Micro structural features and mechanical properties of Al-Al3Ti composite fabricated by in-situ powder metallurgy route

[1]  J. Rexach,et al.  Comparative study of Al-TiAl composites with different intermetallic volume fractions and particle sizes , 2005 .

[2]  A. Jha,et al.  In situ fabrication of Al3Ti particle reinforced aluminium alloy metal–matrix composites , 2004 .

[3]  W. M. Rainforth,et al.  The effect of heat treatment at 500–655 °C on the microstructure and properties of mechanically alloyed Al–Ti–O based material , 2003 .

[4]  A. Contreras,et al.  Structural and chemical characterization of precipitates in Al-2024/TiC composites , 2003 .

[5]  M. Lieblich,et al.  Mechanical properties of some PM aluminide and silicide reinforced 2124 aluminium matrix composites , 2002 .

[6]  R. Varin.  Intermetallic-reinforced light-metal matrix in-situ composites , 2002 .

[7]  T. Srivatsan,et al.  Interrelationship between matrix microhardness and ultimate tensile strength of discontinuous particulate-reinforced aluminum alloy composites , 2001 .

[8]  W. M. Rainforth,et al.  Evolution of microstructure and hardening, and the role of Al3Ti coarsening, during extended thermal treatment in mechanically alloyed Al-Ti-O based materials , 2001 .

[9]  Jin-Ming Wu,et al.  Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys , 2000 .

[10]  Jin-Ming Wu,et al.  Contributions of the particulate reinforcement to dry sliding wear resistance of rapidly solidified Al-Ti alloys , 2000 .

[11]  Sie Chin Tjong,et al.  Microstructural and mechanical characteristics of in situ metal matrix composites , 2000 .

[12]  A. Kennedy,et al.  Reaction in Al-Ti-C powders and its relation to the formation and stability of TiC in Al at high temperatures , 2000 .

[13]  L. Klinger,et al.  Kinetics of two-phase layer growth during reactive diffusion , 1999 .

[14]  F. Williams,et al.  Effects of interphase strength on the damage modes and mechanical behaviour of metal–matrix composites , 1999 .

[15]  J. Heerens,et al.  Correlation between fracture strain and mean free path in P/M Al–Ti alloys , 1998 .

[16]  A. Katsman,et al.  On the problem of high-rate reactive diffusion , 1998 .