Carbon Capture and Storage (CCS)

[1]  E. Dahlquist,et al.  Fabrication and characterization of superhydrophobic polypropylene hollow fiber membranes for carbon dioxide absorption , 2012 .

[2]  Jinyue Yan,et al.  Characterization of flue gas in oxy-coal combustion processes for CO2 capture , 2012 .

[3]  Changsui Zhao,et al.  CO2 capture and attrition performance of CaO pellets with aluminate cement under pressurized carbonation , 2012 .

[4]  Marta G. Plaza,et al.  Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications , 2012 .

[5]  Yincheng Guo,et al.  Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution , 2013 .

[6]  David Pallarès,et al.  The role of external heat exchangers in oxy-fuel circulating fluidized bed , 2012 .

[7]  P. Salatino,et al.  A comparative characterization study of Ca-looping natural sorbents , 2013 .

[8]  N. Cai,et al.  Effect of K2CO3·1.5H2O on the regeneration energy consumption of potassium-based sorbents for CO2 capture , 2013 .

[9]  A. Amell,et al.  Experimental evaluation of a 20kW oxygen enhanced self-regenerative burner operated in flameless combustion mode , 2013 .

[10]  Luis M. Romeo,et al.  Hydrodynamical model and experimental results of a calcium looping cycle for CO2 capture , 2013 .

[11]  C. Shaddix,et al.  On the use of single-film models to describe the oxy-fuel combustion of pulverized coal char , 2012 .

[12]  Paolo Chiesa,et al.  Using MCFC for high efficiency CO2 capture from natural gas combined cycles: Comparison of internal and external reforming , 2013 .

[13]  Wenji Zhou,et al.  Uncertainty modeling of CCS investment strategy in China’s power sector , 2010 .

[14]  Xi Jiang,et al.  A review of physical modelling and numerical simulation of long-term geological storage of CO2 , 2011 .

[15]  J. Xiang,et al.  A kinetic study of NO formation during oxy-fuel combustion of pyridine , 2012 .

[16]  Jung-Yeul Jung,et al.  CO2 transport strategy and its cost estimation for the offshore CCS in Korea , 2013 .

[17]  M. Mercedes Maroto-Valer,et al.  Waste materials for carbon capture and storage by mineralisation (CCSM) – A UK perspective , 2012 .

[18]  Melissa L. Holtmeyer,et al.  Effects of biomass particle size during cofiring under air-fired and oxyfuel conditions , 2012 .

[19]  Shawn Litster,et al.  Exergy and economic analyses of advanced IGCC–CCS and IGFC–CCS power plants , 2013 .

[20]  Xiaosong Zhang,et al.  Learning rates and future cost curves for fossil fuel energy systems with CO2 capture: Methodology and case studies , 2012 .

[21]  Hailong Li,et al.  Impurity impacts on the purification process in oxy-fuel combustion based CO2 capture and storage system , 2009 .

[22]  Ta-Hui Lin,et al.  Oxy-oil combustion characteristics of an existing furnace , 2013 .

[23]  Y. Duan,et al.  Development of amino acid and amino acid-complex based solid sorbents for CO2 capture , 2013 .

[24]  Rahul Anantharaman,et al.  Pursuing the pre-combustion CCS route in oil refineries – The impact on fired heaters , 2013 .

[25]  Jinyue Yan,et al.  Impacts of equations of state (EOS) and impurities on the volume calculation of CO2 mixtures in the applications of CO2 capture and storage (CCS) processes , 2009 .

[26]  Hailong Li,et al.  PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models , 2011 .

[27]  Chunbo Wang,et al.  Characterization of ashes from a 100kWth pilot-scale circulating fluidized bed with oxy-fuel combustion , 2011 .

[28]  E. Dahlquist,et al.  Experimental studies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fiber membrane contactor , 2012 .

[29]  Amit Kumar,et al.  Techno-economic assessment of hydrogen production from underground coal gasification (UCG) in Western Canada with carbon capture and sequestration (CCS) for upgrading bitumen from oil sands , 2013 .

[30]  Jinyue Yan,et al.  Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption , 2013 .

