Reviewing Metallic PEMFC Bipolar Plates

A bipolar plate is one of the most important components in a polymer exchange membrane fuel cell (PEMFC) stack and has multiple functions. Metallic bipolar plate candidates have advantages over composite rivals in excellent electrical and thermal conductivity, good mechanical strength, high chemical stability, very wide alloy choices, low cost and, most importantly, existing pathways for high-volume, high-speed mass production. The challenges with metallic bipolar plates are the higher contact resistance and possible corrosion products, which may contaminate the membrane electrode assembly. This review evaluates the candidate metallic and coating materials for bipolar plates and gives the perspective of the research trends.

[1]  Ching-Han Huang,et al.  Corrosion-resistant component for PEM fuel cells , 2004 .

[2]  P. J. Sebastian,et al.  Conducting polymer-coated stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC) , 2005 .

[3]  Ramana G. Reddy,et al.  Materials and design development for bipolar/end plates in fuel cells , 2004 .

[4]  Daniel Guay,et al.  New Materials and Procedures to Protect Metallic PEM Fuel Cell Bipolar Plates , 2002 .

[5]  Suzhen Luo,et al.  Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments , 2004 .

[6]  Juncai Sun,et al.  Plasma-nitrided austenitic stainless steel 316L as bipolar plate for PEMFC , 2006 .

[7]  Allen M. Hermann,et al.  Bipolar plates for PEM fuel cells: A review , 2005 .

[8]  T. Chin,et al.  Catalyst layer-free carbon-coated steel-An easy route to bipolar plates of polymer electrolyte membrane fuel cells : Characterization on structure and electrochemistry , 2009 .

[9]  D. Wee,et al.  Thermally nitrided Cu–5.3Cr alloy for application as metallic separators in PEMFCs , 2008 .

[10]  Xiaoming Ren,et al.  Pem fuel cells for transportation and stationary power generation applications , 1996 .

[11]  Michio Hori,et al.  Study on metallic bipolar plate for proton exchange membrane fuel cell , 2006 .

[12]  Joyce Smith Cooper,et al.  Design analysis of PEMFC bipolar plates considering stack manufacturing and environment impact , 2004 .

[13]  Wai-Bun Lui,et al.  Performance of the gold-plated titanium bipolar plates for the light weight PEM fuel cells , 2006 .

[14]  Heli Wang,et al.  Plasma Nitrided Type 349 Stainless Steel for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate—Part II: Nitrided in Ammonia Plasma , 2010 .

[15]  M. Smit,et al.  Study of electrodeposited polypyrrole coatings for the corrosion protection of stainless steel bipolar plates for the PEM fuel cell , 2006 .

[16]  A. Iversen.  Stainless steels in bipolar plates—Surface resistive properties of corrosion resistant steel grades during current loads , 2006 .

[17]  Yilun Ren,et al.  Effect of conducting composite polypyrrole/polyaniline coatings on the corrosion resistance of type 304 stainless steel for bipolar plates of proton-exchange membrane fuel cells , 2008 .

[18]  Theodore M. Besmann,et al.  Carbon/Carbon Composite Bipolar Plate for Proton Exchange Membrane Fuel Cells , 2000 .

[19]  Ching-Han Huang,et al.  Investigation of PVD coating on corrosion resistance of metallic bipolar plates in PEM fuel cell , 2003 .

[20]  E. A. Payzant,et al.  Protective nitride formation on stainless steel alloys for proton exchange membrane fuel cell bipolar plates , 2007 .

[21]  E. Fleury,et al.  Corrosion studies on Fe-based amorphous alloys in simulated PEM fuel cell environment , 2005 .

[22]  Seung‐Taek Myung,et al.  High nitrogen stainless steel as bipolar plates for proton exchange membrane fuel cells , 2008 .

[23]  Yoshiaki Matsuo,et al.  Carbon-coated stainless steel as PEFC bipolar plate material , 2007 .

[24]  D. Mahajan,et al.  Metal bipolar plates for PEM fuel cell—A review , 2007 .

