Laser rangefinder-based measuring of crop biomass under field conditions

Knowledge of site-specific crop parameters such as plant height, coverage and biomass density is important for optimising crop management and harvesting processes. Sensors for measuring crop parameters are essential pre-requisites to gather this information. In recent years, laser rangefinder sensors have been adopted in many industrial applications. In agricultural engineering, the potential of laser rangefinders for measuring crop parameters has been little exploited. This paper reports the design and the performance of a measuring system based on a triangulation and a time-of-flight laser rangefinder for estimating crop biomass density in representative crops under field conditions. It was shown that the mean height of reflection point is a suitable parameter for non-contact indirect measurement of crop biomass by laser rangefinder sensors. The main parameters for potential assessment were the coefficient of determination (R2) and the standard error (RMSE) for the relation between crop biomass density and the mean height of the reflection point in crop stands from oilseed rape, winter rye, winter wheat and grassland during the vegetation period in 2006. For the triangulation sensor, R2 was in the range from 0.87 to 0.98 and for the time-of-flight sensor in the range from 0.75 to 0.99 for both fresh matter and dry matter density. The triangulation sensor had a reduced suitability caused by masking effects of the reflected beam and because of limited measuring range. Based on the results of experiments and technical data, it was concluded that the time-of-flight principle has good potential for site-specific crop management.

[1]  N. Hutchings,et al.  An ultrasonic rangefinder for measuring the undisturbed surface height of continuously grazed grass swards , 1990 .

[2]  U. Meier,et al.  Growth stages of mono- and dicotyledonous plants , 1997 .

[3]  A. Munack,et al.  Prospects in agricultural engineering in the information age : technological developments for the producer and the consumer , 1999 .

[4]  Aloysius Wehr,et al.  Airborne laser scanning—an introduction and overview , 1999 .

[5]  G. M. Richardson,et al.  IT—Information Technology and the Human Interface: Comparison of Different Spray Volume Deposition Models Using LIDAR Measurements of Apple Orchards , 2002 .

[6]  W. Paul,et al.  Measuring crop density and soil humidity by pulsed radar , 2002 .

[7]  W. M. Miller,et al.  Investigation of Laser and Ultrasonic Ranging Sensors for Measurements of Citrus Canopy Volume , 2002 .

[8]  Characterisation of winter wheat using measurements of normalised difference vegetation index and crop height. , 2003 .

[9]  P. C. Robert,et al.  A sensor for rapid estimation of plant biomass. , 2003 .

[10]  Guido Thösink,et al.  Optoelektronisches Sensorsystem zur Messung der Pflanzenbestandsdichte , 2004 .

[11]  Integrating synthetic aperture radar with optical information for crop management applications. , 2004 .

[12]  Systems for site-specific on the go control of nitrogen top-dressing during spreading. , 2004 .

[13]  D. Ehlert,et al.  Widescale testing of the Crop-meter for site-specific farming , 2006, Precision Agriculture.

[14]  Höhenführung für Laser-Abstandssensoren , 2006 .

[15]  A. Bienert,et al.  APPLICATION OF TERRESTRIAL LASER SCANNERS FOR THE DETERMINATION OF FOREST INVENTORY PARAMETRS , 2006 .

[16]  Assessment of laser rangefinder principles for measuring crop biomass. , 2007 .

[17]  J. De Baerdemaeker,et al.  Crop stand density prediction using LIDAR-sensors. , 2008 .

[18]  Rolf Adamek,et al.  Messeigenschaften von Laser-Abstandssensoren , 2008 .