[31]  Tong Seop Kim,et al.  An integrated power generation system combining solid oxide fuel cell and oxy-fuel combustion for high performance and CO2 capture , 2011 .

[32]  Guoying Zhao,et al.  Carbon dioxide adsorption on mesoporous silica surfaces containing amine-like motifs , 2010 .

[33]  Jean-Xavier Morin,et al.  Hydrodynamic viability of chemical looping processes by means of cold flow model investigation , 2012 .

[34]  Hartmut Spliethoff,et al.  Assessment of oxy-fuel, pre- and post-combustion-based carbon capture for future IGCC plants , 2012 .

[35]  Alexandre Szklo,et al.  Integrated gasification combined cycle and carbon capture: A risky option to mitigate CO2 emissions of coal-fired power plants , 2011 .

[36]  Ashok Rao,et al.  Performance and costs of advanced sustainable central power plants with CCS and H2 co-production , 2012 .

[37]  Truls Gundersen,et al.  A liquefied energy chain for transport and utilization of natural gas for power production with CO2 capture and storage – Part 1 , 2009 .

[38]  Jia Li,et al.  Perceptions of opinion leaders towards CCS demonstration projects in China , 2011 .

[39]  Wei-Hsin Chen,et al.  Numerical prediction of CO2 capture process by a single droplet in alkaline spray , 2013 .

[40]  Qinhui Wang,et al.  H2 rich gas production via pressurized fluidized bed gasification of sawdust with in situ CO2 capture , 2013 .

[41]  Anders Lyngfelt,et al.  The 3rd International Conference on Chemical Looping 2014 , 2014 .

[42]  Xun Li,et al.  Peak and off-peak operations of the air separation unit in oxy-coal combustion power generation systems , 2013 .

[43]  Ronald W. Breault,et al.  Parametric behavior of a CO2 capture process: CFD simulation of solid-sorbent CO2 absorption in a riser reactor , 2013 .

[44]  Jose Manuel Valverde,et al.  Constant rate thermal analysis for enhancing the long-term CO2 capture of CaO at Ca-looping conditions , 2013 .

[45]  E. J. Anthony,et al.  A study on the activity of CaO-based sorbents for capturing CO2 in clean energy processes , 2010 .

[46]  Cristina Botero,et al.  Impact of finite-rate kinetics on carbon conversion in a high-pressure, single-stage entrained flow gasifier with coal–CO2 slurry feed , 2013 .

[47]  Hailong Li,et al.  Responses to ‘Comments on PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models’ , 2012 .

[48]  Hailong Li,et al.  Evaluating cubic equations of state for calculation of vapor–liquid equilibrium of CO2 and CO2-mixtures for CO2 capture and storage processes , 2009 .

[49]  Ron Zevenhoven,et al.  Performance assessment of producing Mg(OH)2 for CO2 mineral sequestration , 2013 .

[50]  Stefano Consonni,et al.  Shell coal IGCCS with carbon capture: Conventional gas quench vs. innovative configurations , 2011 .

[51]  Carl-Johan Fogelholm,et al.  Fixation of carbon dioxide by producing hydromagnesite from serpentinite , 2009 .

[52]  Jung-Ho Wee,et al.  A review on carbon dioxide capture and storage technology using coal fly ash , 2013 .

[53]  Changsui Zhao,et al.  Calcium-based sorbent doped with attapulgite for CO2 capture , 2013 .

[54]  Shao Yingjuan,et al.  Predictions of the impurities in the CO2 stream of an oxy-coal combustion plant , 2010 .

[55]  K. Schoots,et al.  The Cost of Pipelining Climate Change Mitigation: An Overview of the Economics of CH4, CO2 and H2 Transportation , 2010 .

[56]  Edward J. Anthony,et al.  Experiences and results on a 0.8MWth oxy-fuel operation pilot-scale circulating fluidized bed , 2012 .

[57]  E. J. Anthony,et al.  The effect of SO2 on CO2 capture by CaO-based pellets prepared with a kaolin derived Al(OH)3 binder , 2012 .

[58]  Richard S. Middleton,et al.  The complex future of CO2 capture and storage: Variable electricity generation and fossil fuel power , 2013 .