[25]  Jung Joong Lee,et al.  Inductively coupled plasma nitriding of chromium electroplated AISI 316L stainless steel for PEMFC bipolar plate , 2009 .

[26]  O. J. Murphy,et al.  Low-cost light weight high power density PEM fuel cell stack , 1998 .

[27]  EunAe Cho,et al.  Characteristics of composite bipolar plates for polymer electrolyte membrane fuel cells , 2004 .

[28]  Seung‐Taek Myung,et al.  Nanosized TiN–SBR hybrid coating of stainless steel as bipolar plates for polymer electrolyte membrane fuel cells , 2008 .

[29]  Yan Wang,et al.  An investigation of the electrochemical properties of PVD TiN-coated SS410 in simulated PEM fuel cell environments , 2007 .

[30]  Jean-Pierre Petit,et al.  Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study , 2009 .

[31]  B. Yi,et al.  Carbon-based films coated 316L stainless steel as bipolar plate for proton exchange membrane fuel cells , 2009 .

[32]  Shuo-Jen Lee,et al.  PVD Coated Bipolar Plates for PEM Fuel Cells , 2005 .

[33]  Karren L. More,et al.  Preferential thermal nitridation to form pin-hole free Cr-nitrides to protect proton exchange membrane fuel cell metallic bipolar plates , 2004 .

[34]  A. Pozio,et al.  Surface conductivity and stability of metallic bipolar plate materials for polymer electrolyte fuel cells , 2006 .

[35]  Seung‐Taek Myung,et al.  Application of Ni-free high nitrogen stainless steel for bipolar plates of proton exchange membrane fuel cells , 2009 .

[36]  A. Heinzel,et al.  Injection moulded low cost bipolar plates for PEM fuel cells , 2004 .

[37]  John A. Turner,et al.  Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar plates: Part 1: Model Ni–50Cr and austenitic 349™ alloys , 2004 .

[38]  John A. Turner,et al.  SnO2:F coated austenite stainless steels for PEM fuel cell bipolar plates , 2007 .

[39]  C. Zawodzinski,et al.  Assessment of thermal nitridation to protect metal bipolar plates in polymer electrolyte membrane fuel cells , 2002 .

[40]  L. Antoni,et al.  Corrosion Behaviour of Stainless Steel Plates in PEMFC Working Conditions , 2006 .

[41]  Yao Shen,et al.  An investigation into nickel implanted 316L stainless steel as a bipolar plate for PEM fuel cell , 2008 .

[42]  Dae-Geun Nam,et al.  Thermal nitridation of chromium electroplated AISI316L stainless steel for polymer electrolyte membrane fuel cell bipolar plate , 2007 .

[43]  Hitoshi Yashiro,et al.  Corrosion behavior of austenitic stainless steels as a function of pH for use as bipolar plates in polymer electrolyte membrane fuel cells , 2008 .

[44]  J. Kuo,et al.  Compound material for injection molded PEM fuel cell bipolar plates , 2006, 2008 IEEE International Conference on Sustainable Energy Technologies.

[45]  Juncai Sun,et al.  Study on behavior of plasma nitrided 316L in PEMFC working conditions , 2008 .

[46]  W. Kout,et al.  Bipolar plates for PEM fuel cells , 2003 .

[47]  R. Reddy,et al.  Corrosion resistant low temperature carburized SS 316 as bipolar plate material for PEMFC application , 2008 .

[48]  Harry M. Meyer,et al.  Corrosion behavior of CrN, Cr2N and π phase surfaces on nitrided Ni–50Cr for proton exchange membrane fuel cell bipolar plates , 2006 .

[49]  John A. Turner,et al.  Ferritic stainless steels as bipolar plate material for polymer electrolyte membrane fuel cells , 2004 .

[50]  Heli Wang,et al.  Process modification for coating SnO2:F on stainless steels for PEM fuel cell bipolar plates , 2008 .

[51]  Heli Wang,et al.  Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells , 2003 .

[52]  Suzhen Luo,et al.  Electrochemical corrosion characteristics of type 316 stainless steel in simulated anode environment for PEMFC , 2003 .

