Calibrated Frequency-Division Distorted Born Iterative Tomography for Real-Life Head Imaging

The clinical use of microwave tomography (MT) requires addressing the significant mismatch between simulated environment, which is used in the forward solver, and real-life system. To alleviate this mismatch, a calibrated tomography, which uses two homogeneous calibration phantoms and a modified distorted Born iterative method (DBIM), is presented. The two phantoms are used to derive a linear model that matches the forward solver to real-life measurements. Moreover, experimental observations indicate that signal quality at different frequencies varies between different antennas due to inevitably inconsistent manufacturing tolerance and variances in radio-frequency chains. An optimum frequency, at which the simulated and measured signals of the antenna present maximum similarity when irradiating the calibrated phantoms, is thus calculated for each antenna. A frequency-division DBIM (FD-DBIM), in which different antennas in the array transmit their corresponding optimum frequencies, is subsequently developed. A clinical brain scanner is then used to assess performance of the algorithm in lab and healthy volunteers’ tests. The linear calibration model is first used to calibrate the measured data. After that FD-DBIM is used to solve the problem and map the dielectric properties of the imaged domain. The simulated and experimental results confirm validity of the presented approach and its superiority to other tomographic method.