Electrochemical determination of L-phenylalanine at polyaniline modified carbon electrode based on β-cyclodextrin incorporated carbon nanotube composite material and imprinted sol-gel film.

A sensitive and selective electrochemical sensor based on a polyaniline modified carbon electrode for the determination of L-phenylalanine has been proposed by utilizing β-cyclodextrin (β-CD) incorporated multi-walled carbon nanotube (MWNT) and imprinted sol-gel film. The electrochemical behavior of the sensor towards L-phenylalanine was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometric i-t curve. The surface morphologies of layer-by-layer assembly electrodes were displayed by scanning electron microscope (SEM). The response mechanism of the imprinted sensor for L-phenylalanine was based on the inclusion interaction of β-CD and molecular recognition capacity of the imprinted film for L-phenylalanine. A linear calibration plot was obtained covering the concentration range from 5.0 × 10(-7) to 1.0 × 10(-4) mol L(-1) with a detection limit of 1.0 × 10(-9) mol L(-1). With excellent sensitivity, selectivity, stability, reproducibility and recovery, the electrochemical imprinted sensor was used to detect L-phenylalanine in blood plasma samples successfully.

[1]  Parviz Norouzi,et al.  A new molecularly imprinted polymer (MIP)-based electrochemical sensor for monitoring 2,4,6-trinitrotoluene (TNT) in natural waters and soil samples. , 2010, Biosensors & bioelectronics.

[2]  P. Sharma,et al.  Development of a highly sensitive and selective hyphenated technique (molecularly imprinted micro-solid phase extraction fiber-molecularly imprinted polymer fiber sensor) for ultratrace analysis of folic acid. , 2010, Analytica chimica acta.

[3]  J. Coleman,et al.  Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites , 2006 .

[4]  Xiaole Chen,et al.  Ordered Electrochemically Active Films of Hemoglobin, Didodecyldimethylammonium Ions, and Clay , 1999 .

[5]  J. Rusling,et al.  PROTON-COUPLED ELECTRON TRANSFER FROM ELECTRODES TO MYOGLOBIN IN ORDERED BIOMEMBRANE-LIKE FILMS , 1997 .

[6]  Joseph Wang,et al.  Electrochemical detection of trace insulin at carbon-nanotube-modified electrodes , 2004 .

[7]  Hao Zhang,et al.  Influence of microstructure on the capacitive performance of polyaniline/carbon nanotube array composite electrodes , 2009 .

[8]  R. Kala,et al.  Ion imprinted polymer based sensor for monitoring toxic uranium in environmental samples. , 2007, Analytica chimica acta.

[9]  S. Chiang,et al.  Tetrahydrobiopterin-deficient hyperphenylalaninemia in the Chinese. , 2001, Clinica chimica acta; international journal of clinical chemistry.

[10]  C. Brinker.  Sol-gel science , 1990 .

[11]  S. Marx,et al.  Molecular imprinting in thin films of organic-inorganic hybrid sol-gel and acrylic polymers , 2001 .

[12]  Yadong Jiang,et al.  Fabrication of methane gas sensor by layer-by-layer self-assembly of polyaniline/PdO ultra thin films on quartz crystal microbalance , 2010 .

[13]  S. Piletsky,et al.  Catalytic molecularly imprinted polymer membranes: development of the biomimetic sensor for phenols detection. , 2010, Analytica chimica acta.

[14]  Haiyan Xiang,et al.  Electrochemical Sensor for trans‐Resveratrol Determination Based on Indium Tin Oxide Electrode Modified with Molecularly Imprinted Self‐Assembled Films , 2009 .

[15]  Xiao-li Xu,et al.  A novel molecularly imprinted sensor for selectively probing imipramine created on ITO electrodes modified by Au nanoparticles. , 2009, Talanta.

[16]  M. Ganjali,et al.  Molecularly imprinted polymer based potentiometric sensor for the determination of hydroxyzine in tablets and biological fluids. , 2008, Analytica chimica acta.

[17]  G. Shen,et al.  β-Cyclodextrin incorporated carbon nanotube-modified electrode as an electrochemical sensor for rutin , 2006 .

