Fullerene-Dependent Miscibility in the Silole-Containing Copolymer PSBTBT-08

A high fullerene molecular miscibility of over 40 wt % is found in the copolymer poly((4,4-octyldithieno(3,2-b:2′,3′-d)silole)-2,6-diyl-alt-(2,1,3-benzothiadiazole)-4,7-diyl) (PSBTBT-08)—a member of the PSBTBT low-bandgap polymer family that have produced power conversion efficiencies as high as 5.9% in solar cells. This observation suggests molecular miscibility plays a key role in the photovoltaic effect in this system. The level of miscibility is additionally measured to be highly dependent on the fullerene species with significant differences between C60- and C70-based fullerenes, highlighting a new parameter to be monitored and controlled when considering different fullerene moieties and species in organic solar cells. Surprisingly, a wide-angle X-ray scattering study reveals no significant crystallinity in the PSBTBT with octyl side chains, potentially the cause of low mobilities and in stark contrast to dodecyl and ethylhexyl PSBTBTs, which demonstrates the importance of the side chain in device mo...

[1]  J Kirz,et al.  Chemical contrast in X-ray microscopy and spatially resolved XANES spectroscopy of organic specimens. , 1992, Science.

[2]  T. Warwick,et al.  A new bend-magnet beamline for scanning transmission X-ray microscopy at the Advanced Light Source. , 2002, Journal of synchrotron radiation.

[3]  Christoph J. Brabec,et al.  Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors , 2002 .

[4]  E. Anderson,et al.  Interferometer-controlled scanning transmission X-ray microscopes at the Advanced Light Source. , 2003, Journal of synchrotron radiation.

[5]  A. Walker,et al.  Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology. , 2005, Nano letters.

[6]  A. Heeger,et al.  Molecular structure and dynamics at the interfaces within bulk heterojunction materials for solar cells. , 2006, Journal of the American Chemical Society.

[7]  Valentin D. Mihailetchi,et al.  Device Physics of Polymer:Fullerene Bulk Heterojunction Solar Cells , 2007 .

[8]  Bumjoon J. Kim,et al.  The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance. , 2008, Journal of the American Chemical Society.

[9]  Junbiao Peng,et al.  High-performance polymer heterojunction solar cells of a polysilafluorene derivative , 2008 .

[10]  Yang Yang,et al.  Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole. , 2008, Journal of the American Chemical Society.

[11]  Harald Ade,et al.  Near-edge X-ray absorption fine-structure microscopy of organic and magnetic materials. , 2009, Nature materials.

[12]  Martin Egginger,et al.  Material Solubility‐Photovoltaic Performance Relationship in the Design of Novel Fullerene Derivatives for Bulk Heterojunction Solar Cells , 2009 .

[13]  M. Toney,et al.  Tuning the properties of polymer bulk heterojunction solar cells by adjusting fullerene size to control intercalation. , 2009, Nano letters.

[14]  Guillermo C Bazan,et al.  Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells. , 2009, Nature chemistry.

[15]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[16]  Gang Li,et al.  Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties. , 2009, Journal of the American Chemical Society.

[17]  K. Müllen,et al.  Tailoring structure-property relationships in dithienosilole-benzothiadiazole donor-acceptor copolymers. , 2009, Journal of the American Chemical Society.

[18]  Harald Ade,et al.  A Quantitative Study of PCBM Diffusion during Annealing of P3HT:PCBM Blend Films , 2009 .

[19]  Yang Yang,et al.  Silicon Atom Substitution Enhances Interchain Packing in a Thiophene‐Based Polymer System , 2010, Advanced materials.

[20]  Zhenan Bao,et al.  Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends , 2010 .

[21]  Howard A. Padmore,et al.  A SAXS/WAXS/GISAXS Beamline with Multilayer Monochromator , 2010 .

[22]  C. McNeill,et al.  Influence of Annealing and Interfacial Roughness on the Performance of Bilayer Donor/Acceptor Polymer Photovoltaic Devices , 2010 .

[23]  Yongfang Li,et al.  High‐Yield Synthesis and Electrochemical and Photovoltaic Properties of Indene‐C70 Bisadduct , 2010 .

[24]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[25]  M. Mackay,et al.  Nanoparticle agglomeration in polymer-based solar cells. , 2010, Physical review letters.

[26]  B. Collins,et al.  Molecular Miscibility of Polymer-Fullerene Blends , 2010 .

[27]  Wei You,et al.  Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells. , 2011, Journal of the American Chemical Society.

[28]  David S. Germack,et al.  Influence of substrate on crystallization in polythiophene/fullerene blends ☆ , 2011 .

[29]  H. Tada,et al.  Side-chain effects on electronic structure and molecular stacking arrangement of PCBM spin-coated films , 2011 .

[30]  G. Sharma,et al.  A Simple and Effective Modification of PCBM for Use as an Electron Acceptor in Efficient Bulk Heterojunction Solar Cells , 2011 .

[31]  Craig J. Hawker,et al.  Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend , 2011 .

[32]  Yongfang Li,et al.  PBDTTTZ: A Broad Band Gap Conjugated Polymer with High Photovoltaic Performance in Polymer Solar Cells , 2011 .

[33]  Dennis Nordlund,et al.  P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology. , 2011, Nano letters.

[34]  U. Lemmer,et al.  Effect of Photovoltaic Polymer/Fullerene Blend Composition Ratio on Microstructure Evolution during Film Solidification Investigated in Real Time by X-ray Diffraction , 2011 .

[35]  M. Dadmun,et al.  A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams. , 2011, ACS nano.

[36]  F. Liu,et al.  Bulk heterojunction photovoltaic active layers via bilayer interdiffusion. , 2011, Nano letters.