Kinematics simulation of the anthropomorphic manipulator based on Pro/E and ADAMS

A kinematics simulation for the anthropomorphic manipulator is completed in the paper based on Pro/E and the automatic dynamic analysis of mechanical systems (ADAMS). First Pro/E software (Pro-Engineer) is used to establish 3d entity model of the anthropomorphic manipulator. Then the 3d entity model is imported into the automatic dynamic analysis of mechanical systems. Thirdly the kinematics simulation analysis of anthropomorphic manipulator is carried out, which provides the position, velocity, acceleration curves of anthropomorphic manipulator finger joints. This is a method to clarify the effectiveness of the design for anthropomorphic manipulator.

[1]  Yifan Chen,et al.  Optimal spray gun trajectory planning with variational distribution for forming process , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[2]  Rui Zhang,et al.  Finite Element Analysis Based on ProE, HyperMesh and ANSYS , 2008, 2008 International Conference on Computer Science and Software Engineering.

[3]  Yubin Liu,et al.  Calibration of a 6-PRRS parallel manipulator using D-H method combined with vector chain , 2009, 2009 International Conference on Mechatronics and Automation.

[4]  Qitao Huang,et al.  Model-based Control for 6-DOF Parallel Manipulator , 2009, 2009 International Asia Conference on Informatics in Control, Automation and Robotics.

[5]  Liu Fang,et al.  Intelligent Design Approach for Vacuum Suction Cup Units in Aircraft Flexible Assembly , 2009, 2009 International Forum on Computer Science-Technology and Applications.

[6]  Y. Fei,et al.  Kinematics analysis of morphing process in multi-module robot systems , 2010, 2010 8th World Congress on Intelligent Control and Automation.

[7]  Anatoly Pashkevich,et al.  Design of experiments for calibration of planar anthropomorphic manipulators , 2011, 2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

[8]  Hongbin Liu,et al.  Design and kinematic simulation of ratchet mechanism based on ADAMS , 2011, 2011 International Conference on Mechatronic Science, Electric Engineering and Computer (MEC).

[9]  Yoon-Gu Kim,et al.  Structural analysis of built-in sensor frame in jaws with linear type gripper , 2012, 2012 IEEE International Conference on Automation Science and Engineering (CASE).