Residual Generator-Based Controller Design via Process Measurements

This paper deals with designing the controller of LTI system based on data-driven techniques. We propose a scheme embedding a residual generator into control loop based on realization of the Youla parameterization for advanced controller design. Basic idea of the proposed scheme is constructing the residual generator by using the solution of the Luenberger equations as well as the well-established relationship between diagnosis observer (DO) and the parity vector. Besides, the core of the above idea is straightly using the process measurements to obtain the parity space based on the Subspace Identification Method (SIM), rather than establishing the system model. At last, a simulation based on the numerical model demonstrates the performance and effectiveness of the proposed scheme.

[1]  A. Willsky,et al.  Analytical redundancy and the design of robust failure detection systems , 1984 .

[2]  Tore Hägglund,et al.  Automatic Tuning and Adaptation for PID Controllers - A Survey , 1992 .

[3]  Jin Wang,et al.  A new subspace identification approach based on principal component analysis , 2002 .

[4]  Gibaek Lee,et al.  Multiple-Fault Diagnosis of the Tennessee Eastman Process Based on System Decomposition and Dynamic PLS , 2004 .

[5]  T. Jeinsch,et al.  Integration of fdi functional units into embedded tracking control loops and its application to FDI in engine control systems , 2005, Proceedings of 2005 IEEE Conference on Control Applications, 2005. CCA 2005..

[6]  T. Jeinsch,et al.  Embedded model-based fault diagnosis for on-board diagnosis of engine control systems , 2005, Proceedings of 2005 IEEE Conference on Control Applications, 2005. CCA 2005..

[7]  Jin Wang,et al.  Closed-loop subspace identification using the parity space , 2006, Autom..

[8]  Steven X. Ding,et al.  Disturbance decoupling in fault detection of linear periodic systems , 2007, Autom..

[9]  Sirkka-Liisa Jämsä-Jounela,et al.  Future Trends in Process Automation , 2007 .

[10]  R. Ocampo-Pérez,et al.  Adsorption of Fluoride from Water Solution on Bone Char , 2007 .

[11]  Steven X. Ding,et al.  Model-based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools , 2008 .

[12]  Toru Yamamoto,et al.  Design of a Data-Driven PID Controller , 2009, IEEE Transactions on Control Systems Technology.

[13]  Ping Zhang,et al.  Subspace method aided data-driven design of fault detection and isolation systems , 2009 .

[14]  Torsten Jeinsch,et al.  Feedback Control Structures, Embedded Residual Signals, and Feedback Control Schemes With an Integrated Residual Access , 2010, IEEE Transactions on Control Systems Technology.

[15]  Steven X. Ding,et al.  Recursive identification algorithms to design fault detection systems , 2010 .

[16]  J. Golinval,et al.  Fault detection based on Kernel Principal Component Analysis , 2010 .

[17]  Shengyuan Xu,et al.  Adaptive Output-Feedback Fuzzy Tracking Control for a Class of Nonlinear Systems , 2011, IEEE Transactions on Fuzzy Systems.

[18]  Data-Driven Design of Observers and Its Applications , 2011 .

[19]  Peng Shi,et al.  Stability and Stabilization of Switched Linear Systems With Mode-Dependent Average Dwell Time , 2012, IEEE Transactions on Automatic Control.

[20]  Peng Shi,et al.  Asynchronously switched control of a class of slowly switched linear systems , 2012, Syst. Control. Lett..

[21]  Ping Zhang,et al.  A comparison study of basic data-driven fault diagnosis and process monitoring methods on the benchmark Tennessee Eastman process , 2012 .

[22]  Riccardo Muradore,et al.  A PLS-Based Statistical Approach for Fault Detection and Isolation of Robotic Manipulators , 2012, IEEE Transactions on Industrial Electronics.

[23]  Hamid Reza Karimi,et al.  Data-driven adaptive observer for fault diagnosis , 2012 .

[24]  Shen Yin.  Data driven design of fault diagnosis systems , 2012 .

[25]  Gin-Der Wu,et al.  A Vectorization-Optimization-Method-Based Type-2 Fuzzy Neural Network for Noisy Data Classification , 2013, IEEE Transactions on Fuzzy Systems.

[26]  Steven X. Ding,et al.  Data-driven monitoring for stochastic systems and its application on batch process , 2013, Int. J. Syst. Sci..

[27]  O. Kaynak,et al.  Asymptotic stability and stabilisation of uncertain delta operator systems with time-varying delays , 2013 .

[28]  Shengyuan Xu,et al.  Observer-Based Adaptive Neural Network Control for Nonlinear Stochastic Systems With Time Delay , 2013, IEEE Transactions on Neural Networks and Learning Systems.

[29]  Honghai Liu,et al.  Adaptive Sliding-Mode Control for Nonlinear Active Suspension Vehicle Systems Using T–S Fuzzy Approach , 2013, IEEE Transactions on Industrial Electronics.

[30]  Steven X. Ding,et al.  Real-Time Implementation of Fault-Tolerant Control Systems With Performance Optimization , 2014, IEEE Transactions on Industrial Electronics.

[31]  Hamid Reza Karimi,et al.  Data-driven design of robust fault detection system for wind turbines , 2014 .

[32]  Hamid Reza Karimi,et al.  Novel Stability Criteria for T--S Fuzzy Systems , 2014, IEEE Transactions on Fuzzy Systems.

[33]  Hamid Reza Karimi,et al.  Output-Feedback-Based $H_{\infty}$ Control for Vehicle Suspension Systems With Control Delay , 2014, IEEE Transactions on Industrial Electronics.