Towards a full two dimensional gas turbine performance simulator

Abstract In commercially available gas turbine performance simulation tools, individual engine components are typically represented with non-dimensional maps of experimental or default data. In those cases where actual component characteristics are not available and default characteristics are used instead, conventional tools can deviate substantially at off-design and transient conditions. Similarly, when real component characteristics are available, conventional engine cycle simulation tools can not predict the performance of the engine at other than nominal conditions satisfactorily, or account for the impact of changes in component geometry. This study looked into the full integration of two-dimensional streamline curvature component models with a low fidelity cycle program. Firstly, the obtained engine performance was compared against the one calculated based on default component characteristics. As a second case study, a range of flight Mach numbers and angles of attack were examined together with the effect of three different intake lip geometries on the performance of a notional, two-spool, low-bypass ratio, military engine. Two-dimensional models were used in the engine cycle analysis to provide a more accurate, physics- and geometry-based estimate of intake and fan performances. The analysis carried out by this study demonstrated relative changes in the predicted engine performance larger than 1%. For briefness, representative results are presented and discussed in this paper for one flight Mach number and angle of attack setting. More importantly, this research effort established the necessary methodology and technology required towards a full, two-dimensional engine cycle analysis at an affordable computational resource in the very short term.

[1]  D. C. Urasek,et al.  Performance of two-stage fan having low-aspect-ratio first-stage rotor blading , 1979 .

[2]  Pericles Pilidis,et al.  Prediction of Engine Performance Under Compressor Inlet Flow Distortion Using Streamline Curvature , 2007 .

[3]  John A. Reed,et al.  Development of an interactive graphical propulsion system simulator , 1994 .

[4]  Anestis I. Kalfas,et al.  A Partially Integrated Approach to Component Zooming Using Computational Fluid Dynamics , 2005 .

[5]  Pericles Pilidis,et al.  Advanced Performance Simulation of a Turbofan Engine Intake , 2006 .

[6]  R. A. Novak.  Streamline Curvature Computing Procedures for Fluid-Flow Problems , 1967 .

[7]  Juan J. Alonso,et al.  Unsteady CFD Simulation of an Entire Gas Turbine High-Spool , 2006 .

[8]  L. H. Smith.  NASA/GE Fan and Compressor Research Accomplishments , 1993 .

[9]  John A. Reed,et al.  An interactive graphical system for engine component zooming in a numerical propulsion system simulation , 1995 .

[10]  W. C. Moffatt,et al.  The Off-Design Analysis of Axial-Flow Compressors , 1967 .

[11]  R. S. Ruggeri,et al.  Performance with and without inlet radial distortion of a transonic fan stage designed for reduced loading in the tip region , 1978 .

[12]  Ian K. Jennions,et al.  A Quasi-Three-Dimensional Turbomachinery Blade Design System: Part II—Computerized System , 1985 .

[13]  John A. Reed,et al.  A Comparative Study of High and Low Fidelity Fan Models for Turbofan Engine System Simulation , 1991 .

[14]  J. Denton.  Throughflow Calculations for Transonic Axial Flow Turbines , 1978 .

[15]  Vassilios Pachidis.  Gas turbine advanced performance simulation , 2006 .

[16]  Anestis I. Kalfas,et al.  A Fully Integrated Approach to Component Zooming Using Computational Fluid Dynamics , 2006 .

[17]  Ian K. Jennions,et al.  The Importance of Circumferential Non-uniformities in a Passage-Averaged Quasi-Three-Dimensional Turbomachinery Design System , 1986 .

[18]  Pericles Pilidis,et al.  Development of a 2-D Compressor Streamline Curvature Code , 2006 .

[19]  Pericles Pilidis,et al.  A de-coupled approach to component high-fidelity analysis using computational fluid dynamics , 2007 .

[20]  L. H. Smith.  M. J. Hartmann Memorial Session Paper: NASA/GE Fan and Compressor Research Accomplishments , 1994 .