3D printed medical devices using CLIP and drug‐loaded liquid resins , 2018, Journal of controlled release : official journal of the Controlled Release Society.
[34] Feng Zhang,et al. Sustained Release Drug Delivery Applications of Polyurethanes , 2018, Pharmaceutics.
[35] Waqar Ahmed,et al. Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets , 2018, Journal of controlled release : official journal of the Controlled Release Society.
[36] Justin Poelma,et al. Rethinking digital manufacturing with polymers , 2017, Science.
[37] Yi Li,et al. Injectable hydrogels for sustained release of therapeutic agents☆ , 2017, Journal of controlled release : official journal of the Controlled Release Society.
[38] Ian Ashcroft,et al. 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release , 2017, Journal of controlled release : official journal of the Controlled Release Society.
[39] C. V. van Blitterswijk,et al. Tailoring surface nanoroughness of electrospun scaffolds for skeletal tissue engineering. , 2017, Acta biomaterialia.
[40] K. Wong,et al. Electrospun polymeric micro/nanofibrous scaffolds for long-term drug release and their biomedical applications. , 2017, Drug discovery today.
[41] R. Mülhaupt,et al. Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.
[42] Hongyu Chai,et al. Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone , 2017, Scientific Reports.
[43] Jason A. Burdick,et al. Engineered Hydrogels for Local and Sustained Delivery of RNA‐Interference Therapies , 2017, Advanced healthcare materials.
[44] D. Friend. Development of controlled release systems over the past 50years in the area of contraception. , 2016, Journal of controlled release : official journal of the Controlled Release Society.
[45] Joseph M DeSimone,et al. Layerless fabrication with continuous liquid interface production , 2016, Proceedings of the National Academy of Sciences.
[46] Joseph M. DeSimone,et al. Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production , 2016, PloS one.
[47] Shih-Feng Chou,et al. Current strategies for sustaining drug release from electrospun nanofibers. , 2015, Journal of controlled release : official journal of the Controlled Release Society.
[48] Charlie C. L. Wang,et al. The status, challenges, and future of additive manufacturing in engineering , 2015, Comput. Aided Des..
[49] Quang Vinh Nguyen,et al. Injectable polymeric hydrogels for the delivery of therapeutic agents: A review , 2015 .
[50] John R. Tumbleston,et al. Continuous liquid interface production of 3D objects , 2015, Science.
[51] M. A. Alhnan,et al. Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing. , 2015, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.
[52] M. D. Monzón,et al. Standardization in additive manufacturing: activities carried out by international organizations and projects , 2015 .
[53] Andrew D. Huber,et al. 4′-Ethynyl-2-fluoro-2′-deoxyadenosine (EFdA) Inhibits HIV-1 Reverse Transcriptase with Multiple Mechanisms* , 2014, The Journal of Biological Chemistry.
[54] David S Jones,et al. Solvent induced phase inversion-based in situ forming controlled release drug delivery implants. , 2014, Journal of controlled release : official journal of the Controlled Release Society.
[55] V. Pillay,et al. A Review of the Effect of Processing Variables on the Fabrication of Electrospun Nanofibers for Drug Delivery Applications , 2013 .
[56] Prashant K. Jain,et al. Role of build orientation in layered manufacturing: a review , 2013, Int. J. Manuf. Technol. Manag..
[57] R. Zengerle,et al. Osmotic micropumps for drug delivery. , 2012, Advanced drug delivery reviews.
[58] M. Sanopoulou,et al. Higuchi's equation and beyond: overview of the formulation and application of a generalized model of drug release from polymeric matrices. , 2012, International journal of pharmaceutics.
[59] Sabine Kempe,et al. In situ forming implants - an attractive formulation principle for parenteral depot formulations. , 2012, Journal of controlled release : official journal of the Controlled Release Society.
[60] Nicholas A Peppas,et al. Higuchi equation: derivation, applications, use and misuse. , 2011, International journal of pharmaceutics.
[61] Marius Bauer,et al. Polymers in Drug Delivery—State of the Art and Future Trends , 2011 .
[62] William B. Liechty,et al. Polymers for drug delivery systems. , 2010, Annual review of chemical and biomolecular engineering.
[63] S. Kukureka,et al. Swelling of medical grade silicones in liquids and calculation of their cross-link densities. , 2010, Medical engineering & physics.
[64] K. Bhise,et al. Biodegradable polymers: Which, when and why? , 2007 .
[65] T. Higuchi. MECHANISM OF SUSTAINED-ACTION MEDICATION. THEORETICAL ANALYSIS OF RATE OF RELEASE OF SOLID DRUGS DISPERSED IN SOLID MATRICES. , 1963, Journal of pharmaceutical sciences.