The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques

Advances in engineering the microstructure of cementitious composites have led to the development of fiber reinforced Ultra High Performance Concretes (UHPC). The scope of this paper is twofold, first to characterize the nano-mechanical properties of the phases governing the UHPC microstructure by means of a novel statistical nanoindentation technique; then to upscale those nanoscale properties, by means of continuum micromechanics, to the macroscopic scale of engineering applications. In particular, a combined investigation of nanoindentation, scanning electron microscope (SEM) and X-ray Diffraction (XRD) indicates that the fiber-matrix transition zone is relatively defect free. On this basis, a four-level multiscale model with defect free interfaces allows to accurately determine the composite stiffness from the measured nano-mechanical properties. Besides evidencing the dominant role of high density calcium silicate hydrates and the stiffening effect of residual clinker, the suggested model may become a useful tool for further optimizing cement-based engineered composites.

[1]  A. Zaoui.  Continuum Micromechanics: Survey , 2002 .

[2]  Matthew J. DeJong,et al.  The nanogranular behavior of C-S-H at elevated temperatures (up to 700 °C) , 2007 .

[3]  Jacek Gondzio,et al.  An algorithm for computing the compressive strength of heterogeneous cohesive-frictional materials – Application to cement paste , 2007 .

[4]  L. Dormieux,et al.  Non‐Saturated Microporomechanics , 2006 .

[5]  Franz-Josef Ulm,et al.  Grid indentation analysis of composite microstructure and mechanics: Principles and validation , 2006 .

[6]  Surendra P. Shah,et al.  A Reliable Technique to Determine the Local Mechanical Properties at the Nanoscale for Cementitious Materials , 2007 .

[7]  Franz-Josef Ulm,et al.  Statistical indentation techniques for hydrated nanocomposites: concrete, bone, and shale , 2007 .

[8]  K. V. Van Vliet,et al.  Dealing with imperfection: quantifying potential length scale artefacts from nominally spherical indenter probes , 2007 .

[9]  Benjamin Gathier,et al.  Multiscale strength homogenization : application to shale nanoindentation , 2008 .

[10]  P. Richard,et al.  Reactive Powder Concretes With High Ductility and 200 - 800 Mpa Compressive Strength , 1994, "SP-144: Concrete Technology: Past, Present, and Future".

[11]  P. Rossi,et al.  High Performance Multimodal Fiber Reinforced Cement Composites (HPMFRCC) , 1997 .

[12]  Surendra P. Shah,et al.  Nanoscale Characterization of Cementitious Materials , 2008 .

[13]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[14]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[15]  Bob Cather,et al.  Ultra-high performance fibre-reinforced concrete , 2005 .

[16]  F. Ulm,et al.  On the use of nanoindentation for cementitious materials , 2003 .

[17]  Denis Damidot,et al.  Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker , 2001 .

[18]  L. A. Galin,et al.  CONTACT PROBLEMS IN THE THEORY OF ELASTICITY , 1961 .

[19]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[20]  Jeffrey J. Thomas,et al.  Reply to discussion of the paper “A multi-technique investigation of the nanoporosity of cement paste” , 2007 .

[21]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[22]  Mahalia Miller,et al.  Surface Roughness Criteria for Cement Paste Nanoindentation , 2008 .

[23]  Zdeněk P. Bažant,et al.  Creep, shrinkage and durability mechanics of concrete and other quasi-brittle materials : proceedings of the sixth international conference CONCREEP-6@MIT, 20-22 August 2001, Cambridge(MA), USA , 2001 .

[24]  F. Ulm,et al.  The nanogranular nature of C–S–H , 2007 .

[25]  F. Ulm,et al.  The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling , 2004 .

[26]  Benjamin A. Graybeal,et al.  Material Property Characterization of Ultra-High Performance Concrete , 2006 .

[27]  P. Richard,et al.  Composition of reactive powder concretes , 1995 .

[28]  G. Constantinides.  The elastic properties of calcium leached cement pastes and mortars : a multi-scale investigation , 2002 .

[29]  J. E. Gillott,et al.  Microstructural investigation of innovative UHPC , 1999 .

[30]  Franz-Josef Ulm,et al.  Hardness-packing density scaling relations for cohesive-frictional porous materials , 2008 .

[31]  Sidney Mindess,et al.  Fibre Reinforced Cementitious Composites , 1990 .

[32]  François Toutlemonde,et al.  Innovative Design of Ultra High-Performance Fiber Reinforced Concrete Ribbed Slab: Experimental Validation and Preliminary Detailed Analyses , 2005 .

[33]  Laurent Frouin,et al.  Microstructural analysis of RPC (Reactive Powder Concrete) , 1995 .