Instrumentation for experiments on a fuel element mock-up for the study of thermal hydraulics for loss of cooling or coolant scenarios in spent fuel pools
暂无分享,去创建一个
Antonio Hurtado | Uwe Hampel | Martin Arlit | Christine Partmann | Eckhard Schleicher | Christoph Schuster | U. Hampel | A. Hurtado | E. Schleicher | C. Schuster | M. Arlit | Christine Partmann
[1] S. Schulz,et al. Convective heat transfer in a semi-closed BWR-fuel assembly in absence of water , 2014 .
[2] Murray S. Korman,et al. Fundamentals of hot wire anemometry , 1986 .
[3] Allen S. Benjamin,et al. Spent Fuel Heatup Following Loss of Water during Storage , 1978 .
[4] Horst-Michael Prasser,et al. Thermo-resistive mesh sensors (TMS) for temperature field measurements , 2011 .
[5] S. Churchill,et al. Correlating equations for laminar and turbulent free convection from a vertical plate , 1975 .
[6] G. R. Sarma,et al. Automated constant voltage anemometer for measurements with fluid temperature drifts , 2002 .
[7] G. R. Sarma. Analysis of a constant voltage anemometer circuit , 1993, 1993 IEEE Instrumentation and Measurement Technology Conference.
[8] Virginijus Vileiniškis,et al. Analysis of the processes in spent fuel pools of Ignalina NPP in case of loss of heat removal , 2010 .
[9] H. H. Bruun,et al. Hot-Wire Anemometry: Principles and Signal Analysis , 1996 .
[10] Uwe Hampel,et al. Enhanced Local Void and Temperature Measurements for Highly Transient Multiphase Flows , 2008, IEEE Transactions on Instrumentation and Measurement.
[11] Kenneth D. Kok,et al. Nuclear engineering handbook , 2009 .
[12] Uwe Hampel,et al. Temperature Grid Sensor for the Measurement of Spatial Temperature Distributions at Object Surfaces , 2013, Sensors.