CH₃NH₃PbI₃-based planar solar cells with magnetron-sputtered nickel oxide.

Herein we report an investigation of a CH3NH3PbI3 planar solar cell, showing significant power conversion efficiency (PCE) improvement from 4.88% to 6.13% by introducing a homogeneous and uniform NiO blocking interlayer fabricated with the reactive magnetron sputtering method. The sputtered NiO layer exhibits enhanced crystallization, high transmittance, and uniform surface morphology as well as a preferred in-plane orientation of the (200) plane. The PCE of the sputtered-NiO-based perovskite p-i-n planar solar cell can be further promoted to 9.83% when a homogeneous and dense perovskite layer is formed with solvent-engineering technology, showing an impressive open circuit voltage of 1.10 V. This is about 33% higher than that of devices using the conventional spray pyrolysis of NiO onto a transparent conducting glass. These results highlight the importance of a morphology- and crystallization-compatible interlayer toward a high-performance inverted perovskite planar solar cell.

[1]  Dieter Söll,et al.  Cover Picture: Recoding the Genetic Code with Selenocysteine (Angew. Chem. Int. Ed. 1/2014) , 2014 .

[2]  Qing Wang,et al.  Characteristics of p-NiO Thin Films Prepared by Spray Pyrolysis and Their Application in CdS-sensitized Photocathodes , 2011 .

[3]  Henry J Snaith,et al.  Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates , 2013, Nature Communications.

[4]  Jun Peng,et al.  Greatly Reduced Processing Temperature for a Solution‐Processed NiOx Buffer Layer in Polymer Solar Cells , 2013 .

[5]  Robert P. H. Chang,et al.  p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells , 2008, Proceedings of the National Academy of Sciences.

[6]  Jieshan Qiu,et al.  High performance hybrid solar cells sensitized by organolead halide perovskites , 2013 .

[7]  Yongfang Li,et al.  Enhanced performance and stability in PBDTTT-C-T : PC70 BM polymer solar cells by optimizing thickness of NiOx buffer layers , 2013 .

[8]  Zhenghong Lu,et al.  Effects of Processing Conditions on the Work Function and Energy-Level Alignment of NiO Thin Films , 2010 .

[9]  F. Huang,et al.  Superhard V-Si-N coatings (> 50 GPa) with the cell-like nanostructure prepared by magnetron sputtering , 2013 .

[10]  Leone Spiccia,et al.  A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. , 2014, Angewandte Chemie.

[11]  Leone Spiccia,et al.  Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells , 2014 .

[12]  S. Mori,et al.  Retardation of electron injection at NiO/dye/electrolyte interface by aluminium alkoxide treatment , 2010 .

[13]  Tzung-Fang Guo,et al.  CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells , 2013, Advanced materials.

[14]  Nripan Mathews,et al.  Advancements in perovskite solar cells: photophysics behind the photovoltaics , 2014 .

[15]  Juan Bisquert,et al.  Mechanism of carrier accumulation in perovskite thin-absorber solar cells , 2013, Nature Communications.

[16]  K. Cao,et al.  D–π–A structured porphyrins for efficient dye-sensitized solar cells , 2013 .

[17]  J. Noh,et al.  Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors , 2013, Nature Photonics.

[18]  Qi Chen,et al.  Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility. , 2014, ACS nano.

[19]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[20]  S. Hüfner,et al.  The electronic structure of NiO investigated by photoemission spectroscopy , 1991 .

[21]  John R. Reynolds,et al.  Solution‐Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells , 2013 .

[22]  Qingfeng Dong,et al.  Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers , 2014 .

[23]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[24]  Juan Bisquert,et al.  General working principles of CH3NH3PbX3 perovskite solar cells. , 2014, Nano letters.

[25]  Gregory C. Welch,et al.  Improvement of Interfacial Contacts for New Small‐Molecule Bulk‐Heterojunction Organic Photovoltaics , 2012, Advanced materials.

[26]  M. Grätzel,et al.  Title: Long-Range Balanced Electron and Hole Transport Lengths in Organic-Inorganic CH3NH3PbI3 , 2017 .

[27]  Sang Il Seok,et al.  Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. , 2014, Nature materials.

[28]  Peng Gao,et al.  Impedance spectroscopic analysis of lead iodide perovskite-sensitized solid-state solar cells. , 2014, ACS nano.

[29]  Yun-Chorng Chang,et al.  Nickel Oxide Electrode Interlayer in CH3NH3PbI3 Perovskite/PCBM Planar‐Heterojunction Hybrid Solar Cells , 2014, Advanced materials.

[30]  Juan Bisquert,et al.  General Working Principles of CH 3 NH 3 PbX 3 Perovskite Solar Cells , 2013 .

[31]  K. Cao,et al.  Lead methylammonium triiodide perovskite-based solar cells: an interfacial charge-transfer investigation. , 2014, ChemSusChem.

[32]  Laura M. Herz,et al.  Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber , 2013, Science.

[33]  Nam-Gyu Park,et al.  6.5% efficient perovskite quantum-dot-sensitized solar cell. , 2011, Nanoscale.

[34]  Nripan Mathews,et al.  The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells , 2014 .

[35]  K. Ogura,et al.  Semiconductor and electrochromic properties of electrochemically deposited nickel oxide films , 2004 .