Efficient self-powered wearable electronic systems enabled by microwave processed thermoelectric materials

Abstract The integrated body sensor networks are expected to dominate the future of healthcare, making a critical paradigm shift that will support people in the comfort and security of their own homes. Thermoelectric generators, in this regard, can play a crucial role as they can steadily generate electricity from body heat and enable self-powered wearable or implantable medical, health, and sports devices. This work provides a comprehensive analysis of the operation and the optimization of wearable thermoelectric generators under different human body conditions. Thermoelectric design principles, wearable system considerations, and a novel method to synthesize the materials specially designed for body heat harvesting are presented. The limitations of the materials and systems for wearable applications are deliberated in detail, and the feasibility of eliminating the heatsink for enhancing body comfort is examined. N-type Bi2Te3-xSex was synthesized using a novel approach based on field-induced decrystallization by microwave radiation to achieve the optimum properties. This method resulted in amorphous-crystalline nanocomposites with simultaneously large thermopower and small thermal conductivity around the body temperature. Thermoelectric generators were fabricated from the optimized materials and packaged in flexible elastomers. The devices generated up to 150% higher voltage and 600% more power on the body compared to the commercial ones and, so far, are the best in class for body heat harvesting in wearable applications.

[1]  Yadong Jiang,et al.  An integrated flexible self-powered wearable respiration sensor , 2019, Nano Energy.

[2]  C. Tudor-Locke,et al.  How Many Steps/Day Are Enough? , 2004, Sports medicine.

[3]  M. Kanatzidis,et al.  High-performance bulk thermoelectrics with all-scale hierarchical architectures , 2012, Nature.

[4]  D. Vashaee,et al.  Enhanced thermoelectric performance in a metal/semiconductor nanocomposite of iron silicide/silicon germanium , 2016 .

[5]  Loreto Mateu,et al.  Review of energy harvesting techniques and applications for microelectronics (Keynote Address) , 2005, SPIE Microtechnologies.

[6]  Ove Jepsen,et al.  Electronic structure and thermoelectric properties of bismuth telluride and bismuth selenide , 1997 .

[7]  Erick O. Torres,et al.  Electrostatic Energy-Harvesting and Battery-Charging CMOS System Prototype , 2009, IEEE Transactions on Circuits and Systems I: Regular Papers.

[8]  Yadong Jiang,et al.  Self-powered room temperature NO2 detection driven by triboelectric nanogenerator under UV illumination , 2018 .

[9]  G. J. Snyder,et al.  Complex thermoelectric materials. , 2008, Nature materials.

[10]  Mehmet C. Öztürk,et al.  Review of wearable thermoelectric energy harvesting: From body temperature to electronic systems , 2020 .

[11]  R. Helbig,et al.  Halleffekt und anisotropie der beweglichkeit der elektronen in ZnO , 1974 .

[12]  Gang Chen,et al.  Studies on the Bi2Te3–Bi2Se3–Bi2S3 system for mid-temperature thermoelectric energy conversion , 2013 .

[13]  D. Vashaee,et al.  Effect of Microwave Processing and Glass Inclusions on Thermoelectric Properties of P-Type Bismuth Antimony Telluride Alloys for Wearable Applications , 2020 .

[14]  D. Vashaee,et al.  Phonon dynamics in type-VIII silicon clathrates: Beyond the rattler concept , 2017 .

[15]  G. R. Miller,et al.  Evidence for the existence of antistructure defects in bismuth telluride by density measurements , 1964 .

[16]  Melanie Swan,et al.  Sensor Mania! The Internet of Things, Wearable Computing, Objective Metrics, and the Quantified Self 2.0 , 2012, J. Sens. Actuator Networks.

[17]  Mani B. Srivastava,et al.  Power management in energy harvesting sensor networks , 2007, TECS.

[18]  Lei Yang,et al.  n-Type Bi2Te3-xSex Nanoplates with Enhanced Thermoelectric Efficiency Driven by Wide-Frequency Phonon Scatterings and Synergistic Carrier Scatterings. , 2016, ACS nano.

[19]  Elena Nicolescu Veety,et al.  Wearable thermoelectric generators for human body heat harvesting , 2016 .

[20]  John Michael Golio.  The RF and Microwave Hanbook , 2001 .

[21]  Xinbing Zhao,et al.  Improving thermoelectric properties of n-type bismuth–telluride-based alloys by deformation-induced lattice defects and texture enhancement , 2012 .

[22]  Susan Trolier-McKinstry,et al.  Efficient Energy Harvesting Using Piezoelectric Compliant Mechanisms: Theory and Experiment , 2016 .

[23]  D. Vashaee,et al.  Field induced decrystallization of silicon: Evidence of a microwave non-thermal effect , 2018 .

[24]  Han Li,et al.  Enhanced thermoelectric properties of Bi2(Te1−xSex)3-based compounds as n-type legs for low-temperature power generation , 2012 .

[25]  M. Dresselhaus,et al.  NANOCOMPOSITES TO ENHANCE ZT IN THERMOELECTRICS , 2007 .

[26]  D. Vashaee,et al.  Prediction of Giant Thermoelectric Power Factor in Type-VIII Clathrate Si46 , 2014, Scientific Reports.

[27]  Tiejun Zhu,et al.  Point Defect Engineering of High‐Performance Bismuth‐Telluride‐Based Thermoelectric Materials , 2014 .

