Application of topology optimization to design an electric bicycle main frame

Electric bicycle main frame is the most principal structure, connecting and supporting other various components, while bearing a variety of forces and moments. In this paper the topology optimization technology is applied to generate robust electric bicycle main frame by optimizing the material distribution subject to the constraints and dynamic loads. Geometric, mechanical and finite element models, as well as a flexible coupling dynamic model are constructed. Validity and accuracy of these models are investigated through real-life testing. By applying typical road excitation, dynamic loads of all key points are extracted. A set of forces data is extracted every 0.5 s during the whole simulation, including peak values of these forces. In order to obtain appropriate topology optimization results, the values of two crucial parameters, volume fraction and minimum member size, are discussed respectively. Then the topology optimization of multi-load case is implemented with the objective of minimizing the set of weighted compliances resulting from individual load cases. Results illustrate that element density distribution of the model is optimized with manufacturing constraints of minimum member size control and extrusion constraint. Consequently, the better frame form design of the electric bicycle is obtained. Modal analysis for the original and refined models is performed respectively to evaluate the structure stiffness. The results indicate that this optimization program is effective enough to develop a new electric bicycle frame as a reference for manufacturers.

[1]  M. Zhou,et al.  Checkerboard and minimum member size control in topology optimization , 2001 .

[2]  D. Tortorelli,et al.  Component and system reliability-based topology optimization using a single-loop method , 2010 .

[3]  George I. N. Rozvany,et al.  On the validity of ESO type methods in topology optimization , 2001 .

[4]  Ole Sigmund,et al.  A web-based topology optimization program , 2001 .

[5]  Andreas Rietz.  A first laboratory exercise in topology optimization using matlab , 2006 .

[6]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[7]  Gyung-Jin Park,et al.  Structural optimization using equivalent static loads at all time intervals , 2002 .

[8]  G. Rozvany.  Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics , 2001 .

[9]  H. Gea.  Topology optimization: A new microstructure-based design domain method , 1996 .

[10]  M. Bendsøe,et al.  Shape optimization of structures for multiple loading conditions using a homogenization method , 1992 .

[11]  O. Sigmund.  Morphology-based black and white filters for topology optimization , 2007 .

[12]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[13]  Ole Sigmund,et al.  A 99 line topology optimization code written in Matlab , 2001 .

[14]  Zhen Luo,et al.  A new procedure for aerodynamic missile designs using topological optimization approach of continuum structures , 2006 .

[15]  Hae Chang Gea,et al.  Structural configuration examples of an integrated optimal design process , 1994, DAC 1994.

[16]  Z. Gaspar,et al.  Addenda and corrigenda to: (1) “Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics" and (2) “On design- dependent constraints and singular topologies" (Vol. 21, No. 2, 2001, pp. 90–108; 164–172) , 2002 .

[17]  N. Kikuchi,et al.  A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity. , 2004, Journal of biomechanics.

[18]  C. Fleury,et al.  A family of MMA approximations for structural optimization , 2002 .

[19]  Ren-Jye Yang,et al.  Automotive applications of topology optimization , 1995 .

[20]  N. Kikuchi,et al.  Topology optimization of dielectric substrates for filters and antennas using SIMP , 2004 .

[21]  Chyi-Yeu Lin,et al.  An efficient algorithm to obtain the optimal topology of industrial structural design problems , 2008 .

[22]  K. Maute,et al.  Conceptual design of aeroelastic structures by topology optimization , 2004 .

[23]  Hampton C. Gabler,et al.  The Risk of Fatality in Motorcycle Crashes with Roadside Barriers , 2007 .

[24]  Nozomu Kogiso,et al.  Robust Topology Optimization for Compliant Mechanisms Considering Uncertainty of Applied Loads , 2008 .

[25]  Ole Sigmund,et al.  Topology optimization: a tool for the tailoring of structures and materials , 2000, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[26]  Gyung-Jin Park,et al.  Structural optimization under equivalent static loads transformed from dynamic loads based on displacement , 2001 .

[27]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[28]  Hui Wang,et al.  Experimental validation and prototyping of optimum designs obtained from topology optimization , 2006 .

[29]  David Wallace,et al.  Innovative Modern Engineering Design and Rapid Prototyping Course: A Rewarding CAD/CAE/CAM Experience for Undergraduates , 2004 .

[30]  J. Petersson,et al.  Numerical instabilities in topology optimization: A survey on procedures dealing with checkerboards, mesh-dependencies and local minima , 1998 .

[31]  Zheng-Cheng Zhong,et al.  Finite element analysis of the lumbar spine with a new cage using a topology optimization method. , 2006, Medical engineering & physics.

[32]  Wei Wu,et al.  Topology optimization of a novel stent platform with drug reservoirs. , 2008, Medical engineering & physics.

[33]  George I. N. Rozvany,et al.  On symmetry and non-uniqueness in exact topology optimization , 2011 .

[34]  Daniel A. Tortorelli,et al.  Minmax topology optimization , 2012 .

[35]  Jingzhou Yang,et al.  Study of key algorithms in topology optimization , 2007 .