Tribology of Total Artificial Joints

The tribology of total artificial replacement joints is reviewed. The majority of prostheses currently implanted comprise a hard metallic component which articulates on ultra high molecular weight polyethylene surface. These relatively hard bearing surfaces operate with a mixed or boundary lubrication regime, which results in wear and wear debris from the ultra high molecular weight polyethylene surface. This debris can contribute to loosening and ultimate failure of the prostheses. The tribological performance of these joints has been considered and a number of factors which may contribute to increased wear rates have been identified. Cushion bearing surfaces consisting of low elastic modulus materials which can articulate with full fluid film lubrication are also described. These bearing surfaces have shown the potential for greatly reducing wear debris.

[1]  D. Dowson,et al.  Birefringent studies of polyethylene wear specimens and acetabular cups , 1991 .

[2]  M. Semlitsch,et al.  Reactions of the articular capsule to wear products of artificial joint prostheses. , 1977, Journal of biomedical materials research.

[3]  G. Higginson.  Elastohydrodynamic Lubrication in Human Joints , 1977 .

[4]  Ian Sherrington,et al.  Parameters for Characterizing the Surface Topography of Engineering Components , 1987 .

[5]  D. Howie,et al.  A rat model of resorption of bone at the cement-bone interface in the presence of polyethylene wear particles. , 1988, The Journal of bone and joint surgery. American volume.

[6]  H. Mckellop,et al.  In vivo wear of titanium-alloy hip prostheses. , 1990, The Journal of bone and joint surgery. American volume.

[7]  Duncan Dowson,et al.  The role of counterface imperfections in the wear of polyethylene , 1987 .

[8]  D. Dowson,et al.  The causes of femoral head roughening in explanted Charnley hip prostheses. , 1987, Engineering in medicine.

[9]  P S Walker,et al.  The Deformation and Wear of Plastic Components in Artificial Knee Joints — An Experimental Study: , 1981 .

[10]  H. McKellop.  Wear of Artificial Joint Materials II Twelve-Channel Wear-Screening Device: Correlation of Experimental and Clinical Results , 1981 .

[11]  B. Morrey,et al.  Effect of femoral head size on wear of the polyethylene acetabular component. , 1990, The Journal of bone and joint surgery. American volume.

[12]  D. Dowson,et al.  Ceramic bearing surfaces in total artificial joints: resistance to third body wear damage from bone cement particles. , 1991, Journal of medical engineering & technology.

[13]  D L Bartel,et al.  The effect of conformity and plastic thickness on contact stresses in metal-backed plastic implants. , 1985, Journal of biomechanical engineering.

[14]  E. B. Mathiesen,et al.  Tissue reactions to wear products from polyacetal (Delrin) and UHMW polyethylene in total hip replacement. , 1987, Journal of biomedical materials research.

[15]  A. Roquancourt,et al.  The use of dense alumina-alumina ceramic combination in total hip replacement. , 1988, Journal of biomedical materials research.

[16]  J P Paul,et al.  Heat transfer analysis of frictional heat dissipation during articulation of femoral implants. , 1988, Journal of biomedical materials research.

[17]  D. Dowson,et al.  The Wear of High Molecular Weight Polyethylene—Part II: The Effects of Reciprocating Motion, Orientation in the Polyethylene, and a Preliminary Study of the Wear of Polyethylene Against Itself , 1982 .

[18]  I. Clarke.  Wear of Artificial Joint Materials I Friction and Wear Studies: Validity of Wear-Screening Protocols , 1981 .

[19]  C. McCutchen,et al.  Mechanism of Animal Joints: Sponge-hydrostatic and Weeping Bearings , 1959, Nature.

[20]  Y. Ikada,et al.  Development of an artificial articular cartilage. , 1990, Clinical materials.

[21]  S. Simon,et al.  A method for the quantitative recovery of polyethylene wear debris from the simulated service of total joint prostheses , 1978 .

[22]  D. Dowson,et al.  Design Considerations for Cushion Form Bearings in Artificial Hip Joints , 1991, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[23]  S. Simon,et al.  Lubrication Mechanism of Hip Joint Replacement Prostheses , 1972 .

[24]  Duncan Dowson,et al.  Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints , 1985 .