[53]  Wai-Bun Lui,et al.  Surface modification and development of titanium bipolar plates for PEM fuel cells , 2006 .

[54]  Ching-Han Huang,et al.  Stainless steel bipolar plates , 2005 .

[55]  Kwi Seong Jeong,et al.  Fuel economy and life-cycle cost analysis of a fuel cell hybrid vehicle , 2002 .

[56]  J. Wind,et al.  Metallic bipolar plates for PEM fuel cells , 2002 .

[57]  Paul Leonard Adcock,et al.  New materials for polymer electrolyte membrane fuel cell current collectors , 1999 .

[58]  K. El-Khatib,et al.  Corrosion-resistant lightweight metallic bipolar plates for PEM fuel cells , 2005 .

[59]  Karren L. More,et al.  Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar plates Part 2: Beneficial modification of passive layer on AISI446 , 2004 .

[60]  R. Borup,et al.  Design and Testing Criteria for Bipolar Plate Materials for Pem Fuel Cell Applications , 1995 .

[61]  K. Weil,et al.  NIOBIUM-CLAD 304L STAINLESS STEEL PEMFC BIPOLAR PLATE MATERIAL: TENSILE AND BEND PROPERTIES , 2007 .

[62]  Göran Sundholm,et al.  A Novel Polymer Electrolyte Fuel Cell for Laboratory Investigations and in situ Contact Resistance Measurements , 2001 .

[63]  Nigel P. Brandon,et al.  Review of Materials and Characterization Methods for Polymer Electrolyte Fuel Cell Flow-Field Plates , 2007 .

[64]  Nigel P. Brandon,et al.  Recent Advances in Materials for Fuel Cells , 2003 .

[65]  S. El-Enin,et al.  New electroplated aluminum bipolar plate for PEM fuel cell , 2008 .

[66]  P. Adcock,et al.  Stainless steel as a bipolar plate material for solid polymer fuel cells , 2000 .

[67]  D. Hodgson,et al.  New lightweight bipolar plate system for polymer electrolyte membrane fuel cells , 2001 .

[68]  Paul Leonard Adcock,et al.  Bipolar plate materials for solid polymer fuel cells , 2000 .

[69]  Juncai Sun,et al.  Effect of plasma nitriding on behavior of austenitic stainless steel 304L bipolar plate in proton exchange membrane fuel cell , 2007 .

[70]  O. A. Asbjornsen,et al.  Oxygen reduction kinetics at platinum electrodes covered with perfluorinated ionomer in the presence of impurity cations Fe3+, Ni2+ and Cu2+ , 2000 .

[71]  John Turner,et al.  SnO2:F coated ferritic stainless steels for PEM fuel cell bipolar plates , 2007 .

[72]  Bing Yang,et al.  Growth of Cr-Nitrides on commercial Ni–Cr and Fe–Cr base alloys to protect PEMFC bipolar plates , 2007 .

[73]  Ching-Han Huang,et al.  Electroforming of metallic bipolar plates with micro-featured flow field , 2005 .

[74]  A. Sobel.  Technology Opportunities and Challenges , 2009 .

[75]  EunAe Cho,et al.  Performance of a 1 kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates , 2005 .

[76]  J. Scholta,et al.  Investigations on novel low-cost graphite composite bipolar plates , 1999 .

[77]  Yilun Ren,et al.  Corrosion protection of 304 stainless steel bipolar plates using TiC films produced by high-energy micro-arc alloying process , 2007 .

[78]  K. Reifsnider,et al.  Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells , 2008 .

[79]  Karren L. More,et al.  The formation of protective nitride surfaces for PEM fuel cell metallic bipolar plates , 2006 .

[80]  D. Northwood,et al.  An investigation into polypyrrole-coated 316L stainless steel as a bipolar plate material for PEM fuel cells , 2006 .

[81]  B. Steele,et al.  Materials for fuel-cell technologies , 2001, Nature.

[82]  Tse-Hao Ko,et al.  Carbon film-coated 304 stainless steel as PEMFC bipolar plate , 2008 .

[83]  M. De Francesco,et al.  Nafion degradation in PEFCs from end plate iron contamination , 2003 .