[28]  Zhifeng Ren,et al.  Thermoelectric properties of n-type Bi2Te2.7Se0.3 with addition of nano-ZnO:Al particles , 2014 .

[29]  Yong Zhu,et al.  Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing , 2015, Proceedings of the IEEE.

[30]  D. Vashaee,et al.  Comparison of thermoelectric properties of nanostructured Mg2Si, FeSi2, SiGe, and nanocomposites of SiGe–Mg2Si, SiGe–FeSi2 , 2016 .

[31]  D. Vashaee,et al.  Thermoelectric generators for wearable body heat harvesting: Material and device concurrent optimization , 2020 .

[32]  Gang Chen,et al.  Bulk nanostructured thermoelectric materials: current research and future prospects , 2009 .

[33]  Qian Zhang,et al.  Thermoelectric Property Studies on Cu‐Doped n‐type CuxBi2Te2.7Se0.3 Nanocomposites , 2011 .

[34]  Adnan Harb,et al.  Energy harvesting: State-of-the-art , 2011 .

[35]  Xing Chen,et al.  A 6.45 $\mu{\rm W}$ Self-Powered SoC With Integrated Energy-Harvesting Power Management and ULP Asymmetric Radios for Portable Biomedical Systems , 2015, IEEE Transactions on Biomedical Circuits and Systems.

[36]  Amin Nozariasbmarz,et al.  N-Type Bismuth Telluride Nanocomposite Materials Optimization for Thermoelectric Generators in Wearable Applications , 2019, Materials.

[37]  D. Vashaee,et al.  Interfacial ponderomotive force in solids leads to field induced dissolution of materials and formation of non-equilibrium nanocomposites , 2019, Acta Materialia.

[38]  Debabrata Basu,et al.  Prospects of microwave processing: An overview , 2008 .

[39]  P. Pécheur,et al.  Tight-binding studies of crystal stability and defects in Bi2Te3 , 1994 .

[40]  M. Zebarjadi,et al.  Nanoscale solid-state cooling: a review , 2016, Reports on progress in physics. Physical Society.

[41]  L. Koudelka,et al.  Energy formation of antisite defects in doped Sb2Te3 and Bi2Te3 crystals , 1986 .

[42]  Ali Shakouri,et al.  Demonstration of electron filtering to increase the Seebeck coefficient in In0.53Ga0.47As/In0.53Ga0.28Al0.19As superlattices , 2006 .

[43]  David D. Wentzloff,et al.  A 10 mV-Input Boost Converter With Inductor Peak Current Control and Zero Detection for Thermoelectric and Solar Energy Harvesting With 220 mV Cold-Start and $-$14.5 dBm, 915 MHz RF Kick-Start , 2015, IEEE Journal of Solid-State Circuits.

[44]  W. Sutton,et al.  Microwave processing of ceramic materials , 1989 .

[45]  Kai Strunz,et al.  A 20 mV Input Boost Converter With Efficient Digital Control for Thermoelectric Energy Harvesting , 2010, IEEE Journal of Solid-State Circuits.

[46]  Mehmet C. Öztürk,et al.  Designing thermoelectric generators for self-powered wearable electronics , 2016 .

[47]  Antonio Iera,et al.  The Internet of Things: A survey , 2010, Comput. Networks.

[48]  Mildred S Dresselhaus,et al.  When thermoelectrics reached the nanoscale. , 2013, Nature nanotechnology.

[49]  Geng Yang,et al.  Wearable Internet of Things: Concept, architectural components and promises for person-centered healthcare , 2014 .

[50]  D. Vashaee,et al.  Detrimental influence of nanostructuring on the thermoelectric properties of magnesium silicide , 2012 .

[51]  W. S. Liu,et al.  Experimental studies on anisotropic thermoelectric properties and structures of n-type Bi2Te2.7Se0.3. , 2010, Nano letters.

[52]  G. J. Snyder,et al.  The Thermoelectric Properties of Bismuth Telluride , 2019, Advanced Electronic Materials.

[53]  G. Cho,et al.  A 40 mV Transformer-Reuse Self-Startup Boost Converter With MPPT Control for Thermoelectric Energy Harvesting , 2012, IEEE Journal of Solid-State Circuits.

[54]  D. Vashaee,et al.  Thermoelectric figure of merit of bulk FeSi2–Si0.8Ge0.2 nanocomposite and a comparison with β-FeSi2 , 2015 .

[55]  H. J. Goldsmid,et al.  Recent Studies of Bismuth Telluride and Its Alloys , 1961 .

[56]  D. Vashaee,et al.  Classification of Valleytronics in Thermoelectricity , 2016, Scientific Reports.

[57]  S. Trolier-McKinstry,et al.  A wrist-worn rotational energy harvester utilizing magnetically plucked {001} oriented bimorph PZT thin-film beams , 2017, 2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS).

[58]  M. Dresselhaus,et al.  High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys , 2008, Science.

[59]  D. Rowe.  CRC Handbook of Thermoelectrics , 1995 .

[60]  Nigel J Cronin,et al.  Microwave and Optical Waveguides , 1995 .

[61]  Ali Shakouri,et al.  Improved thermoelectric power factor in metal-based superlattices. , 2004, Physical review letters.

[62]  Amin Nozariasbmarz.  In-situ Sintering Decrystallization of Thermoelectric Materials using Microwave Radiation. , 2017 .