Analysis of local Al-doped back surface fields for high efficiency screen-printed solar cells

In this paper, we investigate the surface recombination of local screen-printed aluminum contacts applied to rear passivated solar cells. We measure the surface recombination velocity by microwave-detected photoconductance decay measurements on test wafers with various contact geometries and compare two different aluminum pastes. The aluminum paste which is optimized for local contacts shows a deep and uniform local back surface field that results in Smet = 600 cm/s on 1.5 Ωcm p-type silicon. In contrast, a standard Al paste for full-area metallization shows a nonuniform back surface field and a Smet of 2000 cm/s on the same material. We achieve an area-averaged rear surface recombination velocity Srear = (65 ± 20) cm/s for line contacts with a pitch of 2 mm. The application of the optimized paste to screen-printed solar cells with dielectric surface passivation results in efficiencies of up to 19.2 % with a Voc = 655 mV and a Jsc = 38.4 mA/cm² on 125×125 mm² p-type Cz silicon wafers. The internal quantum efficiency analysis reveals Srear = (70 ± 30) cm/s which is in agreement with our lifetime results. Applying fine line screenprinting, efficiencies up to 19.4 % are demonstrated.

[1]  Bernhard Fischer,et al.  Loss analysis of crystalline silicon solar cells using photoconductance and quantum efficiency measurements , 2003 .

[2]  Gunnar Schubert,et al.  Silicon diffusion in aluminum for rear passivated solar cells , 2011 .

[3]  R. Alcubilla,et al.  Surface passivation of p-type crystalline Si by plasma enhanced chemical vapor deposited amorphous SiC x :H films , 2001 .

[4]  K. Bothe,et al.  Recombination at local aluminum-alloyed silicon solar cell base contacts by dynamic infrared lifetime mapping , 2011 .

[5]  Sebastian Gatz,et al.  Recombination at laser-processed local base contacts by dynamic infrared lifetime mapping , 2010 .

[6]  Jürgen H. Werner,et al.  Quantum efficiency analysis of thin-layer silicon solar cells with back surface fields and optical confinement , 1996 .

[7]  K. Bothe,et al.  19.4%‐efficient large‐area fully screen‐printed silicon solar cells , 2011 .

[8]  Paul A. Basore,et al.  Extended spectral analysis of internal quantum efficiency , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[9]  T. Falcon.  High Accuracy, High Aspect Ratio Metallization on Silicon Solar Cells Using a Print on Print Process , 2010 .

[10]  S. Peters.  Rapid Thermal Processing of Crystalline Silicon Materials and Solar Cells , 2004 .

[11]  R. Brendel,et al.  Analytical model for the optimization of locally contacted solar cells , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..

[12]  A. Rohatgi,et al.  Investigation of Modified Screen-Printing Al Pastes for Local Back Surface Field Formation , 2006, 2006 IEEE 4th World Conference on Photovoltaic Energy Conference.

[13]  Wmm Erwin Kessels,et al.  Surface passivation of high‐efficiency silicon solar cells by atomic‐layer‐deposited Al2O3 , 2008 .

[14]  M. Green,et al.  22.8% efficient silicon solar cell , 1989 .