A cyclic austenite reversion treatment for stabilizing austenite in the medium manganese steels

[1]  Wei Li,et al.  Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures , 2017 .

[2]  D. Suh,et al.  Medium Mn transformation-induced plasticity steels: Recent progress and challenges , 2017 .

[3]  S. Yue,et al.  Phase Transformation Behavior of Medium Manganese Steels with 3 Wt Pct Aluminum and 3 Wt Pct Silicon During Intercritical Annealing , 2016, Metallurgical and Materials Transactions A.

[4]  Kangning Zhao,et al.  An introduction to medium-Mn steel: Metallurgy, mechanical properties and warm stamping process , 2016 .

[5]  Mingxin Huang,et al.  Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects , 2016 .

[6]  Young Kook Lee,et al.  Current opinion in medium manganese steel , 2015 .

[7]  R. Misra,et al.  Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content , 2015 .

[8]  Young‐kook Lee,et al.  Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite , 2015 .

[9]  A. Zhao,et al.  A novel design to enhance the amount of retained austenite and mechanical properties in low-alloyed steel , 2014 .

[10]  S. J. Lee,et al.  The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel , 2014 .

[11]  Young‐kook Lee,et al.  The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels , 2014 .

[12]  B. C. Cooman,et al.  Application of Quenching and Partitioning Processing to Medium Mn Steel , 2014, Metallurgical and Materials Transactions A.

[13]  B. D. Cooman,et al.  On the Selection of the Optimal Intercritical Annealing Temperature for Medium Mn TRIP Steel , 2013, Metallurgical and Materials Transactions A.

[14]  O. Bouaziz,et al.  Evolution of microstructure and mechanical properties of medium Mn steels during double annealing , 2012 .

[15]  Seok-Jae Lee,et al.  Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning , 2011 .

[16]  Zhi-Gang Yang,et al.  Kinetics of Reverse Transformation from Pearlite to Austenite in an Fe-0.6 Mass pct C Alloy and the Effects of Alloying Elements , 2011 .

[17]  Han. Dong,et al.  Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel , 2011 .

[18]  D. Matlock,et al.  Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel , 2011 .

[19]  Seok-Jae Lee,et al.  Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steel , 2011 .

[20]  D. Matlock,et al.  Austenite stabilization through manganese enrichment , 2011 .

[21]  Wenquan Cao,et al.  Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite , 2010 .

[22]  Jonathan P. Wright,et al.  Martensitic transformation of individual grains in low-alloyed TRIP steels , 2007 .

[23]  Jonathan P. Wright,et al.  Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling , 2005 .