A guide to the application-oriented selection of AC/AC converter topologies

A comprehensive review and a comparative evaluation of AC/AC converter topologies are presented. This provides guidelines for selecting an optimum technology for a given application. It is noted that, while hard switched and load commutated converters will continue to dominate the high power market in the foreseeable future, resonant soft switched converters are likely to make advances. New soft switched technologies, at least at the low power level, are expected to find more widespread use in OEM and high-performance market situations before expanding into industrial end-use applications. Of the resonant topologies, the clamped resonant DC link (RDCL) seems most appropriate for lower power levels, while the resonant pole technology is applicable for higher power ranges. Of the resonant link converters, the series resonant converter (SRC) is likely to remain the dominant one, especially for applications calling for its inherent bidirectionality and capability to operate into unbalanced loads. Successful matrix converter implementation still hinges on further development of the MCT.<<ETX>>

[1]  Y. Murai,et al.  Pulse-split concept in series resonant Dc link power conversion for induction motor drives , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[2]  R.W. De Doncker,et al.  The auxiliary resonant commutated pole converter , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[3]  V. Toigo,et al.  A synchronized resonant DC link converter for soft-switched PWM , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[4]  R.W. De Doncker,et al.  Circuit utilization characteristics of MOS-controlled thyristors , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[5]  J. Ben Klaassens,et al.  Series-resonant AC-power interface with an optimal power factor and enhanced conversion ratio , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[6]  M. Venturini A new sine wave in sine wave out, conversion technique which eliminates reactive elements , 1980 .

[7]  G. Venkataramanan,et al.  Design methodologies for soft switched inverters , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[8]  Jung G. Cho,et al.  Soft-switched matrix converter for high frequency direct AC-to-AC power conversion , 1992 .

[9]  D.H. Braun,et al.  Regenerative converter for PWM AC drives , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[10]  Thomas A. Lipo,et al.  Implementation of a controlled rectifier using AC-AC matrix converter theory , 1989 .

[11]  P. L. Hower,et al.  Power semiconductor devices: an overview , 1988, Proc. IEEE.

[12]  M. H. Kheraluwala,et al.  Delta modulation strategies for resonant link inverters , 1990 .

[13]  M. Ehsani,et al.  New modulation methods for force-commutated direct frequency changers , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[14]  R.R. Beasant,et al.  An approach to the realization of a high-power Venturini converter , 1990, 21st Annual IEEE Conference on Power Electronics Specialists.

[15]  A. Alesina,et al.  Analysis and design of optimum-amplitude nine-switch direct AC-AC converters , 1989 .

[16]  P. Ziogas The Delta Modulation Technique in Static PWM Inverters , 1981, IEEE Transactions on Industry Applications.

[17]  Muhammad H. Rashid,et al.  A new PWM speed control system for high-performance AC motor drives , 1990 .

[18]  Thomas A. Lipo,et al.  Recent progress in the development in solid-state AC motor drives , 1988 .

[19]  B.K. Bose,et al.  High frequency quasi-resonant DC voltage notching inverter for AC motor drives , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[20]  Geza Joos,et al.  A model reference adaptive PWM technique , 1989 .

[21]  J.-W. Lee,et al.  A novel three-phase quasi-resonant DC link inverter , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[22]  D. Borojevic,et al.  Space vector modulation with unity input power factor for forced commutated cycloconverters , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[23]  Richard G. Hoft,et al.  Generalized Techniques of Harmonic Elimination and Voltage Control in Thyristor Inverters: Part I--Harmonic Elimination , 1973 .

[24]  C. F. Christiansen,et al.  A synchronization technique for static delta-modulated PWM inverters , 1988 .

[25]  Phoivos D. Ziogas,et al.  State-of-the-art carrier PWM techniques: a critical evaluation , 1988 .

[26]  Deepak Divan,et al.  Zero-switching-loss inverters for high-power applications , 1989 .

[27]  Mitsuyuki Hombu,et al.  A New Current Source GTO Inverter with Sinusoidal Output Voltage and Current , 1985, IEEE Transactions on Industry Applications.

[28]  J. B. Klaassens,et al.  Variable-speed generation with the series-resonant converter , 1988 .

[29]  D.G. Holmes,et al.  A new modulation algorithm for voltage and current source inverters, based on AC-AC matrix converter theory , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[30]  Phoivos D. Ziogas,et al.  State of the art PWM techniques: A critical evaluation , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[31]  R. Hoft,et al.  Generalized Techniques of Harmonic Elimination and Voltage Control in Thyristor Inverters: Part II --- Voltage Control Techniques , 1974 .

[32]  K. E. Bornhardt,et al.  Novel soft-switched GTO-inverter circuits , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[33]  M. Azizur Rahman,et al.  Performance Analysis of Delta Modulated PWM Inverters , 1987, IEEE Transactions on Power Electronics.

[34]  T.A. Lipo,et al.  High frequency series resonant DC link power conversion , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[35]  Deepak Divan,et al.  The Resonant DC Link Converter--A New Concept in Static Power Conversion , 1986, 1986 Annual Meeting Industry Applications Society.

[36]  J. Ben Klaassens DC-AC series-resonant converter system with high internal frequency generating multiphase AC-waveforms for multikilowatt power levels , 1985, 1985 IEEE Power Electronics Specialists Conference.

[37]  J. B. Klaassens,et al.  Three-phase AC-to-AC series-resonant power converter with a reduced number of thyristors , 1989 .

[38]  Thomas A. Lipo,et al.  Power conversion distribution system using a high-frequency AC link , 1988 .