Prominent role of high-volume fraction Mg17Al12 dynamic precipitations on multimodal microstructure formation and strength-ductility synergy of Mg–Al–Zn alloys processed by hard-plate rolling (HPR)
暂无分享,去创建一个
M. Zha | Huiyuan Wang | Zhizheng Yang | Cheng Wang | Hang Zhang | Hai-Long Jia | D. Gao | Teng Tian | Hailong Jia
[1] M. Zha,et al. Influences of the Al3Sc particle content on the evolution of bimodal grain structure and mechanical properties of Al–Mg–Sc alloys processed by hard-plate rolling , 2020 .
[2] N. Tsuji,et al. Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer , 2020 .
[3] Xiaolei Wu,et al. Ductility and strain hardening in gradient and lamellar structured materials , 2020 .
[4] Ya-wei Li,et al. Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys , 2020 .
[5] Ya-wei Li,et al. A superplastic bimodal grain-structured Mg–9Al–1Zn alloy processed by short-process hard-plate rolling , 2019 .
[6] Chunyu Li,et al. High ductility induced by un-DRXed grains in a Mg–Zn–Mn–La–Ce alloy , 2019, Journal of Materials Science.
[7] M. Zha,et al. The synergy effect of fine and coarse grains on enhanced ductility of bimodal-structured Mg alloys , 2019, Journal of Alloys and Compounds.
[8] F. Pan,et al. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Mn alloy sheets processed by large-strain high-efficiency rolling , 2019, Materials Science and Engineering: A.
[9] T. P. Weihs,et al. Dynamic Precipitation and Recrystallization in Mg-9wt.%Al During Equal-Channel Angular Extrusion: A Comparative Study to Conventional Aging , 2018, Acta Materialia.
[10] M. Jiang,et al. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion , 2018, Acta Materialia.
[11] Meng Huang,et al. Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure , 2018, Metallurgical and Materials Transactions A.
[12] M. Zha,et al. Prominent role of a high volume fraction of Mg17Al12 particles on tensile behaviors of rolled Mg–Al–Zn alloys , 2017 .
[13] M. Zha,et al. High strength and ductile high solid solution Al–Mg alloy processed by a novel hard-plate rolling route , 2017 .
[14] M. Zha,et al. Bimodal microstructure - A feasible strategy for high-strength and ductile metallic materials , 2017 .
[15] Zhang-Zhi Shi. Compound cross-grain boundary extension twin structure and its related twin variant selection in a deformed Mg alloy , 2017 .
[16] Huihui Yu,et al. The mechanism for the different effects of texture on yield strength and hardness of Mg alloys , 2017, Scientific Reports.
[17] W. M. Rainforth,et al. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1- double twins , 2017 .
[18] N. Tsuji,et al. Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures , 2017 .
[19] Dingfei Zhang,et al. The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys , 2017 .
[20] M. Jiang,et al. High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties , 2016 .
[21] I. Karaman,et al. Dynamic precipitation in Mg-3Al-1Zn alloy during different plastic deformation modes , 2016 .
[22] T. Pollock,et al. Microstructure and Texture Through Thixomolding and Thermomechanical Processing and the Role of Mg17Al12 Particles , 2016, Metallurgical and Materials Transactions A.
[23] Lei Zhang,et al. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process , 2015, Scientific Reports.
[24] R. Bjørge,et al. High ductility bulk nanostructured Al–Mg binary alloy processed by equal channel angular pressing and inter-pass annealing , 2015 .
[25] J. Jiménez,et al. Mechanical properties of ultra-fine grained AZ91 magnesium alloy processed by friction stir processing , 2015 .
[26] S. Agnew,et al. Texture enhancement during grain growth of magnesium alloy AZ31B , 2015 .
[27] R. Bjørge,et al. Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing , 2015 .
[28] G. Straffelini,et al. Extrusion behaviour of AZ91 Mg alloy produced by spark plasma sintering , 2014 .
[29] K. Lu. Making strong nanomaterials ductile with gradients , 2014, Science.
[30] M. Mazinani,et al. Effects of hot rolling and inter-stage annealing on the microstructure and texture evolution in a partially homogenized AZ91 magnesium alloy , 2014 .
[31] Y. Wan,et al. Microstructures and mechanical properties of a hot extruded Mg–4.45Zn–0.46Y–0.76Zr alloy plate , 2014 .
[32] T. Al-Samman. Modification of texture and microstructure of magnesium alloy extrusions by particle-stimulated recrystallization , 2013 .
[33] A. Zarei‐Hanzaki,et al. On the recrystallization behavior of homogenized AZ81 magnesium alloy: The effect of mechanical twins and γ precipitates , 2012 .
[34] P. Trimby,et al. Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope. , 2012, Ultramicroscopy.
[35] Chao Xu,et al. Ultra high-strength Mg–Gd–Y–Zn–Zr alloy sheets processed by large-strain hot rolling and ageing , 2012 .
[36] Q. Miao,et al. Fabrication of excellent mechanical properties AZ31 magnesium alloy sheets by conventional rolling and subsequent annealing , 2011 .
[37] K. Xia,et al. Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature , 2011 .
[38] J. Robson,et al. Particle effects on recrystallization in magnesium?manganese alloys: Particle pinning , 2011 .
[39] K. Hagihara,et al. Effect of multimodal microstructure evolution on mechanical properties of Mg–Zn–Y extruded alloy , 2011 .
[40] Shouren Wang,et al. Precipitates effect on microstructure of as-deformed and as-annealed AZ41 magnesium alloys by adding Mn and Ca , 2011 .
[41] E. Finot,et al. Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges , 2011 .
[42] K. Palanikumar,et al. Flow stress modeling of AZ91 magnesium alloys at elevated temperature , 2011 .
[43] Hongge Yan,et al. Effect of twinning and dynamic recrystallization on the high strain rate rolling process , 2010 .
[44] W. Kim,et al. Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging , 2009 .
[45] S. W. Xu,et al. Effect of Mg17Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy , 2009 .
[46] T. Ohkubo,et al. Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys , 2009 .
[47] Ho-Kyung Kim. The grain size dependence of flow stress in an ECAPed AZ31 Mg alloy with a constant texture , 2009 .
[48] O. Ruano,et al. Effect of annealing treatments on the anisotropy of a magnesium alloy sheet processed by severe rolling , 2009 .
[49] W. Kim,et al. Effect of differential speed rolling on microstructure and mechanical properties of an AZ91 magnesium alloy , 2008 .
[50] C. Hutchinson,et al. Modeling the precipitation processes and strengthening mechanisms in a Mg-Al-(Zn) AZ91 alloy , 2005 .
[51] M. Pérez-Prado,et al. Grain Refinement in a Mg AZ91 Alloy via Large Strain Hot Rolling , 2003 .
[52] J. Nie. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys , 2003 .
[53] Mamoru Mabuchi,et al. New Recycling Process by Extrusion for Machined Chips of AZ91 Magnesium and Mechanical Properties of Extruded Bars , 1995 .