[18]  F. Simon,et al.  Growth of single wall carbon nanotubes from 13C isotope labelled organic solvents inside single wall carbon nanotube hosts , 2006, cond-mat/0603477.

[19]  Ying Xu,et al.  Electrochemical impedance detection of DNA hybridization based on the formation of M-DNA on polypyrrole/carbon nanotube modified electrode , 2004 .

[20]  Maedeh Akhoundian,et al.  A novel potentiometric sensor for promethazine based on a molecularly imprinted polymer (MIP): The role of MIP structure on the sensor performance , 2010 .

[21]  E. Laviron.  The use of linear potential sweep voltammetry and of a.c. voltammetry for the study of the surface electrochemical reaction of strongly adsorbed systems and of redox modified electrodes , 1979 .

[22]  S. Yao,et al.  Novel layer-by-layer assembly molecularly imprinted sol-gel sensor for selective recognition of clindamycin based on Au electrode decorated by multi-wall carbon nanotube. , 2010, Journal of colloid and interface science.

[23]  Ying Liu,et al.  Development and characterization of an amperometric sensor for triclosan detection based on electropolymerized molecularly imprinted polymer , 2009 .

[24]  Herbert Shea,et al.  Carbon nanotubes: nanomechanics, manipulation, and electronic devices , 1999 .

[25]  Daniel Mandler,et al.  Parathion Sensor Based on Molecularly Imprinted Sol−Gel Films , 2004 .

[26]  Jian Chen,et al.  Enhanced l-phenylalanine biosynthesis by co-expression of pheA(fbr) and aroF(wt). , 2010, Bioresource technology.

[27]  M. Wubbolts,et al.  Metabolic engineering for microbial production of aromatic amino acids and derived compounds. , 2001, Metabolic engineering.

[28]  M. Demos,et al.  Neonatal hyperphenylalaninemia, perinatal hemochromatosis, and renal tubulopathy: a unique patient or a novel metabolic disorder? , 2005, Molecular genetics and metabolism.

[29]  Joseph Wang,et al.  Carbon nanotube-modified glassy carbon electrode for adsorptive stripping voltammetric detection of ultratrace levels of 2,4,6-trinitrotoluene , 2004 .

[30]  Richard G Compton,et al.  Glucose biosensor prepared by glucose oxidase encapsulated sol-gel and carbon-nanotube-modified basal plane pyrolytic graphite electrode. , 2004, Analytical biochemistry.

[31]  M. F. Mousavi,et al.  Ion transport and degradation studies of a polyaniline-modified electrode using SECM , 2009 .

[32]  Jingjing Xu,et al.  Layer-by-layer assembly of polyaniline nanofibers/poly(acrylic acid) multilayer film and electrochemical sensing , 2009 .

[33]  Pulickel M. Ajayan,et al.  Fast Electron Transfer Kinetics on Multiwalled Carbon Nanotube Microbundle Electrodes , 2001 .

[34]  N. Salahuddin,et al.  Phosphoric acid and pH sensors based on polyaniline films , 2010 .

[35]  M. Ganjali,et al.  A novel high selective and sensitive para-nitrophenol voltammetric sensor, based on a molecularly imprinted polymer-carbon paste electrode. , 2009, Talanta.

[36]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[37]  L. Mao,et al.  Novel electrochemical method for sensitive determination of homocysteine with carbon nanotube-based electrodes. , 2004, Biosensors & bioelectronics.

[38]  D. Bégué,et al.  Conducting polyaniline composite: From syntheses in waterborne systems to chemical sensor devices , 2010 .

[39]  J. Guerrero,et al.  Mitochondrial damage induced by fetal hyperphenylalaninemia in the rat brain and liver: Its prevention by melatonin, Vitamin E, and Vitamin C , 2006, Neuroscience Letters.

[40]  H. S. Kim,et al.  Functionalization of a poly(amidoamine) dendrimer with ferrocenyls and its application to the construction of a reagentless enzyme electrode. , 2000, Analytical chemistry.

[41]  Nuo-Wei Zhang,et al.  Molecularly Imprinted Membrane-Based Sensor for the Detection of Chloramphenicol Succinate Residue in Milk , 2008 .