Characterisation of Laser System Power Draws in Materials Processing

Due to their high speed and versatility, laser processing systems are now commonplace in many industrial production lines. However, as the need to reduce the environmental impact from the manufacturing industry becomes more urgent, there is the opportunity to evaluate laser processing systems to identify opportunities to improve energy efficiencies and thus reduce their carbon footprint. While other researchers have studied laser processing, the majority of previous work on laser systems has focused on the beam–material interaction, overlooking the whole system viewpoint and the significance of support equipment. In this work, a methodical approach is taken to design a set of energy modelling terminologies and develop a structured power metering system for laser systems. A 300 W fibre laser welding system is used to demonstrate the application of the power characterization system by utilizing a purpose-built power meter. The laser is broken down according to sub-system, with each part analysed separately to give a complete overall power analysis, including all auxiliary units. The results show that the greatest opportunities for efficiency improvements lie in the auxiliary units that support the laser devices as these were responsible for a majority of the electrical draw; 63.1% when the laser was operated at 240 W, and increasing as the beam power reduced. The remaining power draw was largely apportioned to electrical supply inefficiencies. In this work, the laser device delivered a maximum of 6% of the total system power. The implications of these results on laser processing system design are then discussed as is the suitability of the characterization process for use by industry on a range of specific laser processing systems.

[1]  Carlos Rodrigues Rocha,et al.  A novel method for analysis and optimization of electric energy consumption in manufacturing processes , 2018 .

[2]  Paul W. Griffin,et al.  Industrial energy use and carbon emissions reduction: a UK perspective , 2016 .

[3]  John R. Tyrer,et al.  Laser weld pool management through diffractive holographic optics , 2012 .

[4]  David L. Bourell,et al.  Sustainability of additive manufacturing: measuring the energy consumption of the laser sintering process , 2011 .

[5]  Renaldi Renaldi,et al.  Environmental impact modeling of selective laser sintering processes , 2014 .

[6]  Geoffrey P. Hammond,et al.  Enabling technologies for industrial energy demand management , 2008 .

[7]  Richard J.M. Hague,et al.  The cost of additive manufacturing: machine productivity, economies of scale and technology-push , 2016 .

[8]  Shahin Rahimifard,et al.  A 'design for energy minimization' approach to reduce energy consumption during the manufacturing phase , 2016 .

[9]  Wim Dewulf,et al.  Energy and Resource Efficiency of Laser Cutting Processes , 2014 .

[10]  Sami Kara,et al.  Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .

[11]  John R. Tyrer,et al.  The use of laser induced processing fume as a process measurand in the feedback control of laser cutting , 2003 .

[12]  Elliot Woolley,et al.  Complex beam profiles for laser annealing of thin-film CdTe photovoltaics , 2018, Journal of Laser Applications.

[13]  Ratnadeep Paul,et al.  Process energy analysis and optimization in selective laser sintering , 2012 .

[14]  John R. Tyrer,et al.  Grain Size Control in the Weld Pool and Heat Affected Zone Using Holograms , 2012 .

[15]  Pavel Penchev,et al.  University of Birmingham Generic integration tools for reconfigurable laser micromachining systems , 2015 .

[16]  Lin Li,et al.  Advances in macro-scale laser processing , 2018 .

[17]  J. B. O'Hagan.  Safety aspects of laser displays , 1997 .

[18]  Jing Liang,et al.  Variable beam intensity profile shaping for layer uniformity control in laser hardening applications , 2014 .

[19]  Manoj Kumar Tiwari,et al.  Modeling, analysis, and improvement of integrated productivity and energy consumption in a serial manufacturing system. , 2018 .

[20]  Juan Pou,et al.  Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers , 2014 .

[21]  Wim Dewulf,et al.  Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) Part 1: Methodology Description , 2011 .

[22]  I. R. Pashby,et al.  Deposition of Ti–6Al–4V using a high power diode laser and wire, Part I: Investigation on the process characteristics , 2008 .

[23]  John R. Tyrer,et al.  The use of holographic optical elements (HOE's) to investigate the use of a flat irradiance profile in the control of heat absorption in wire-fed laser cladding , 2015 .

[24]  Friedrich G. Bachmann,et al.  Industrial applications of high power diode lasers in materials processing , 2003 .

[25]  Shahin Rahimifard,et al.  A framework for modelling energy consumption within manufacturing systems , 2011 .

[26]  Shahin Rahimifard,et al.  Minimising Embodied Product Energy to support energy efficient manufacturing , 2010 .