[59]  R. Castillo,et al.  Thermodynamic analysis of a hard coal oxyfuel power plant with high temperature three-end membrane for air separation , 2011 .

[60]  Truls Gundersen,et al.  A liquefied energy chain for transport and utilization of natural gas for power production with CO2 capture and storage - Part 2: The offshore and the onshore processes , 2009 .

[61]  M. Procesi,et al.  Strategic use of the underground in an energy mix plan: Synergies among CO2, CH4 geological storage and geothermal energy. Latium Region case study (Central Italy) , 2013 .

[62]  Wei Hsin Chen,et al.  One-step synthesis of dimethyl ether from the gas mixture containing CO2 with high space velocity , 2012 .

[63]  Yi-Ming Wei,et al.  Estimating risk for the carbon market via extreme value theory: An empirical analysis of the EU ETS , 2012 .

[64]  Erik Dahlquist,et al.  Effects of SO2 on CO2 capture using a hollow fiber membrane contactor , 2013 .

[65]  Francesca Ferrara,et al.  Techno-economic comparison between different technologies for a CCS power generation plant integrated with a sub-bituminous coal mine in Italy , 2012 .

[66]  M. Nemitallah,et al.  Experimental and numerical investigations of an atmospheric diffusion oxy-combustion flame in a gas turbine model combustor , 2013 .

[67]  Olav Bolland,et al.  Design criteria and optimization of heat recovery steam cycles for integrated reforming combined cycles with CO2 capture , 2012 .

[68]  Tong Seop Kim,et al.  Performance evaluation of integrated gasification solid oxide fuel cell/gas turbine systems including carbon dioxide capture , 2011 .

[69]  Giovanni Lozza,et al.  Thermodynamic analysis of air-blown gasification for IGCC applications , 2011 .

[70]  Defu Che,et al.  Pyrolysis and combustion characteristics of coals in oxyfuel combustion , 2012 .

[71]  Guohe Huang,et al.  A two-stage inexact-stochastic programming model for planning carbon dioxide emission trading under uncertainty , 2010 .

[72]  Wei-Hsin Chen,et al.  A theoretical analysis of the capture of greenhouse gases by single water droplet at atmospheric and elevated pressures , 2011 .

[73]  Mohamed Pourkashanian,et al.  CFD modeling of oxy-coal combustion: Prediction of burnout, volatile and NO precursors release , 2013 .

[74]  Rémi Tsiava,et al.  Two-dimensional flame temperature and emissivity measurements of pulverized oxy-coal flames , 2012 .

[75]  Truls Gundersen,et al.  A liquefied energy chain for transport and utilization of natural gas for power production with CO2 capture and storage – Part 3: The combined carrier and onshore storage , 2009 .

[76]  Alexandre Szklo,et al.  Designing learning curves for carbon capture based on chemical absorption according to the minimum work of separation , 2013 .

[77]  Urmila M. Diwekar,et al.  Optimal sensor placement in integrated gasification combined cycle power systems , 2012 .

[78]  Reinhard Madlener,et al.  Economic Evaluation of IGCC Plants with Hot Gas Cleaning , 2010 .

[79]  Hartmut Spliethoff,et al.  IGCC–EPI: Decentralized concept of a highly load-flexible IGCC power plant for excess power integration , 2013 .

[80]  Mohsen Assadi,et al.  An EU initiative for future generation of IGCC power plants using hydrogen-rich syngas: Simulation results for the baseline configuration , 2012 .

[81]  M. V. Gil,et al.  Oxy-fuel combustion kinetics and morphology of coal chars obtained in N2 and CO2 atmospheres in an entrained flow reactor , 2012 .

[82]  M. Procesi,et al.  Synergic and conflicting issues in planning underground use to produce energy in densely populated countries, as Italy Geological storage of CO2, natural gas, geothermics and nuclear waste disposal , 2013 .

[83]  Kazuya Goto,et al.  A review of efficiency penalty in a coal-fired power plant with post-combustion CO2 capture , 2013 .

[84]  Yutaka Kitamura,et al.  Evaluation of Stirling cooler system for cryogenic CO2 capture , 2012 .

