Characterization of oil shale pore structure before and after pyrolysis by using X-ray micro CT

Abstract The pyrolysis of oil shale to produce transportation fuels is a complex process. The organic matter in the oil shale is tightly bound with a heterogeneous mineral matrix. Several physical changes occur during the thermal conversion of kerogen in oil shale to produce hydrocarbon products. The creation of pore space during pyrolysis is an important physical process which determines the flow behavior of the pyrolysis products and the ultimate recovery. In this paper, we report the effect of temperature (350–500 °C) on oil shale pyrolysis and creation of pore volume during thermal treatment. One inch diameter oil shale cores from different depths of a single drill hole in the Uinta Basin were used. Increase in the pyrolysis temperature resulted in higher weight loss and a corresponding increase in the oil yield. Three-dimensional X-ray micro tomography (XMT) was performed to characterize and to analyze the nature of the pore network structure before and after pyrolysis. XMT scans of the cores at 42 μm voxel resolution displayed distinguishable features of reaction products and source rock. Unconstrained pyrolysis of organic rich core produced large pore space during thermal treatment. The three-dimensional pore network structure was established with pores as large as 500 μm developed after pyrolysis. Lattice Boltzmann simulation of flow through the developed pore network structure suggested that permeabilities from 173 Darcy to 2919 Darcy can be expected.

[1]  Shan,et al.  Lattice Boltzmann model for simulating flows with multiple phases and components. , 1993, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[2]  John H. Campbell,et al.  Oil shale retorting: effects of particle size and heating rate on oil evolution and intraparticle oil degradation , 1978 .

[3]  L. Coshell,et al.  X-ray computed tomography of Australian oil shales: non-destructive visualization and density determination , 1994 .

[4]  P. R. Tisot.  Properties of Green River Oil Shale Determined from Nitrogen Adsorption and Desorption Isotherms. , 1962 .

[5]  H. Sohn,et al.  Physical behaviour of oil shale at various temperatures and compressive loads: 1. Free thermal expansion , 1983 .

[6]  J. Boon.  The Lattice Boltzmann Equation for Fluid Dynamics and Beyond , 2003 .

[7]  Y. Qian,et al.  Lattice BGK Models for Navier-Stokes Equation , 1992 .

[8]  A. R. Videla,et al.  Simulation of saturated fluid flow in packed particle beds—The lattice-Boltzmann method for the calculation of permeability from XMT images , 2008 .

[9]  H. Sohn,et al.  Physical behaviour of oil shale at various temperatures and compressive loads: 3. Structural failure under loads , 1985 .

[10]  D. Or,et al.  Invasion percolation of single component, multiphase fluids with lattice Boltzmann models , 2003 .

[11]  Chen,et al.  Simulation of multicomponent fluids in complex three-dimensional geometries by the lattice Boltzmann method. , 1996, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[12]  L. Luo,et al.  Theory of the lattice Boltzmann method: From the Boltzmann equation to the lattice Boltzmann equation , 1997 .

[13]  Shiyi Chen,et al.  LATTICE BOLTZMANN METHOD FOR FLUID FLOWS , 2001 .

[14]  Jan D. Miller,et al.  Pore structure analysis of particle beds for fluid transport simulation during filtration , 2004 .

[15]  E. Horwitz,et al.  Quantitative study of the carboxylic acids in Green River oil shale bitumen , 1980 .

[16]  Harvey Gould,et al.  Discrete Boltzmann Systems and Fluid Flows , 1993 .

[17]  Xiumin Jiang,et al.  Change of Pore Structure of Oil Shale Particles during Combustion. Part 1. Evolution Mechanism , 2006 .

[18]  J. Schrodt,et al.  Variations in the pore structure of oil shales during retorting and combustion , 1984 .

[19]  Yaoqing Hu,et al.  THERMAL CRACKING AND CORRESPONDING PERMEABILITY OF FUSHUN OIL SHALE , 2011 .

[20]  Jan D. Miller,et al.  Three-dimensional analysis of particulates in mineral processing systems by cone beam X-ray microtomography , 2004 .

[21]  Haibo Huang,et al.  Distribution of multiphase fluids in porous media: comparison between lattice Boltzmann modeling and micro-x-ray tomography. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[22]  W. Qing,et al.  VARIATION OF THE PORE STRUCTURE DURING MICROWAVE PYROLYSIS OF OIL SHALE , 2010 .