[25]  Robert M. Rose,et al.  On the true wear rate of ultrahigh molecular weight polyethylene in the total knee prosthesis , 1984 .

[26]  R M Rose,et al.  A comparative study of total hip replacement prostheses. , 1973, Journal of biomechanics.

[27]  C. McCutchen.  Sponge-hydrostatic and weeping bearings. , 1959, Nature.

[28]  B. Weightman,et al.  The effect of the surface finish of alumina and stainless steel on the wear rate of UHMW polyethylene. , 1986, Biomaterials.

[29]  R. Rose,et al.  Wear of polyethylene in the total hip prosthesis. , 1982, Clinical orthopaedics and related research.

[30]  W. Rostoker.  The appearances of wear on polyethylene--a comparison of in vivo and in vitro wear surfaces. , 1978, Journal of biomedical materials research.

[31]  I. Paul,et al.  Wear mechanisms for ultrahigh molecular weight polyethylene in the total hip prosthesis , 1979 .

[32]  D Dowson,et al.  "Boosted lubrication" in synovial joints by fluid entrapment and enrichment. , 1968, Annals of the rheumatic diseases.

[33]  B. Wroblewski.  15–21‐year Results of the Charnley Low‐friction Arthroplasty , 1986, Clinical orthopaedics and related research.

[34]  R. Rose,et al.  Exploratory investigations on the structure dependence of the wear resistance of polyethylene , 1982 .

[35]  D. Dowson,et al.  The role of cement in the long term performance and premature failure of Charnley low friction arthroplasties. , 1986, Engineering in medicine.

[36]  Robert M. Rose,et al.  On the pressure dependence of the wear of ultrahigh molecular weight polyethylene , 1983 .

[37]  M Semlitsch,et al.  Twenty Years of Sulzer Experience with Artificial Hip Joint Materials , 1989, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[38]  T. Mittlmeier,et al.  Characterization of UHMWPE hip cups run on joint simulators. , 1987, Journal of biomedical materials research.

[39]  D. Dowson,et al.  An Experimental Study of Friction and Lubrication in Hip Prostheses , 1979 .

[40]  A. B. Strong,et al.  Hydrophilic Polyurethane Elastomers for Hemiarthroplasty: A Preliminary in Vitro Wear Study , 1980 .

[41]  A. Atkins,et al.  Wear of polymers , 1984 .

[42]  D. Smith,et al.  A new surface treatment for bonding. , 1979, Journal of biomedical materials research.

[43]  D. Dowson,et al.  Bio-Tribology of Natural and Replacement Synovial Joints , 1990 .

[44]  K. Markolf,et al.  Friction and wear properties of polymer, metal, and ceramic prosthetic joint materials evaluated on a multichannel screening device. , 1981, Journal of biomedical materials research.

[45]  I C Clarke,et al.  Wear characteristics of UHMW polyethylene: a method for accurately measuring extremely low wear rates. , 1978, Journal of biomedical materials research.

[46]  J. Charnley,et al.  Socket wear in Charnley low friction arthroplasty of the hip. , 1978, Clinical orthopaedics and related research.

[47]  D Dowson,et al.  Transient elastohydrodynamic lubrication models for the human ankle joint. , 1984, Engineering in medicine.

[48]  J. Charnley,et al.  The nine and ten year results of the low-friction arthroplasty of the hip. , 1973, Clinical orthopaedics and related research.

[49]  J. Charnley,et al.  Rate of wear in total hip replacement. , 1975, Clinical orthopaedics and related research.

[50]  P. Eyerer,et al.  An Evaluation of Retrieved UHMWPE Hip Joint Cups , 1988, Journal of biomaterials applications.

[51]  N. Eftekhar.  Long-term results of cemented total hip arthroplasty. , 1987, Clinical orthopaedics and related research.

[52]  D Dowson,et al.  Design and development of a versatile hip joint simulator and a preliminary assessment of wear and creep in Charnley total replacement hip joints. , 1988, Engineering in medicine.

[53]  D. Dowson,et al.  Influence of Counterface Topography on the Wear of Ultra High Molecular Weight Polyethylene Under Wet or Dry Conditions , 1985 .

[54]  J. Davidson,et al.  Wear, creep, and frictional heating of femoral implant articulating surfaces and the effect on long-term performance--Part II, Friction, heating, and torque. , 1988, Journal of biomedical materials research.

