Four novel alkyl 2-cyanoacylate monomers and their use in latent fingermark detection by mid-infrared spectral imaging.

Four novel alkyl 2-cyanoacrylate monomers (alkyl=1-cyanoethyl, 2-cyanoethyl, trideuteromethyl and pentadeuteroethyl) have been tested for their ability to develop latent fingermarks that can then be visualized using mid-infrared spectral (chemical) imaging. Each of the four monomers was chosen for its potential to produce a strong, isolated infrared spectral band in its corresponding polymer (to provide spectral contrast against most backgrounds), as well as for its potential ability to be fumed onto fingermarks in the manner of conventional ethyl 2-cyanoacrylate (superglue). With the exception of the 2-cyanoethyl 2-cyanoacrylate, which had to be fumed under reduced pressure, all of the monomers were found to be sufficiently volatile to be fumed in a conventional fuming cabinet. All four monomers polymerized selectively on fingermark ridges on a variety of non-porous and semi-porous surfaces, leading to excellent development of the fingermarks. Unfortunately, although high quality mid-infrared spectral images of the fingermarks could be formed for all of the polymers at various frequencies, the new CN or CD stretching vibrations did not give rise to strong enough absorption intensities for good contrast on difficult backgrounds such as polymer banknotes. However, in the 1-cyanoethyl 2-cyanoacrylate polymer, the presence of the additional nitrile group had the unintended but desirable effect of shifting the strong CO absorption to higher frequencies, moving it away from interfering banknote absorptions. This enabled fingermark contrast to be achieved even against the intaglio printing on the banknotes.

[1]  R. M. Hooper,et al.  The use of near-infrared spectroscopy for the cure monitoring of an ethyl cyanoacrylate adhesive , 2006 .

[2]  C. Ricci,et al.  Chemical Imaging of Latent Fingerprint Residues , 2007, Applied spectroscopy.

[3]  Yong‐Cheng Ning,et al.  Interpretation of Infrared Spectra , 2011 .

[4]  Masamichi Kobayashi,et al.  Normal Vibrations of the Polymer Molecules of Helical Configuration. III. Polyoxymethylene and Polyoxymethylene‐d2 , 1963 .

[5]  Camilla Ricci,et al.  Spectroscopic imaging of latent fingermarks collected with the aid of a gelatin tape. , 2007, Analytical chemistry.

[6]  Kimberly Ryan,et al.  Minnesota Mining and Manufacturing Co. , 1993 .

[7]  B. Reedy,et al.  Synthesis and characterization of four alkyl 2‐cyanoacrylate monomers and their precursors for use in latent fingerprint detection , 2011 .

[8]  C. Lennard,et al.  The detection and enhancement of latent fingermarks using infrared chemical imaging. , 2005, Journal of forensic sciences.

[9]  L. Ley,et al.  Infrared spectroscopy of C–D vibrational modes on diamond (100) surfaces , 1999 .

[10]  H. Edwards,et al.  Anomalies in polycyanoacrylate formation studied by Raman spectroscopy: Implications for the forensic enhancement of latent fingerprints for spectral analysis , 2006 .

[11]  H. Edwards,et al.  Fourier transform Raman spectroscopic studies of the curing of cyanoacrylate glue , 2004 .

[12]  Mark Tahtouh,et al.  The Application of Infrared Chemical Imaging to the Detection and Enhancement of Latent Fingerprints: Method Optimization and Further Findings , 2007, Journal of forensic sciences.

[13]  M. Doxastakis,et al.  Synthesis and properties , 1999, Journal of materials science. Materials in medicine.

[14]  D. B. Yang Direct Kinetic Measurements of Vinyl Polymerization on Metal and Silicon Surfaces Using Real-Time FT-IR Spectroscopy , 1993 .

[15]  D. B. Yang Kinetic studies of photopolymerization using real time FT‐IR spectroscopy , 1993 .

[16]  Mark Tahtouh Reagents for infrared chemical imaging of fingerprints on difficult surfaces , 2008 .

[17]  Rebecca Schwartz Perlman,et al.  Infrared Spectroscopic Imaging for Noninvasive Detection of Latent Fingerprints , 2007, Journal of forensic sciences.

[18]  R. M. Hooper,et al.  Investigation of the dual setting mechanism of a novel dental cement using infrared spectroscopy , 2007 .

[19]  V. Vijayalakshmi,et al.  Alkyl and substituted alkyl 2-cyanoacrylates. Part 1. Synthesis and properties , 1990 .

[20]  SuëtakaWataru,et al.  INFRARED SPECTRA AND ADHESION STRENGTH OF α-CYANOACRYLATE POLYMER FILMS , 1975 .

[21]  Hugh Barr,et al.  Rapid Raman microscopic imaging for potential histological screening , 2008, SPIE BiOS.

[22]  W. Suetaka Infrared Spectroscopic Investigation of Polymer Coating-Metal Substrate Interaction , 1983 .

[23]  J. Coates Interpretation of Infrared Spectra, A Practical Approach , 2006 .

[24]  S. Radhakrishnan,et al.  Dielectric monitoring of the curing process in cyanoacrylate resin , 1993 .

[25]  S. Thennarasu,et al.  Developments and applications of cyanoacrylate adhesives , 1989 .

[26]  D. P. Oxley,et al.  An adhesive study by electron tunnelling: Ethyl α-cyanoacrylate adsorbed on an oxidized aluminium surface , 1982 .