Spatial characterization of joint planes and stability analysis of tunnel blocks

Abstract It has been gaining credence over the past several decades that the spatial characteristics of rock joints exert detrimental effect on the stability of tunnel structures. The deterministic joint spatial distribution around the tunnel was defined by digital photogrammetry technique, which statistically provides the basis for performing Monte-Carlo simulation of stochastic joints that are hidden inside the surrounding rock. The blocks generated by the intersection between structural planes and excavation surfaces were analyzed based on the block theory and limit equilibrium. The keyblocks were identified and the corresponding factors of safety were determined. All these analysis procedures were codified into the computer program GeoSMA-3D (Geotechnical Structure and Model Analysis). The developed software satisfied the fast analysis requirements of joint plane simulation, spatial block modelling, keyblock identification and failure process illustration. The case study was performed with reference to Dabeigou Tunnel on Duolun Second-class Highway in Duolun Town, Nei Mongol, China. Failure process illustration would be useful to facilitate the practical engineers to understand the basic mechanism and select the strengthening strategies.

[1]  Shuhong Wang,et al.  APPLICATION OF BLOCK THEORY MODELING ON SPATIAL BLOCK TOPOLOGICAL IDENTIFICATION TO ROCK SLOPE STABILITY ANALYSIS , 2014 .

[2]  P. K. Kaiser,et al.  Progressive spalling in massive brittle rock , 2000 .

[3]  Zhongkui Li,et al.  Stability analysis of block in the surrounding rock mass of a large underground excavation , 2004 .

[4]  R. Goodman.  Introduction to Rock Mechanics , 1980 .

[5]  Alexander Shapiro,et al.  Statistical analysis of jointed rock data , 1991 .

[6]  P. Warburton.  Vector stability analysis of an arbitrary polyhedral rock block with any number of free faces , 1981 .

[7]  Richard E. Goodman,et al.  Predicting the Number of dimensions of Key Blocks of an Excavation Using Block Theory and Joint Statistics , 1987 .

[8]  Jae-Joon Song,et al.  Stability analysis of rock blocks around a tunnel using a statistical joint modeling technique , 2001 .

[9]  Pinnaduwa Kulatilake.  State-of-the-art in stochastic joint geometry modeling , 1988 .

[10]  T. F. Cho,et al.  Three-dimensional deterministic block analysis model for information-oriented excavation design , 2012 .

[11]  C. A. Tang,et al.  Numerical study on failure mechanism of tunnel in jointed rock mass , 2008 .

[13]  Richard E. Goodman,et al.  Block theory and its application to rock engineering , 1985 .

[14]  Karen C. Chou,et al.  Limit analysis of 2-d tunnel keyblocks , 1997 .

[15]  Sanghyun Ahn,et al.  Removability anaysis of rock blocks by block theory and a probabilistic approach , 2004 .

[16]  C. Tang,et al.  Numerical simulation of progressive rock failure and associated seismicity , 1997 .

[17]  In Mo Lee,et al.  Stability analysis of tunnel keyblock: a case study , 2000 .

[18]  Bernard Amadei,et al.  Extensions of discontinuous deformation analysis for jointed rock masses , 1996 .

[19]  Z. T. Bieniawski,et al.  Engineering classification of jointed rock masses , 1973 .

[20]  Nick Barton,et al.  Engineering classification of rock masses for the design of tunnel support , 1974 .

[21]  Nicholas Anthony Lanney,et al.  Statistical description of rock properties and sampling. , 1978 .

[22]  C. González-Nicieza,et al.  Analysis of tetrahedral and pentahedral key blocks in underground excavations , 2009 .

[23]  C. González-Nicieza,et al.  Identification of non-pyramidal key blocks in jointed rock masses for tunnel excavation , 2005 .