[85]  Ali Abbas,et al.  Potential for solar-assisted post-combustion carbon capture in Australia , 2013 .

[86]  Lei Zhu,et al.  A real options–based CCS investment evaluation model: Case study of China’s power generation sector , 2011 .

[87]  Hailong Li,et al.  Techno-economic evaluation of the evaporative gas turbine cycle with different CO2 capture options , 2012 .

[88]  Giovanni Lozza,et al.  Amine-based post-combustion CO2 capture in air-blown IGCC systems with cold and hot gas clean-up , 2013 .

[89]  R. Privat,et al.  Comments on “PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models” , 2012 .

[90]  Yongping Yang,et al.  Performance analysis of a near zero CO2 emission solar hybrid power generation system , 2013 .

[91]  X. Bai,et al.  Characteristics of oxy-fuel combustion in gas turbines , 2012 .

[92]  Dong Wang,et al.  Incorporating IGCC and CaO sorption-enhanced process for power generation with CO2 capture , 2012 .

[93]  Zhong-yang Luo,et al.  Regeneration performance of CO2-rich solvents by using membrane vacuum regeneration technology: Relationships between absorbent structure and regeneration efficiency , 2012 .

[94]  Nikolett Sipöcz,et al.  The use of Artificial Neural Network models for CO2 capture plants , 2011 .

[95]  Xiaoping Chen,et al.  Investigation on water vapor effect on direct sulfation during wet-recycle oxy-coal combustion , 2013 .

[96]  Ruifeng Dong,et al.  A feasible process for simultaneous removal of CO2, SO2 and NOx in the cement industry by NH3 scrubbing , 2012 .

[97]  Nilay Shah,et al.  Solar-assisted Post-combustion Carbon Capture feasibility study , 2012 .

[98]  T. Gundersen,et al.  A liquefied energy chain for transport and utilization of natural gas for power production with CO2 capture and storage - Part 4: Sensitivity analysis of transport pressures and benchmarking with conventional technology for gas transport , 2009 .

[99]  Yingjie Li,et al.  CO2 capture performance of calcium-based sorbent doped with manganese salts during calcium looping cycle , 2012 .

[101]  Jinyue Yan,et al.  Effects of flue gas recycle on oxy-coal power generation systems , 2012 .

[102]  Jinyue Yan,et al.  Carbon capture with low energy penalty: Supplementary fired natural gas combined cycles , 2012 .

[103]  Mei Sun,et al.  The impacts of carbon tax on energy intensity and economic growth – A dynamic evolution analysis on the case of China , 2013 .

[104]  Wei Hsin Chen,et al.  Influence of droplet mutual interaction on carbon dioxide capture process in sprays , 2012 .

[105]  Jeehoon Han,et al.  A multi-objective optimization model for sustainable electricity generation and CO2 mitigation (EGCM) infrastructure design considering economic profit and financial risk , 2012 .

[106]  Bin Huang,et al.  Industrial test and techno-economic analysis of CO2 capture in Huaneng Beijing coal-fired power station , 2010 .

[107]  Dermot J. Roddy,et al.  Development of a CO2 network for industrial emissions , 2012 .

[108]  Peter Viebahn,et al.  Integrated assessment of carbon capture and storage (CCS) in the German power sector and comparison with the deployment of renewable energies , 2012 .

[109]  Lei Zhu,et al.  What’s the most cost-effective policy of CO2 targeted reduction: An application of aggregated economic technological model with CCS? , 2013 .

[110]  Gonzalo Guillén-Gosálbez,et al.  Multi-objective optimization of coal-fired electricity production with CO2 capture , 2012 .

[111]  L. Bergström,et al.  Colloidal processing and CO2 capture performance of sacrificially templated zeolite monoliths , 2012 .

[112]  Douglas Probert,et al.  Monte-Carlo simulation of investment integrity and value for power-plants with carbon-capture , 2012 .

[113]  Hanne M. Kvamsdal,et al.  Integrating a full carbon capture scheme onto a 450 MWe NGCC electric power generation hub for offshore operations: Presenting the Sevan GTW concept , 2009 .