Design and analysis of an integrated driver for piezoelectric actuators

Small-scale, highly maneuverable, flapping-wing robotic insects have a wide range of applications, including exploration, environmental monitoring, search and rescue, and surveillance. For these small-scale robots, a piezoelectric cantilever actuator driven by a high voltage drive signal is a preferred actuation mechanism. The generation of this drive signal via light and efficient power electronics is critical given the limited weight budget for the flapping-wing robot. Previous work demonstrated actuator drive circuitry using discrete power transistors and passive elements. This paper presents a new design that integrates all the power FETs into a single monolithic IC, reducing the weight of the power electronics to fit within the weight budget. This design adds the capability of driving multiple outputs to accommodate recent electromechanical design advances for flying robots.

[1]  Yuan-Ping Liu,et al.  Small power step-up converter for driving flapping wings of the micro robotic insects , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[2]  Robert J. Wood,et al.  Design, fabrication, and modeling of the split actuator microrobotic bee , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[3]  Robert J. Wood,et al.  Sensors and Actuators A: Physical , 2009 .

[4]  Robert J. Wood,et al.  Milligram-scale high-voltage power electronics for piezoelectric microrobots , 2009, 2009 IEEE International Conference on Robotics and Automation.

[5]  D. Campolo,et al.  Efficient charge recovery method for driving piezoelectric actuators with quasi-square waves , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  Kevin C. Galloway,et al.  First controlled vertical flight of a biologically inspired microrobot , 2011, Bioinspiration & biomimetics.

[7]  Robert J. Wood,et al.  System identification and linear time-invariant modeling of an insect-sized flapping-wing micro air vehicle , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  B. Edamana,et al.  Optimal Low-Power Piezoelectric Actuator Control With Charge Recovery for a Microrobotic Leg , 2013, IEEE/ASME Transactions on Mechatronics.

[9]  Suat U. Ay,et al.  Supply boosting technique for designing very low-voltage mixed-signal circuits in standard CMOS , 2010, 2010 53rd IEEE International Midwest Symposium on Circuits and Systems.

[10]  M. Puig-Vidal,et al.  Smart Power Integrated Circuit for a Piezoelectric Miniature Robot , 2002 .

[11]  L. Fontanella,et al.  Single chip, self supplied, voltage and charge mode double 80V piezoelectric actuator driver , 1999, Proceedings of the 25th European Solid-State Circuits Conference.

[12]  Yvon Savaria,et al.  High Voltage Interfaces for CMOS/DMOS Technologies , 2003 .

[13]  Robert J. Wood,et al.  Energetics of flapping-wing robotic insects: towards autonomous hovering flight , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.