Comparison of wavelength conversions based on cascaded second-harmonic generation/difference-frequency generation under continuous-wave and pulsed pumping

The implementation of wavelength conversion around 1.55 μm in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is mostly based on the cascaded second-harmonic generation/difference-frequency generation (SHG/DFG) process. As usual, a continuous wave (CW) and a pulsed wave are injected into a PPLN waveguide. Of them, the pulsed wave is regarded as the information carrier, and the CW is taken as the control. To transfer the information of optical codes from one wavelength to another, the codes can be applied to either the signal (CW-pumped scheme) or the pump (pulse-pumped scheme). In this work, the temporal and spectral properties of wavelength conversions during pulse propagation as well as the conversion efficiency in the two pumping schemes were compared experimentally and theoretically under different conditions of input pulse width, pump power and pump central wavelength. In the experiments, we adopted an MgO-doped PPLN waveguide, and a 40-GHz tunable picosecond-pulse source. The conversion characteristics were systematically investigated when the CW and the pulsed wave were alternatively taken as the pump at the quasi-phase-matching wavelength of the device. In the theory, we solved the coupled-mode equations and explained the physical insights for the numerical results and experimental observations. The conversion properties of the two pumping schemes were quantitatively compared. The simulated results agree well with the experimental data, and the obtained results provide some guidelines for the design and application of QPM waveguides in wavelength conversion.

[1]  Hiroshi Nishihara,et al.  Numerical analysis of ultra‐short pulse wavelength conversion characteristics of LiNbO3 waveguide nonlinear‐optic devices , 2003 .

[2]  S. Yoo.  Wavelength conversion technologies for WDM network applications , 1996 .

[3]  W. Sohler,et al.  Efficient cascaded difference frequency conversion in periodically poled Ti:LiNbO3 waveguides using pulsed and cw pumping , 2001 .

[4]  M. Levenson.  The principles of nonlinear optics , 1985, IEEE Journal of Quantum Electronics.

[5]  Yong Wang,et al.  Polarisation-insensitive QPM wavelength converter with out-of-band pump , 2004 .

[6]  M. Fujimura,et al.  Wavelength-conversion type picosecond optical switching using a waveguide QPM-SHG/DFG device , 2001 .

[7]  Yee Loy Lam,et al.  All-Optical Demultiplexing Using LiNbO_3 Quasiphase-Matched WaVelength Converters : Optics and Quantum Electronics , 2001 .

[8]  Yong Wang,et al.  Temperature Characteristics of 1.5-µm-Band MgO Doped LiNbO3 Quasi-Phase Matched Wavelength Converters , 2001 .

[9]  Hideaki Okayama,et al.  1.5 μm band efficient broadband wavelength conversion by difference frequency generation in a periodically domain‐inverted LiNbO3 channel waveguide , 1993 .

[10]  Ilaria Cristiani,et al.  Wavelength conversion and pulse reshaping through cascaded interactions in an MZI configuration , 2003 .

[11]  Xiaoyi Bao,et al.  Computer-controlled harmonic FM mode-locking of 40-GHz repetition-rate fiber laser , 2004, Photonics North.

[12]  Gaetano Assanto,et al.  Analysis of lithium niobate all-optical wavelength shifters for the third spectral window , 1999 .