Simulating flow in rock joints using a particulate interface model of a discrete element method

[1]  M. Weng,et al.  DEM simulation of planar sliding using a particulate interface model considering velocity-dependent friction , 2019, Computers and Geotechnics.

[2]  J. Santamarina,et al.  An implicit joint-continuum model for the hydro-mechanical analysis of fractured rock masses , 2019, International Journal of Rock Mechanics and Mining Sciences.

[3]  R. Wan,et al.  Numerical modeling of fracturing in permeable rocks via a micromechanical continuum model , 2019, International Journal for Numerical and Analytical Methods in Geomechanics.

[4]  M. Weng,et al.  Simulating interface characteristics by using a particulate interface model of a discrete element method , 2019, Computers and Geotechnics.

[5]  J. Tejchman,et al.  Simulations of hydro-fracking in rock mass at meso-scale using fully coupled DEM/CFD approach , 2019, Acta Geotechnica.

[6]  Hari S. Viswanathan,et al.  Simulation of discrete cracks driven by nearly incompressible fluid via 2D combined finite‐discrete element method , 2019, International Journal for Numerical and Analytical Methods in Geomechanics.

[7]  A. Lucas,et al.  Empirical investigation of friction weakening of terrestrial and Martian landslides using discrete element models , 2019, Landslides.

[8]  Wei Wu,et al.  DEM modeling of hydraulic fracturing in permeable rock: influence of viscosity, injection rate and in situ states , 2018 .

[9]  Pinnaduwa Kulatilake,et al.  Improvements for the smooth joint contact model of the particle flow code and its applications , 2017 .

[10]  Meng-Chia Weng,et al.  Modeling scale effects on consequent slope deformation by centrifuge model tests and the discrete elementmethod , 2017, Landslides.

[11]  Hung-Hui Li,et al.  Kinematic model of a translational slide in the Cidu section of the Formosan Freeway , 2016, Landslides.

[12]  Tsan-Hwei Huang,et al.  Determining transmissivity of fracture sets with statistical significance using single-borehole hydraulic tests: Methodology and implementation at Heshe well site in central Taiwan , 2015 .

[13]  Jeoung Seok Yoon,et al.  Numerical investigation on optimized stimulation of intact and naturally fractured deep geothermal reservoirs using hydro-mechanical coupled discrete particles joints model , 2014 .

[14]  C. Lambert,et al.  Discrete modeling of rock joints with a smooth-joint contact model , 2014 .

[15]  A. Zang,et al.  Particle Based Discrete Element Modeling of Hydraulic Stimulation of Geothermal Reservoirs, Induced Seismicity and Fault Zone Deformation , 2013 .

[16]  Jyr‐Ching Hu,et al.  A kinematic model of the Hsiaolin landslide calibrated to the morphology of the landslide deposit , 2011 .

[17]  D. Billaux,et al.  Fractal model for permeability calculation from porosity and pore radius information and application to excavation damaged zones surrounding waste emplacement boreholes in opalinus clay , 2010 .

[18]  Jyr-Ching Hu,et al.  The Tsaoling landslide triggered by the Chi-Chi earthquake, Taiwan: Insights from a discrete element simulation , 2009 .

[19]  J. Kozicki,et al.  A new open-source software developed for numerical simulations using discrete modeling methods , 2008 .

[20]  Yoshiyuki Shimizu,et al.  Three-dimensional simulation using fixed coarse-grid thermal-fluid scheme and conduction heat transfer scheme in distinct element method , 2006 .

[21]  Gudmundur S. Bodvarsson,et al.  Hydraulic conductivity of rock fractures , 1996 .

[22]  Jeoung Seok Yoon,et al.  Discrete Element Modelling of Hydraulic Fracture Propagation and Dynamic Interaction with Natural Fractures in Hard Rock , 2017 .

[23]  Nick Barton,et al.  Review of a new shear-strength criterion for rock joints , 1973 .