Hydrostatic vs. hydrodynamic components of fluid pressure in the tribological interfaces of axial piston machines

[1]  Lizhi Shang,et al.  Virtual Assessment and Experimental Validation of Power Loss Contributions in Swash Plate Type Axial Piston Pumps , 2019, Energies.

[2]  A. Schenk,et al.  A Transient Thermoelastohydrodynamic Lubrication Model for the Slipper/Swashplate in Axial Piston Machines , 2015 .

[3]  Sujan Dhar,et al.  A Novel Fluid Structure Interaction-EHD Model and Optimization Procedure for an Asymmetrical Axially Balanced External Gear Machine , 2015 .

[4]  Lizhi Shang,et al.  Port and case flow temperature prediction for axial piston machines , 2015 .

[5]  Monika Ivantysynova,et al.  The effect of cross porting on derived displacement volume , 2014 .

[6]  Monika Ivantysynova,et al.  The Impact of Axial Piston Machines Mechanical Parts Constraint Conditions on The Thermo-Elastohydrodynamic Lubrication Analysis of The Fluid Film Interfaces , 2013 .

[7]  Monika Ivantysynova,et al.  Heat Transfer and Thermal Elastic Deformation Analysis on the Piston/Cylinder Interface of Axial Piston Machines , 2012 .

[8]  Sujan Dhar,et al.  A novel CFD - Axial motion coupled model for the axial balance of lateral bushings in external gear machines , 2012, Simul. Model. Pract. Theory.

[9]  J. Watton,et al.  The hydrostatic/hydrodynamic behaviour of an axial piston pump slipper with multiple lands , 2010 .

[10]  John Watton,et al.  Fundamentals of Fluid Power Control: Contents , 2009 .

[11]  C. J. Hooke,et al.  Investigation into the effects of orifice size, offset and overclamp ratio on the lubrication of slipper bearings , 1996 .

[12]  Y. P. Kakoullis,et al.  The Effects of Non-Flatness on the Performance of Slippers in Axial Piston Pumps , 1983 .

[13]  M. Ivantysynova,et al.  Thermodynamic Analysis on Compressible Viscous Flow and Numerical Modeling Study on Piston/Cylinder Interface in Axial Piston Machine , 2019, JFPS International Journal of Fluid Power System.

[14]  Tadeusz Zloto,et al.  Simulation of the Hydrostatic Load of the Valve Plate-cylinder Block System in an Axial Piston Pump , 2017 .

[15]  Marco Zecchi,et al.  A novel fluid structure interaction and thermal model to predict the cylinder block / valve plate interface performance in swash plate type axial piston machines , 2013 .

[16]  Andrew Schenk,et al.  AN INVESTIGATION OF THE IMPACT OF ELASTOHYDRODYNAMIC DEFORMATION ON POWER LOSS IN THE SLIPPER SWASHPLATE INTERFACE , 2011 .

[17]  B. Hamrock,et al.  Fundamentals of Fluid Film Lubrication , 1994 .