Design criteria for improving insulation effectiveness of multilayer walls
暂无分享,去创建一个
Claudia Guattari | Francesco Asdrubali | Paola Gori | Luca Evangelisti | F. Asdrubali | C. Guattari | L. Evangelisti | P. Gori
[1] C. Guattari,et al. Accuracy of lumped-parameter representations for heat conduction modeling in multilayer slabs , 2015 .
[2] Kuo-Chi Liu,et al. Thermal propagation analysis for living tissue with surface heating , 2008 .
[3] F. Asdrubali,et al. A review of unconventional sustainable building insulation materials , 2015 .
[4] William W. Clark,et al. Configuring wall layers for improved insulation performance , 2013 .
[5] Kai Li,et al. Synergic relationships between thermophysical properties of wall materials in energy-saving building design , 2015 .
[6] M. Ferraiuolo,et al. Heat transfer in a multi-layered thermal protection system under aerodynamic heating , 2012 .
[7] Luca Evangelisti,et al. Influence of the Thermal Inertia in the European Simplified Procedures for the Assessment of Buildings’ Energy Performance , 2014 .
[8] Jan Kosny,et al. Influence of insulation configuration on heating and cooling loads in a continuously used building , 2002 .
[9] Kevin J. Kircher,et al. On the lumped capacitance approximation accuracy in RC network building models , 2015 .
[10] Katerina Tsikaloudaki,et al. The influence of concrete density and conductivity on walls’ thermal inertia parameters under a variety of masonry and insulation placements , 2013 .
[11] Dionysios I. Kolaitis,et al. Comparative assessment of internal and external thermal insulation systems for energy efficient retrofitting of residential buildings , 2013 .
[12] D. Lecomte,et al. Heat diffusion at the boundary of stratified media. Homogenized temperature field and thermal constriction , 2004 .
[13] Francesco Leccese,et al. Multi-layered walls design to optimize building-plant interaction , 2004 .
[14] H. Asan,et al. Investigation of wall's optimum insulation position from maximum time lag and minimum decrement factor point of view , 2000 .
[15] Naouel Daouas,et al. A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads , 2011 .
[16] Omer Kaynakli,et al. A review of the economical and optimum thermal insulation thickness for building applications , 2012 .
[17] Orhan Büyükalaca,et al. A case study for influence of building thermal insulation on cooling load and air-conditioning system in the hot and humid regions , 2010 .
[18] Ferdinando Salata,et al. A Methodological Comparison between Energy and Environmental Performance Evaluation , 2015 .
[19] A. Omer. Energy, environment and sustainable development , 2008 .
[20] Luca Evangelisti,et al. Energy Retrofit Strategies for Residential Building Envelopes: An Italian Case Study of an Early-50s Building , 2015 .
[21] Giuseppe Peter Vanoli,et al. Energy retrofit of historical buildings: theoretical and experimental investigations for the modelli , 2011 .
[22] S. A. Al-Sanea,et al. Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass , 2011 .
[23] Meral Ozel,et al. Effect of insulation location on dynamic heat-transfer characteristics of building external walls and optimization of insulation thickness , 2014 .
[24] Giorgio Baldinelli,et al. A comparison between environmental sustainability rating systems LEED and ITACA for residential buildings , 2015 .
[25] Mohammad S. Al-Homoud,et al. Performance characteristics and practical applications of common building thermal insulation materials , 2005 .
[26] Yu Zhang,et al. Exploring buildings’ secrets: The ideal thermophysical properties of a building’s wall for energy conservation , 2013 .
[27] H. Asan,et al. Effects of wall's insulation thickness and position on time lag and decrement factor , 1998 .
[28] Ibrahim Dincer,et al. Exergy: Energy, Environment and Sustainable Development , 2007 .
[29] J. C. Jaeger,et al. Conduction of Heat in Solids , 1952 .
[30] Fabio Bisegna,et al. Thermophysical parameter estimation of multi-layer walls with stochastic optimization methods , 2010 .
[31] Kenneth E. Goodson,et al. Solid layer thermal-conductivity measurement techniques , 1994 .
[32] S. A. Al-Sanea,et al. Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential , 2012 .
[33] Giorgio Baldinelli,et al. Evaluating in situ thermal transmittance of green buildings masonries—A case study , 2014 .
[34] L. J. Grobler,et al. A new and innovative look at anti-insulation behaviour in building energy consumption , 2008 .