[55]  H. Mckellop,et al.  The wear behavior of ion-implanted Ti-6A1-4V against UHMW polyethylene. , 1990, Journal of biomedical materials research.

[56]  D. Bartel,et al.  The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. , 1986, The Journal of bone and joint surgery. American volume.

[57]  C. Kosack,et al.  LABORATORY , 1949, American journal of public health and the nation's health.

[58]  The Clinical Significance of Wear in Total Hip and Knee Prostheses , 1988, Journal of biomaterials applications.

[59]  D. Dowson,et al.  Micro-elastohydrodynamic lubrication of synovial joints. , 1986, Engineering in medicine.

[60]  R M Rose,et al.  On the true wear rate of ultra high-molecular-weight polyethylene in the total hip prosthesis. , 1980, The Journal of bone and joint surgery. American volume.

[61]  A. Unsworth,et al.  Frictional properties of artificial hip joints. , 1988, Engineering in Medicine.

[62]  J. Dally,et al.  Analysis of subsurface crack propagation and implications for wear of elastically deforming materials , 1990 .

[63]  P. D. Wilson,et al.  Metallic wear in failed titanium-alloy total hip replacements. A histological and quantitative analysis. , 1988, The Journal of bone and joint surgery. American volume.

[64]  D. Dowson,et al.  The Influence of Bone and Bone Cement Debris on Counterface Roughness in Sliding Wear Tests of Ultra-High Molecular Weight Polyethylene on Stainless Steel , 1990, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[65]  R. N. Stauffer,et al.  Charnley total hip arthroplasty with cement. Fifteen-year results. , 1989, The Journal of bone and joint surgery. American volume.

[66]  D Dowson,et al.  The characteristics of acetabular cups worn in the human body. , 1978, The Journal of bone and joint surgery. British volume.

[67]  H. Okumura.  Socket wear in total hip prosthesis with alumina ceramic head , 1989 .

[68]  J. Lancaster.  CHAPTER 14 – FRICTION AND WEAR , 1981 .

[69]  P. Eyerer,et al.  Property changes of UHMW polyethylene hip cup endoprostheses during implantation. , 1984, Journal of biomedical materials research.

[70]  P. Walker.  Friction of Internal Artificial Joints , 1972 .

[71]  O. Mahoney,et al.  Unsatisfactory results with a ceramic total hip prosthesis. , 1990, The Journal of bone and joint surgery. American volume.

[72]  I C Clarke,et al.  Wear of Artificial Joint Materials IV , 1981 .

[73]  Brian J. Briscoe,et al.  Wear of polymers: an essay on fundamental aspects , 1981 .

[74]  L. Riley,et al.  A histologic comparison of aseptic loosening of cemented, press-fit, and biologic ingrowth prostheses. , 1987, Clinical orthopaedics and related research.

[75]  J. K. Lancaster,et al.  MATERIAL-SPECIFIC WEAR MECHANISMS : RELEVANCE TO WEAR MODELLING , 1990 .

[76]  D. Dowson,et al.  Laboratory wear tests and clinical observations of the penetration of femoral heads into acetabular cups in total replacement hip joints: I: Charnley prostheses with polytetrafluoroethylene acetabular cups , 1985 .

[77]  A. Unsworth.  The effects of lubrication in hip joint prostheses. , 1978, Physics in medicine and biology.

[78]  D Dowson,et al.  Determination of Contact Area in ‘cushion Form’ Bearings for Artificial Hip Joints , 1990, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[79]  M Semlitsch,et al.  New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramin/metal. , 1977, Journal of biomedical materials research.

[80]  D. Dowson,et al.  The Wear of High Molecular Weight Polyethylene with Particular Reference to its Use in Artificial Human Joints , 1974 .

[81]  R. Buchanan,et al.  Ion implantation of surgical Ti-6Al-4V for improved resistance to wear-accelerated corrosion. , 1987, Journal of biomedical materials research.

[82]  D. Dowson,et al.  Penetration of Metallic Femoral Components into Polymeric Tibial Components Observed in a Knee Joint Simulator , 1985 .

[83]  J. Galante,et al.  Contact pressure dependence of wear rates of ultra high molecular weight polyethylene. , 1979, Journal of biomedical materials research.