Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling

[1]  B. Liu,et al.  Anti-phase boundary energy of β series precipitates in Mg-Y-Nd system , 2021 .

[2]  Xiaolei Wu,et al.  Heterogeneous materials: a new class of materials with unprecedented mechanical properties , 2017, Heterostructured Materials.

[3]  Ya-wei Li,et al.  Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys , 2020 .

[4]  Huiyuan Wang,et al.  A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy , 2020 .

[5]  R. Ritchie,et al.  On the impact toughness of gradient-structured metals , 2020, Acta Materialia.

[6]  Y. Liu,et al.  Critical microstructures and defects in heterostructured materials and their effects on mechanical properties , 2020 .

[7]  Li Jin,et al.  The texture and its optimization in magnesium alloy , 2020 .

[8]  Bin Liu,et al.  Elastic properties of long-period stacking ordered phases in Mg–Zn–Y and Mg–Ni–Y alloys: A first-principles study , 2020 .

[9]  Zhenyu Xiao,et al.  Effects of volume fraction of fine grains on the tensile creep properties of a hot-deformed Mg-Gd-Y-Zr alloy , 2020 .

[10]  Jiangfeng Song,et al.  Latest research advances on magnesium and magnesium alloys worldwide , 2020, Journal of Magnesium and Alloys.

[11]  Changlin Yang,et al.  Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy , 2020 .

[12]  Changlin Yang,et al.  Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration , 2020 .

[13]  Q. Gu,et al.  Experimental study and thermodynamic evaluation of Mg–La–Zn system , 2020 .

[14]  R. Scattergood,et al.  Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces , 2019 .

[15]  K. Hamad,et al.  Dynamic recrystallization behavior of AZ31-0.5Ca magnesium alloy during warm rolling , 2019, Materials Science and Engineering: A.

[16]  Chunyu Li,et al.  High ductility induced by un-DRXed grains in a Mg–Zn–Mn–La–Ce alloy , 2019, Journal of Materials Science.

[17]  M. Zha,et al.  Effects of Mg17Al12 second phase particles on twinning-induced recrystallization behavior in Mg‒Al‒Zn alloys during gradient hot rolling , 2019, Journal of Materials Science & Technology.

[18]  E. Ma,et al.  Large plasticity in magnesium mediated by pyramidal dislocations , 2019, Science.

[19]  Xiaolei Wu,et al.  Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.

[20]  M. Zha,et al.  The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys , 2019, Journal of Alloys and Compounds.

[21]  F. Pan,et al.  Microstructure and mechanical properties of Mg-Gd-Y-Zn-Mn alloy sheets processed by large-strain high-efficiency rolling , 2019, Materials Science and Engineering: A.

[22]  T. P. Weihs,et al.  Dynamic Precipitation and Recrystallization in Mg-9wt.%Al During Equal-Channel Angular Extrusion: A Comparative Study to Conventional Aging , 2018, Acta Materialia.

[23]  Yujuan Wu,et al.  The role of bimodal-grained structure in strengthening tensile strength and decreasing yield asymmetry of Mg-Gd-Zn-Zr alloys , 2017, Materials Science and Engineering: A.

[24]  M. Zha,et al.  Achieving bimodal microstructure and enhanced tensile properties of Mg–9Al–1Zn alloy by tailoring deformation temperature during hard plate rolling (HPR) , 2018, Journal of Alloys and Compounds.

[25]  R. Wu,et al.  Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems , 2018, Journal of Magnesium and Alloys.

[26]  Hua-nan Liu,et al.  High strength and ductility AZ91 magnesium alloy with multi-heterogenous microstructures prepared by high-temperature ECAP and short-time aging , 2018, Materials Science and Engineering: A.

[27]  Shu-nong Jiang,et al.  Improved workability and ductility of the Mg-Gd-Y-Zn-Zr alloy via enhanced kinking and dynamic recrystallization , 2018, Journal of Alloys and Compounds.

[28]  N. Gao,et al.  Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion , 2018, Acta Materialia.

