UNDERSTANDING VOIDS IN THE WORKSPACE OF SERIAL ROBOT MANIPULATORS

Analytical methods for identifying the boundary to the workspace of mechanical manipulators and the boundary to voids in the workspace are presented. The determination of parametric equations of surface patches that envelop the workspace of serial manipulators was presented elsewhere and is extended in this paper to an analytical method for void identification. Because of the ability to identify closed-form surface patches that exist internal and external to the workspace, a mathematical formulation based on the concept of a normal acceleration function is introduced. Admissible motion in the normal direction to a point on a singular surface is delineated and characterized by definiteness properties of a quadratic form. An enclosure bound by surface patches that do not admit normal motion towards its internal is identified as a void. Several examples are treated using this formulation to illustrate the method.

[1]  Dinesh K. Pai,et al.  Genericity and singularities of robot manipulators , 1992, IEEE Trans. Robotics Autom..

[2]  Edward J. Haug,et al.  On the determination of boundaries to manipulator workspaces , 1997 .

[3]  F. A. Adkins,et al.  Numerical Algorithms for Mapping Boundaries of Manipulator Workspaces , 1996 .

[4]  Shih-Liang Wang,et al.  A Study of the Singular Configurations of Serial Manipulators , 1987 .

[5]  C. S. G. Lee,et al.  Robotics: Control, Sensing, Vision, and Intelligence , 1987 .

[6]  K. Abdel-Malek.  SERIAL 5 DOF MANIPULATORS : WORKSPACE , VOID , AND VOLUME DETERMINATION , 1999 .

[7]  Karim Abdel-Malek,et al.  Path trajectory verification for robot manipulators in a manufacturing environment , 1997 .

[8]  Marcelo H. Ang,et al.  Identification and Analysis of Robot Manipulator Singularities , 1992 .

[9]  C. Innocenti,et al.  Singularities, Configurations, and Displacement Functions for Manipulators , 1986 .

[10]  J. Spanos,et al.  Workspace Analysis of Regional Structures of Manipulators , 1985 .

[11]  Daniel C. H. Yang,et al.  A New Method for the Singularity Analysis of Simple Six-link Manipulators , 1986 .

[12]  D. Kohli,et al.  Boundary Surfaces, Limit Surfaces, Crossable and Noncrossable Surfaces in Workspace of Mechanical Manipulators , 1988 .

[13]  K. Waldron,et al.  A Study of the Jacobian Matrix of Serial Manipulators , 1985 .

[14]  Joseph Duffy,et al.  Hypersurfaces of special configurations of serial manipulators and related concepts. part II: Passive joints, configurations, component manifolds and some applications , 1988, J. Field Robotics.

[15]  T. Shamir,et al.  The Singularities of Redundant Robot Arms , 1990, Int. J. Robotics Res..

[16]  Shaheen Ahmad,et al.  Analysis of kinematic singularities for robot manipulators in Cartesian coordinate parameters , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[17]  Marco Ceccarelli,et al.  On the Workspace of General 4R Manipulators , 1995, Int. J. Robotics Res..

[18]  J. Denavit,et al.  A kinematic notation for lower pair mechanisms based on matrices , 1955 .

[19]  Fujio Yamaguchi,et al.  Curves and Surfaces in Computer Aided Geometric Design , 1988, Springer Berlin Heidelberg.

[20]  Marco Ceccarelli,et al.  A Synthesis Algorithm for Three-Revolute Manipulators by Using an Algebraic Formulation of Workspace Boundary , 1995 .

[21]  P. Zsombor-Murray,et al.  Singularity analysis of planar parallel manipulators , 1995 .

[22]  Carlos Canudas de Wit,et al.  Controllability issues of robots in singular configurations , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[23]  Christine Chevallereau.  Feasible trajectories for a non-redundant robot at a singularity , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[24]  Jean-Pierre Merlet,et al.  Singular Configurations of Parallel Manipulators and Grassmann Geometry , 1988, Int. J. Robotics Res..

[25]  Eugene L. Allgower,et al.  Numerical continuation methods - an introduction , 1990, Springer series in computational mathematics.

[26]  Faydor L. Litvin,et al.  Singularities in Motion and Displacement Functions of Spatial Linkages , 1986 .

[27]  Joseph Duffy,et al.  Special configurations of spatial mechanisms and robot arms , 1982 .

[28]  Edward J. Haug,et al.  ANALYSIS OF BARRIERS TO CONTROL OF MANIPULATORS WITHIN ACCESSIBLE OUTPUT SETS , 1995 .

[29]  H. Lipkin,et al.  Enumeration of Singular Configurations for Robotic Manipulators , 1991 .