Thermal analysis of QFN packages using finite element method

The QFN (quad flat non-leaded) package is a new type of chip scale package. In this study, both the FEM solid model and CFD model of QFN package were generated to predict the junction-to-ambient thermal resistance of the package under natural and forced convection. The solid model uses flat plate surface convection correlations to simulate the package and board cooling. The CFD model uses computational fluid dynamics software to simulate surface convective loads. In comparison with experimental measurements, the results show that the CFD model is more accurate than the solid model to predict the thermal resistance of the package. The convection heat transfer coefficients obtained from CFD model were also applied to the surface correlations of FEM solid model. It shows that the accuracy of simulation results by FEM solid model can be improved with the surface convection correlations of CFD results. Furthermore, the distribution of heat transfer over external faces of the package is calculated. The results show that most of the heat is dissipated to the board through the bottom surface of the lead frame.

[2]  H. I. Rosten,et al.  Development, validation and application of a thermal model of a plastic quad flat pack , 1995, 1995 Proceedings. 45th Electronic Components and Technology Conference.

[3]  A.C.W. Lu,et al.  Electrical and thermal modelling of QFN packages , 2000, Proceedings of 3rd Electronics Packaging Technology Conference (EPTC 2000) (Cat. No.00EX456).

[4]  Vincent P. Manno,et al.  Achieving accurate thermal characterization using a CFD code: a case study of PLCC packages , 1995, Proceedings of 1995 IEEE/CPMT 11th Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

[5]  Eric Cho,et al.  Thermal characterization of cavity-down TBGA package with Flotherm simulation , 2000, Sixteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.00CH37068).

[6]  J. Lau,et al.  Cooling assessment and distribution of heat dissipation of a cavity down plastic ball grid array package - NuBGA , 1997 .

[7]  J. Lau,et al.  Thermal and Mechanical Evaluations of a Cost-Effective Plastic Ball Grid Array Package , 1997 .