Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

[1]  J. Yoon,et al.  Machine learning-based constitutive model for J2- plasticity , 2021, International Journal of Plasticity.

[2]  K. Inal,et al.  Evolution of subsequent yield surfaces with plastic deformation along proportional and non-proportional loading paths on annealed AA6061 alloy: Experiments and crystal plasticity finite element modeling , 2021 .

[3]  A. Mayer,et al.  Dislocation nucleation in Al single crystal at shear parallel to (111) plane: Molecular dynamics simulations and nucleation theory with artificial neural networks , 2021 .

[4]  Jian Lu,et al.  Constitutive modeling of size-dependent deformation behavior in nano-dual-phase glass-crystal alloys , 2020 .

[5]  D. Mohr,et al.  Strain rate and temperature dependent fracture of aluminum alloy 7075: Experiments and neural network modeling , 2020 .

[6]  D. Mohr,et al.  Neural network model describing the temperature- and rate-dependent stress-strain response of polypropylene , 2020 .

[7]  D. Mohr,et al.  Neural network model predicting forming limits for Bi-linear strain paths , 2020 .

[8]  Julian N. Heidenreich,et al.  On the potential of recurrent neural networks for modeling path dependent plasticity , 2020 .

[9]  Akinori Yamanaka,et al.  Deep neural network approach to estimate biaxial stress-strain curves of sheet metals , 2020 .

[10]  Dirk Mohr,et al.  Using neural networks to represent von Mises plasticity with isotropic hardening , 2020 .

[11]  M Mozaffar,et al.  Deep learning predicts path-dependent plasticity , 2019, Proceedings of the National Academy of Sciences.

[12]  M. Kuna,et al.  A hybrid approach to simulate the homogenized irreversible elastic–plastic deformations and damage of foams by neural networks , 2019, International Journal of Plasticity.

[13]  Usman Ali,et al.  Application of artificial neural networks in micromechanics for polycrystalline metals , 2019, International Journal of Plasticity.

[14]  Christian C. Roth,et al.  Machine-learning based temperature- and rate-dependent plasticity model: Application to analysis of fracture experiments on DP steel , 2019, International Journal of Plasticity.

[15]  J. Imbert,et al.  Effects of coupling anisotropic yield functions with the optimization process of extruded aluminum front rail geometries in crashworthiness , 2017 .

[16]  Daniel E. Green,et al.  The Use of genetic algorithm and neural network to predict rate-dependent tensile flow behaviour of AA5182-O sheets , 2016 .

[17]  R. Kaibyshev,et al.  Effect of Grain Refinement on Jerky Flow in an Al-Mg-Sc Alloy , 2016, Metallurgical and Materials Transactions A.

[18]  H. Huh,et al.  Evaluation of dynamic hardening models for BCC, FCC, and HCP metals at a wide range of strain rates , 2014 .

[19]  A. Pandey,et al.  Negative to positive strain rate sensitivity in 5xxx series aluminum alloys: Experiment and constitutive modeling , 2014 .

[20]  Yung-Hui Lee,et al.  The parameters effect on performance in ANN for hand gesture recognition system , 2011, Expert Syst. Appl..

[21]  M. Baig,et al.  Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy , 2011 .

[22]  R. H. Wagoner,et al.  A plastic constitutive equation incorporating strain, strain-rate, and temperature , 2010 .

[23]  John E. Carsley,et al.  Forming of AA5182-O and AA5754-O at elevated temperatures using coupled thermo-mechanical finite element models , 2007 .

[24]  Douglas E. Smith,et al.  Incorporating Neural Network Material Models Within Finite Element Analysis for Rheological Behavior Prediction , 2007 .

[25]  R. Armstrong,et al.  Dislocation-mechanics-based constitutive relations for material dynamics calculations , 1987 .

[26]  M. Poletti,et al.  A dislocation-based model for the microstructure evolution and the flow stress of a Ti5553 alloy , 2021 .

[27]  W. Muhammad,et al.  A machine learning framework to predict local strain distribution and the evolution of plastic anisotropy & fracture in additively manufactured alloys , 2021, International Journal of Plasticity.

[28]  G. R. Johnson,et al.  A CONSTITUTIVE MODEL AND DATA FOR METALS SUBJECTED TO LARGE STRAINS, HIGH STRAIN RATES AND HIGH TEMPERATURES , 2018 .

[29]  Wei Chen,et al.  Using genetic algorithm-back propagation neural network prediction and finite-element model simulation to optimize the process of multiple-step incremental air-bending forming of sheet metal , 2010 .