[29]  Xiaolei Wu,et al.  Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength , 2018 .

[30]  Meng Huang,et al.  Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure , 2018, Metallurgical and Materials Transactions A.

[31]  Stefanie Sandlöbes,et al.  Mechanistic origin and prediction of enhanced ductility in magnesium alloys , 2018, Science.

[32]  M. Zha,et al.  Prominent role of a high volume fraction of Mg17Al12 particles on tensile behaviors of rolled Mg–Al–Zn alloys , 2017 .

[33]  N. Gao,et al.  Microstructure and mechanical properties of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr supersaturated solid solution prepared by high pressure torsion , 2017 .

[34]  Jing Zhang,et al.  Designing Mg alloys with high ductility: Reducing the strength discrepancies between soft deformation modes and hard deformation modes , 2017 .

[35]  M. Zha,et al.  Bimodal microstructure - A feasible strategy for high-strength and ductile metallic materials , 2017 .

[36]  Song-Jeng Huang,et al.  Enhanced Damping Capacities of Mg-Ce Alloy by the Special Microstructure with Parallel Second Phase , 2017 .

[37]  Li Jin,et al.  What is going on in magnesium alloys , 2017 .

[38]  J. Robson,et al.  How magnesium accommodates local deformation incompatibility: A high-resolution digital image correlation study , 2017 .

[39]  Xiao Zhang,et al.  High strength Mg-9Al serial alloy processed by slow extrusion , 2017 .

[40]  M. Zha,et al.  Achieving fine grain structure and superplasticity in AZ91-0.4Sn magnesium alloy using short flow rolling process , 2017 .

[41]  Dingfei Zhang,et al.  The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys , 2017 .

[42]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[43]  W. Kim,et al.  Microstructure and superplasticity of the as-cast Mg–9Al–1Zn magnesium alloy after high-ratio differential speed rolling , 2016 .

[44]  Yuping Ren,et al.  Recent developments in rare-earth free wrought magnesium alloys having high strength: A review , 2016 .

[45]  N. Birbilis,et al.  Texture evolution during static recrystallization of cold-rolled magnesium alloys , 2016 .

[46]  Lei Zhang,et al.  A comparison of microstructure and mechanical properties of Mg–9Al–1Zn sheets rolled from as-cast, cast-rolling and as-extruded alloys , 2016 .

[47]  Lei Zhang,et al.  Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process , 2015, Scientific Reports.

[48]  F. Yuan,et al.  Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility , 2015, Proceedings of the National Academy of Sciences.

[49]  Sung Hyuk Park,et al.  Improved strength of Mg alloy extruded at high speed with artificial cooling , 2015 .

[50]  P. Uggowitzer,et al.  Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys , 2015 .

[51]  Huihui Yu,et al.  Formation and microstructure of shear bands during hot rolling of a Mg–6Zn–0.5Zr alloy plate with a basal texture , 2015 .

[52]  R. Bjørge,et al.  Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing , 2015 .

[53]  Dingfei Zhang,et al.  Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling , 2015 .

[54]  Dingfei Zhang,et al.  Influence of rolling speed on microstructure and mechanical properties of AZ31 Mg alloy rolled by large strain hot rolling , 2014 .

[55]  M. Mazinani,et al.  Effects of hot rolling and inter-stage annealing on the microstructure and texture evolution in a partially homogenized AZ91 magnesium alloy , 2014 .

[56]  Lei Zhang,et al.  Effect of c/a axial ratio on Schmid factors in hexagonal close-packed metals , 2013 .

[57]  Lei Zhang,et al.  Calculation of Schmid factors in magnesium: Analysis of deformation behaviors , 2012 .

[58]  Amit K. Ghosh,et al.  Microstructure and tensile behavior of a friction stir processed magnesium alloy , 2012 .

[59]  T. Ohkubo,et al.  Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys , 2009 .

[60]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[61]  M. Mabuchi,et al.  Microstructural evolution and superplasticity of rolled Mg-9Al-1Zn , 2000 .