Analysis, design and application of a capacitance measurement circuit with wide operating frequency range

A novel high frequency, low cost circuit for measuring capacitance is proposed in this paper. This new capacitance measuring circuit is able to measure small coupling capacitance variations with high stray-immunity. Hence, it could be used in many potential applications such as measuring a metal fill time in the lost foam casting (LFC) process and electrical capacitive tomography (ECT) system. The proposed circuit is based on differential charging/discharging method using current feedback amplifier and a synchronous demodulation stage. The circuit has a wide high frequency operating range with zero phase shift; hence multiple circuits can work at different frequencies simultaneously to measure the capacitance. The non-ideal characteristics of the circuit has been analyzed and verified through LTSpice simulation. Results from the tests on a prototype and a simulation elucidate the practicality of the proposed circuit.

[1]  Richard C. Lanza,et al.  High-energy X-ray computed tomography of the progression of the solidification front in pure aluminum , 1999 .

[2]  Maurice Beck,et al.  Design of sensor electronics for electrical capacitance tomography , 1992 .

[3]  Wuqiang Yang,et al.  Hardware design of electrical capacitance tomography systems , 1996 .

[4]  S P Willig.  Operational amplifiers. , 1993, Biomedical instrumentation & technology.

[5]  T. Fabian,et al.  A robust capacitive angular speed sensor , 1997, IEEE Instrumentation and Measurement Technology Conference Sensing, Processing, Networking. IMTC Proceedings.

[6]  T. A. York,et al.  An AC-based capacitance measuring circuit for tomography systems and its silicon chip design , 1995 .

[7]  Xiujun Li,et al.  A New Method for the Measurement of Low Speed Using a Multiple-Electrode Capacitive Sensor , 1998 .

[8]  Gerard C. M. Meijer,et al.  A novel low-cost capacitive-sensor interface , 1996 .

[9]  Xianjun Li,et al.  A new method for the measurement of very low speeds using a multiple-electrode capacitive sensor , 1996 .

[10]  Wuqiang Yang,et al.  Electrical Capacitance Tomography — from Design to Applications , 1995 .

[11]  Tibor Fabian,et al.  A robust capacitive angular speed sensor , 1998, IEEE Trans. Instrum. Meas..

[12]  Wuqiang Yang,et al.  New AC-based capacitance tomography system , 1999 .

[13]  H. U. Meyer,et al.  An integrated capacitive position sensor , 1995, Proceedings of 1995 IEEE Instrumentation and Measurement Technology Conference - IMTC '95.

[14]  P.K. Rajan,et al.  Characterization of Capacitive Sensors and Monitoring of Metal Fill in Lost Foam Casting , 2007, 2007 Thirty-Ninth Southeastern Symposium on System Theory.

[15]  Mohamed Abdelrahman,et al.  Monitoring metal-fill in a lost foam casting process. , 2006, ISA transactions.