A four-channel shaping amplifier for high resolution spectroscopy has been designed and realized in 0.8 /spl mu/m BiCMOS technology to process the signals coming from a new state of the art silicon drift detector composed by four elements. The 5th-order semi-Gaussian shaping function is obtained by means of a novel current mode topology based on current mirrors to amplify the time constants and on a current feedback technique to obtain complex conjugate poles. The proposed shaper allows the user to choose among four possible gains and two possible shaping-times. The slow shaping time (500 ns) is for best energy resolution measurements while the short one (167 ns) allows high rate measurements. The maximum dynamics for the input signal, coming from any kind of preamplifier, is 400 mV. The output signal can be taken both as a voltage and as a current. We have provided each channel with both a voltage-mode and a current-mode peak stretcher. The four stretched current outputs can be multiplexed on-chip to a single output pin. The noise performances are fully comparable with commercial instruments and the measured linearity is below /spl plusmn/0.5%.
[2]
M. W. Kruiskamp,et al.
A CMOS peak detect sample and hold circuit
,
1994
.
[3]
S. Buzzetti,et al.
XRF spectrometers based on monolithic arrays of silicon drift detectors: elemental mapping analyses and advanced detector structures
,
2006,
IEEE Transactions on Nuclear Science.
[4]
Heike Soltau,et al.
Silicon drift detectors for high resolution room temperature X-ray spectroscopy
,
1996
.
[5]
Kari Halonen,et al.
Low voltage MOS-transistor-only precision current peak detector with signal independent discharge time constant
,
1997,
Proceedings of 1997 IEEE International Symposium on Circuits and Systems. Circuits and Systems in the Information Age ISCAS '97.
[6]
P. F. Manfredi,et al.
Processing the signals from solid-state detectors in elementary-particle physics
,
1986
.