Good Practices for Rechargeable Lithium Metal Batteries

[1]  Jean-Marie Tarascon,et al.  In situ SEM study of the interfaces in plastic lithium cells , 1999 .

[2]  Yuichi Sato,et al.  Overcharge reaction of lithium-ion batteries , 2005 .

[3]  Eric Darcy,et al.  Screening Li-ion batteries for internal shorts , 2007 .

[4]  S. Trussler,et al.  Precision Measurements of the Coulombic Efficiency of Lithium-Ion Batteries and of Electrode Materials for Lithium-Ion Batteries , 2010 .

[5]  Diego Lisbona,et al.  A review of hazards associated with primary lithium and lithium-ion batteries , 2011 .

[6]  C. Jungreuthmayer,et al.  Improving the measurement sensitivity of interdigital dielectric capacitors (IDC) by optimizing the dielectric property of the homogeneous passivation layer , 2012 .

[7]  Ningxin Zhang,et al.  Dissecting anode swelling in commercial lithium-ion batteries , 2012 .

[8]  P. Scharfer,et al.  Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings , 2016, Journal of Coatings Technology and Research.

[9]  Gunther Reinhart,et al.  Research and Demonstration Center for the Production of Large-Area Lithium-Ion Cells , 2013 .

[10]  J. Max Cortner,et al.  Testing lifetime performance of primary batteries , 2013, IEEE Instrumentation & Measurement Magazine.

[11]  Craig B. Arnold,et al.  The Effects of Defects on Localized Plating in Lithium-Ion Batteries , 2015 .

[12]  R. Zengerle,et al.  Morphological Evolution of Electrochemically Plated/Stripped Lithium Microstructures Investigated by Synchrotron X-ray Phase Contrast Tomography. , 2016, ACS nano.

[13]  Zhansheng Guo,et al.  Heat seal properties of polymer–aluminum–polymer composite films for application in pouch lithium-ion battery , 2016 .

[14]  A. Schilling,et al.  Analyzing Bending Stresses on Lithium‐Ion Battery Cathodes induced by the Assembly Process , 2016 .

[15]  Jiaqi Huang,et al.  The gap between long lifespan Li-S coin and pouch cells: The importance of lithium metal anode protection , 2017 .

[16]  Roland Zengerle,et al.  Study of the Mechanisms of Internal Short Circuit in a Li/Li Cell by Synchrotron X-ray Phase Contrast Tomography , 2017 .

[17]  Minggao Ouyang,et al.  Internal short circuit trigger method for lithium-ion battery based on shape memory alloy , 2017 .

[18]  G. Blomgren.  The development and future of lithium ion batteries , 2017 .

[19]  Eric Darcy,et al.  Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits. , 2017 .

[20]  Rezan Demir‐Cakan,et al.  Factors Affecting the Proper Functioning of a 3Ah Li-S Pouch Cell , 2017 .

[21]  M. Winter,et al.  Performance tuning of lithium ion battery cells with area-oversized graphite based negative electrodes , 2018, Journal of Power Sources.

[22]  D. Sauer,et al.  Long-term cycling induced jelly roll deformation in commercial 18650 cells , 2018, Journal of Power Sources.

[23]  Im Doo Jung,et al.  Insights into morphological evolution and cycling behaviour of lithium metal anode under mechanical pressure , 2018, Nano Energy.

[24]  P. Bruce,et al.  Critical stripping current leads to dendrite formation on plating in lithium anode solid electrolyte cells , 2019, Nature Materials.

[25]  Hong Li,et al.  Practical Evaluation of Li-Ion Batteries , 2019, Joule.

[26]  Venkat R. Subramanian,et al.  Pathways for practical high-energy long-cycling lithium metal batteries , 2019, Nature Energy.

[27]  Yang-Kook Sun,et al.  Customizing a Li–metal battery that survives practical operating conditions for electric vehicle applications , 2019, Energy & Environmental Science.

[28]  Eric J. Dufek,et al.  Perspective—Safety Aspects of Energy Storage Testing , 2019, Journal of The Electrochemical Society.

[29]  Ji‐Guang Zhang,et al.  Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions , 2019, Nature Nanotechnology.

[30]  Lan Zhang,et al.  Safety Issues in Lithium Ion Batteries: Materials and Cell Design , 2019, Front. Energy Res..

[31]  Jun Liu,et al.  Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries , 2019, Joule.

[32]  Hongkyung Lee,et al.  High-energy lithium metal pouch cells with limited anode swelling and long stable cycles , 2019, Nature Energy.

[33]  Michael G. Pecht,et al.  Tab Design and Failures in Cylindrical Li-ion Batteries , 2019, IEEE Access.

[34]  J. Dahn,et al.  Exploring the Impact of Mechanical Pressure on the Performance of Anode-Free Lithium Metal Cells , 2019, Journal of The Electrochemical Society.