[84]  Chemical Treatment Method for the Aluminum Bipolar Plates of PEM Fuel Cells , 2005 .

[85]  B. Yi,et al.  Research progress of aluminium alloy endplates for PEMFCs , 2007 .

[86]  Hazem Tawfik,et al.  Testing and evaluation of aluminum coated bipolar plates of pem fuel cells operating at 70 °C , 2006 .

[87]  R. Hornung,et al.  Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells , 1998 .

[88]  Viral S. Mehta,et al.  Review and analysis of PEM fuel cell design and manufacturing , 2003 .

[89]  Frank A. de Bruijn,et al.  Stainless steel for cost-competitive bipolar plates in PEMFCs , 2000 .

[90]  M. Watanabe,et al.  Metal separators coated with carbon/resin composite layers for PEFCs , 2007 .

[91]  KyooYoung Kim,et al.  A new alloy design concept for austenitic stainless steel with tungsten modification for bipolar plate application in PEMFC , 2007 .

[92]  A. Pozio,et al.  Corrosion Study on Different Types of Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells , 2007 .

[93]  B. Yi,et al.  Coated 316L stainless steel with CrxN film as bipolar plate for PEMFC prepared by pulsed bias arc ion plating , 2008 .

[94]  Hsu-Chiang Kuan,et al.  Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell , 2004 .

[95]  A. Pozio,et al.  Corrosion study of SS430/Nb as bipolar plate materials for PEMFCs , 2008 .

[96]  Heli Wang,et al.  Investigation of a Duplex Stainless Steel as Polymer Electrolyte Membrane Fuel Cell Bipolar Plate Material , 2005 .

[97]  P. J. Sebastian,et al.  Polyaniline and polypyrrole coatings on aluminum for PEM fuel cell bipolar plates , 2008 .

[98]  Mahlon Wilson,et al.  Low-cost composite materials for PEFC bipolar plates , 1999 .

[99]  Young Hwan Kim,et al.  Effects of thermal oxi-nitridation on the corrosion resistance and electrical conductivity of 446M stainless steel for PEMFC bipolar plates , 2009 .

[100]  R. Mallant,et al.  Use of stainless steel for cost competitive bipolar plates in the SPFC , 2000 .

[101]  R. Reddy,et al.  Corrosion studies of a copper–beryllium alloy in a simulated polymer electrolyte membrane fuel cell environment , 2005 .

[102]  K. S. Weil,et al.  Development of a niobium clad PEM fuel cell bipolar plate material , 2007 .

[103]  Osamu Kobayashi,et al.  Mass production cost of PEM fuel cell by learning curve , 2004 .

[104]  D. Mahajan,et al.  Durability and characterization studies of polymer electrolyte membrane fuel cell’s coated aluminum bipolar plates and membrane electrode assembly , 2009 .

[105]  P. Kauranen,et al.  Injection moulding of graphite composite bipolar plates , 2006 .

[106]  Yan Wang,et al.  An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells , 2007 .

[107]  Jung-Gu Kim,et al.  Electrochemical Behavior of CrN Coated on 316L Stainless Steel in Simulated Cathodic Environment of Proton Exchange Membrane Fuel Cell , 2008 .

[108]  Ali Shanian,et al.  TOPSIS multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell , 2006 .

[109]  Shuo-Jen Lee,et al.  Surface modifications of aluminum alloy 5052 for bipolar plates using an electroless deposition process , 2008 .

[110]  K. Jayakumar,et al.  Cost-benefit analysis of commercial bipolar plates for PEMFC's , 2006 .

[111]  E. Ghali,et al.  Corrosion behavior of 316L stainless steel and Zr75Ti25 bulk amorphous alloy in simulated PEMFC anode environment in a solution containing 12.5 ppm H2SO4 + 1.8 ppm HF at 25 and 80 °C , 2006 .

[112]  S. Jack Hu,et al.  Design, manufacturing, and performance of PEM fuel cell metallic bipolar plates , 2008 .

[113]  Heli Wang,et al.  Anodic behavior of high nitrogen-bearing steels in PEMFC environments , 2008 .