Study and modeling of energy performance of a hybrid photovoltaic/thermal solar collector: Configuration suitable for an indirect solar dryer

Abstract In this paper, a configuration of photovoltaic-thermal hybrid solar collector embeddable in an indirect solar dryer system is studied. In the present structure of the solar photovoltaic/thermal air collector, the air goes through a double pass below and above the photovoltaic module. A system of electrical and thermal balance equations is developed and analyzed governing various electric and heat transfer parameters in the solar hybrid air collector. The numerical model planned for this study gives a good precision of results, which are close to the experimental ones (of previous literature), and makes it possible to have a good assessment of energy performance regarding the studied configuration (temperature, electric and thermal powers, electrical and thermal efficiencies, etc.). The numerical results show the energy effectiveness of this hybrid collector configuration and particularly its interesting use in an indirect solar dryer system that provides a more suitable air temperature for drying agricultural products. The values of the electrical, thermal and overall energy efficiencies reaches 10.5%, 70% and 90% respectively, with a mass flow rate of 0.0155 kg/s and weather data sample for the month of June in the Algiers site. The results presented in this study also reveal how important the effect of certain parameters and operating conditions on the performance of the hybrid collector.

[1]  K. Touafek,et al.  Design and modeling of a photovoltaic thermal collector for domestic air heating and electricity production , 2013 .

[2]  J. C. Hollick Solar cogeneration panels , 1998 .

[3]  Saffa Riffat,et al.  Experimental investigation of a building integrated photovoltaic/thermal roof collector combined with a liquid desiccant enhanced indirect evaporative cooling system , 2015 .

[4]  Kamaruzzaman Sopian,et al.  Performance analysis of photovoltaic thermal air heaters , 1996 .

[5]  Robert W. Serth,et al.  Process Heat Transfer: Principles, Applications and Rules of Thumb , 2007 .

[6]  Said Farahat,et al.  An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector , 2010 .

[7]  Adel A. Hegazy,et al.  Comparative study of the performances of four photovoltaic/thermal solar air collectors. , 2000 .

[8]  Zhiqiang John Zhai,et al.  Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic–thermal collector system , 2010 .

[9]  William A. Beckman,et al.  Improvement and validation of a model for photovoltaic array performance , 2006 .

[10]  Ibrahim Dincer,et al.  Thermodynamic assessment of photovoltaic systems , 2009 .

[11]  Fang Tang,et al.  Comparative simulation analyses on dynamic performances of photovoltaic–thermal solar collectors with different configurations , 2014 .

[12]  Antonio Luque,et al.  Handbook of photovoltaic science and engineering , 2011 .

[13]  Tin-Tai Chow,et al.  An experimental study of façade-integrated photovoltaic/water-heating system , 2007 .

[14]  Said Farahat,et al.  Exergetic performance assessment of a solar photovoltaic thermal (PV/T) air collector , 2010 .

[15]  G. N. Tiwari,et al.  Overall energy, exergy and carbon credit analysis by different type of hybrid photovoltaic thermal air collectors , 2013 .

[16]  Karima E. Amori,et al.  Analysis of thermal and electrical performance of a hybrid (PV/T) air based solar collector for Iraq , 2012 .

[17]  Sujata Nayak,et al.  Energy and exergy analysis of photovoltaic/thermal integrated with a solar greenhouse , 2008 .

[18]  Palanichamy Gandhidasan,et al.  Comparative study of double-pass flat and compound parabolic concentrated photovoltaic–thermal systems with and without fins , 2015 .

[19]  H. P. Garg,et al.  Transient simulation of conventional hybrid photovoltaic/thermal (PV/T) air heating collectors , 1998 .

[20]  G. N. Tiwari,et al.  Optimizing the energy and exergy of building integrated photovoltaic thermal (BIPVT) systems under cold climatic conditions , 2010 .

[21]  D. P. Sekulic,et al.  Extended surface heat transfer , 1972 .

[22]  Abdelkader Chaker,et al.  Analysis and evaluation of the impact of climatic conditions on the photovoltaic modules performance in the desert environment , 2015 .

[23]  Kamaruzzaman Sopian,et al.  Performance analysis of photovoltaic thermal (PVT) water collectors , 2014 .

[24]  Sujata Nayak,et al.  Theoretical performance assessment of an integrated photovoltaic and earth air heat exchanger greenhouse using energy and exergy analysis methods , 2009 .

[25]  W. Swinbank Long‐wave radiation from clear skies , 1963 .

[26]  E. Skoplaki,et al.  ON THE TEMPERATURE DEPENDENCE OF PHOTOVOLTAIC MODULE ELECTRICAL PERFORMANCE: A REVIEW OF EFFICIENCY/ POWER CORRELATIONS , 2009 .

[27]  Arvind Tiwari,et al.  Performance evaluation of photovoltaic thermal solar air collector for composite climate of India , 2006 .

[28]  Clement Kleinstreuer,et al.  Concentration photovoltaic–thermal energy co-generation system using nanofluids for cooling and heating , 2014 .

[29]  Arvind Tiwari,et al.  Energy and exergy analysis of PV/T air collectors connected in series , 2009 .

[30]  D. L. Evans,et al.  Simplified method for predicting photovoltaic array output , 1980 .

[31]  Kamaruzzaman Sopian,et al.  Performance of a double pass photovoltaic thermal solar collector suitable for solar drying systems , 2000 .

[32]  K. Touafek,et al.  Experimental study on a new hybrid photovoltaic thermal collector , 2009 .

[33]  I. Dincer,et al.  Performance evaluation of a hybrid photovoltaic thermal (PV/T) (glass-to-glass) system , 2009 .

[34]  Alessandra Di Gangi,et al.  A procedure to calculate the five-parameter model of crystalline silicon photovoltaic modules on the basis of the tabular performance data , 2013 .

[35]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[36]  Ha Herbert Zondag,et al.  Flat-plate PV-Thermal collectors and systems : a review , 2008 .