On a Two Pole Motor for Electric Propulsion System

This thesis presents research regarding a full scale linear ferrite permanent magnet generator, installed in a wave energy conversion system. The ferrite based magnetic circuit, supplementing the previous utilized Nd2Fe14B-magnet design, is designed with an electromagnetic numerical simulation tool, where the model is derived from Maxwell’s equations. The full scale design is, known to the author, the first developed linear ferrite based machine. The material change in the magnetic circuit required different mechanical solutions of the generator. The fundamental, primary theory and reasoning behind the new mechanical design is here presented, where sustainability, economy and production have been in focus and affected the final design. Two versions of the generator have been assembled and deployed at the projects experimental site on the Swedish west coast, and three more are under construction, planned to be installed during the autumn of 2013. Further, the thesis presents an electric conversion circuit based on the electric resonance phenomena. Full scale experimental results present a successfully achieved electric resonance between the linear wave energy generator and external circuit.Finally, research regarding a two pole permanent magnet motor for an electrical vehicle is presented. Detailed analytical and numerical calculations are utilized to investigate the losses in the machine over a wide frequency interval. The results indicate the possibility of an increased efficiency of electrical motors in electrical vehicle system and argue for elimination of the gearbox. The system total efficiency and mechanical stability can thereby be increased. The work concerning the wave energy converter is a part of a larger project, the Lysekil Wave Power Project, developed by a research group at Uppsala University, whereas the work concerning the electric motor so far has been carried out as an individual project. However, a future goal is to integrate the research on the electric motor for electric vehicles with ongoing research regarding a flywheel based electric driveline for an All Electric Propulsion System.

[1]  John G W West,et al.  DC, induction, reluctance and PM motors for electric vehicles , 1994 .

[2]  A. Broddefalk,et al.  Dependence of the power losses of a non-oriented 3% Si-steel on frequency and gauge , 2006 .

[3]  R. L. Stoll The analysis of eddy currents , 1974 .

[4]  Kay Hameyer,et al.  Study and comparison of several permanent-magnet excited rotor types regarding their applicability in electric vehicles , 2010, 2010 Emobility - Electrical Power Train.

[5]  Roydon Andrew Fraser,et al.  Implementation of a fuel cell plug‐in hybrid electric vehicle and factors affecting transportation policy , 2011 .

[6]  Hans Bernhoff,et al.  Simulations and experiments on a 12 kW direct driven PM synchronous generator for wind power , 2008 .

[7]  Hans Bernhoff,et al.  Design Parameters Calculation of a Novel Driveline for Electric Vehicles , 2009 .

[8]  R. L. Stoll,et al.  Comparison between analytical and numerical methods of calculating tooth ripple losses in salient pole synchronous machines , 2001 .

[9]  W. J. Gibbs,et al.  Tooth-ripple losses in unwound pole-shoes , 1947 .

[10]  Shuanghong Wang,et al.  Implementation of a 50-kW four-phase switched reluctance motor drive system for hybrid electric vehicle , 2005 .

[11]  Hans Bernhoff,et al.  A 225 kW Direct Driven PM Generator Adapted to a Vertical Axis Wind Turbine , 2011 .

[12]  M. Leijon,et al.  Poynting Theorem Applied to Cable Wound Generators , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  Srdjan Lukic,et al.  Modeling of electric machines for automotive applications using efficiency maps , 2003, Proceedings: Electrical Insulation Conference and Electrical Manufacturing and Coil Winding Technology Conference (Cat. No.03CH37480).

[14]  Demba Diallo,et al.  Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study , 2005, IEEE Transactions on Vehicular Technology.

[15]  Alberto Tenconi,et al.  Improved design for electric vehicle induction motors using an optimisation procedure , 1996 .

[16]  Pil-Wan Han,et al.  Design of High Power Permanent Magnet Motor With Segment Rectangular Copper Wire and Closed Slot Opening on Electric Vehicles* , 2010, IEEE Transactions on Magnetics.

[17]  C. C. Chan,et al.  The state of the art of electric and hybrid vehicles , 2002, Proc. IEEE.

[18]  Hans Bernhoff,et al.  FEM Simulations and Experiments of Different Loading Conditions for a 12 kW Direct Driven PM Synchronous Generator for Wind Power , 2009 .

[19]  Mats Leijon,et al.  A recent development in the electrical insulation systems of generators and transformers , 2001 .

[20]  Shuanghong Wang,et al.  Implementation of a 50-kW four-phase switched reluctance motor drive system for hybrid electric vehicle , 2005, IEEE Transactions on Magnetics.

[21]  M. Ehsani,et al.  Advantages of switched reluctance motor applications to EV and HEV: design and control issues , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[22]  Mats Leijon,et al.  A Wide-Band Lumped Circuit Model of Eddy Current Losses in a Coil with a Coaxial Insulation System and a Stranded Conductor , 2004, IEEE Power Engineering Review.

[23]  M. Leijon,et al.  Multiphysics simulation of wave energy to electric energy conversion by permanent magnet linear generator , 2005, IEEE Transactions on Energy Conversion.

[24]  Fredrik Bülow Extreme Load Conditions for Wind Powered Direct Drive PM Generators , 2011 .

[25]  R. Bonert,et al.  Minimization of iron losses of permanent magnet synchronous machines , 2005, IEEE Transactions on Energy Conversion.