An Overview of Sputtering Hydroxyapatite for BiomedicalApplication

Materials such as biocompatible metals, ceramics, composites, and polymers are used in the fabrication of biomedical implants which are used in the human body especially for the replacement of hard tissues. However, they degrade with time since they are subjected to different mechanical conditions and long-term exposure to fluids corrosion. Therefore, to curb these limitations, the surface properties are usually coated with thin metallic and nonmetallic materials. One such nonmetal is Hydroxyapatite (HA) coating which has the potential of mitigating these shortcomings and it is a biocompatible and bioactive material. This paper provides an overview of the existing literature on the sputtering of hydroxyapatite coating for biomedical applications with emphasis on the deposition conditions and parameters.

[1]  R. Yimnirun,et al.  X-ray absorption study of the local structure of Mg in hydroxyapatites thin films deposited by RF magnetron Co-Sputtering , 2020 .

[2]  T. Fang,et al.  The fabrication and characteristics of hydroxyapatite film grown on titanium alloy Ti-6Al-4V by anodic treatment , 2020 .

[3]  F. Bolívar,et al.  Effect of deposition temperature and target-substrate distance on the structure, phases, mechanical and tribological properties of multi-layer HA-Ag coatings obtained by RF magnetron sputtering , 2019, Surface and Coatings Technology.

[4]  G. Neves,et al.  A brief review on hydroxyapatite production and use in biomedicine , 2019, Cerâmica.

[5]  O. P. Oladijo,et al.  Overview of thin film deposition techniques , 2019, AIMS Materials Science.

[6]  F. Bolívar,et al.  Effect of thermal treatment on structure, phase and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering , 2019, Thin Solid Films.

[7]  M. Surmeneva,et al.  Bone marrow derived mesenchymal stem cell response to the RF magnetron sputter deposited hydroxyapatite coating on AZ91 magnesium alloy , 2019, Materials Chemistry and Physics.

[8]  O. P. Oladijo,et al.  Properties of physically deposited thin aluminium film coatings: A review , 2018 .

[9]  Pamu Dobbidi,et al.  Effect of thickness on optical and microwave dielectric properties of Hydroxyapatite films deposited by RF magnetron sputtering , 2018 .

[10]  M. Surmeneva,et al.  RF magnetron sputtering of a hydroxyapatite target: A comparison study on polytetrafluorethylene and titanium substrates , 2017 .

[11]  K. Gross,et al.  RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications , 2017, Bioactive materials.

[12]  M. Morris,et al.  Mechanical properties and biocompatibility of the sputtered Ti doped hydroxyapatite. , 2016, Journal of the mechanical behavior of biomedical materials.

[13]  A. Kiss,et al.  Effect of the deposition temperature on corrosion resistance and biocompatibility of the hydroxyapatite coatings , 2015 .

[14]  O. Ivasishin,et al.  Biomimetic Hydroxyapatite Growth on Functionalized Surfaces of Ti-6Al-4V and Ti-Zr-Nb Alloys , 2015, Nanoscale Research Letters.

[15]  M. Surmeneva,et al.  Effect of silicate doping on the structure and mechanical properties of thin nanostructured RF magnetron sputter-deposited hydroxyapatite films , 2015 .

[16]  H. Choe,et al.  Hydroxyapatite formation on biomedical Ti–Ta–Zr alloys by magnetron sputtering and electrochemical deposition , 2014 .

[17]  M. Toparli,et al.  Enhancement of the mechanical properties of hydroxyapatite by SiC addition. , 2014, Journal of the mechanical behavior of biomedical materials.

[18]  M. Surmeneva,et al.  Fabrication, ultra-structure characterization and in vitro studies of RF magnetron sputter deposited nano-hydroxyapatite thin films for biomedical applications , 2014 .

[19]  A. N. Khan,et al.  Dip Coating of Nano Hydroxyapatite on Titanium Alloy with Plasma Assisted γ -Alumina Buffer Layer: A Novel Coating Approach , 2013 .

[20]  Ashok Kumar,et al.  Biomaterials and bioengineering tomorrow’s healthcare , 2013, Biomatter.

[21]  M. Surmeneva,et al.  The structure of an RF-magnetron sputter-deposited silicate-containing hydroxyapatite-based coating investigated by high-resolution techniques , 2013 .

[22]  H. Choe,et al.  Surface characteristics of hydroxyapatite/titanium composite layer on the Ti-35Ta-xZr surface by RF and DC sputtering , 2011 .

[23]  Emre Özyilmaz,et al.  The evaluation of the effects of surface treatments on different dental ceramic structures , 2011 .

[24]  Manoj Komath,et al.  Pulsed laser deposition of hydroxyapatite on titanium substrate with titania interlayer , 2011, Journal of materials science. Materials in medicine.

[25]  N. Dahotre,et al.  Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies , 2009 .

[26]  A. Kobayashi,et al.  Effect of gun current on the microstructure and crystallinity of plasma sprayed hydroxyapatite coatings , 2007 .

[27]  I. Zhitomirsky,et al.  Electrophoretic deposition of composite hydroxyapatite–silica–chitosan coatings , 2007 .

[28]  J. Weng,et al.  Formation and characteristics of the apatite layer on plasma-sprayed hydroxyapatite coatings in simulated body fluid. , 1997, Biomaterials.

[29]  K. Khor,et al.  Thermal spraying of hydroxyapatite (HA) coatings: Effects of powder feedstock , 1995 .

[30]  M. Yoshinari,et al.  Thin hydroxyapatite coating produced by the ion beam dynamic mixing method. , 1994, Biomaterials.

[31]  E. Zalnezhad,et al.  Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper , 2014 .

[32]  D. Kong,et al.  Mechanical properties of hydroxyapatite-zirconia coatings prepared by magnetron sputtering , 2012 .